Circular Connector Contacts

What are Circular Connector Contacts?

Circular connector contacts are electrical connectors that are exclusively manufactured to transmit digital data and electrical signals throughout the connection. Basically, they are attached to a wire strand embedded in a cable by using the process known as the solderless crimp mechanism, or Crimping Tool. Before the connection back shell is closed to offer strain relief, each round connector contact is then routed through the connector housing and the circular connector insert.

Features and Benefits

The modular design of Circular Connector contacts allows for the replacement of individual contacts without requiring the replacement of the entire connector. The contact material can offer defense against environmental deterioration, for instance, by halting corrosion brought on by moisture in the air in marine settings. Circular contacts are chosen by systems designers because they are simple to use, simple to mate and lock (and un-mate if necessary), and can be specified with a wide range of contact types and sizes for power, data, and communications applications, including the most recent USB and RJ45 connector specifications.

What are the types of Circular Connectors' Contacts used for?

Circular contacts usually come in different standards; the reason is to be compatible with either of two versions, named "male" or "female," since they require varied standards to be used with them. The most commonly used materials they are composed of are brass, steel, and gold plated. Moreover, as per your application needs, you are allowed to choose and even assist in choosing the best connector standards. Since the signal varies from application to application, allowing first the integrity and reliability of applications, care must be taken in choosing the contact connector, especially for high-risk applications. Sometimes, low contact resistance to overly distributed connections.

New Items

New items

60.013.11, TE Connectivity

TE Connectivity The TE Connectivity 1 mm contact socket made up of brass and it is gold plated. It's contact resistance is less than 5 mOhm. The rated maximum current is up to 10 A. 5 mm stripping length required 500 mating cycles ø1.6 x 17.7 mm dimensions

Product Detail

New items

031-8717-150, ITT Cannon

ITT Cannon Connectors APD Series Crimp Contacts 4 Way ITT Cannon APD Series crimp contacts suitable for 4 way connectors, ideal for automotive use such as traction control , brake control and sensor APD 4 way connector applications. Note For associated pin connectors see: 752-5635 , 752-5638 , 752-5632 , 752-5641 , 752-5644 , 752-5648 , 752-5657 , 752-5650 and for associated socket connectors see: 752-5610 , 752-5629 , 752-5622 , 752-5626 ITT Cannon APD Series ISO 15170 Connectors The ITT Cannon APD series of connectors are a versatile range of full plastic direct, in-line and bulkhead circular connectors, specifically designed for the transportation, off-road and special vehicle markets. These circular connectors have a strong resistance to engine transmission and brake fluids and the associated environments. The APD series is also an ideal connector for other applications including military or industrial that require harsh environment solutions while insisting on a product that is both small in size and lightweight.The APD series of connectors cover a wide range of 1 and 2-way power solutions up to 51-way interface connectors.

Product Detail

New items

192900-0633, ITT Cannon

Solder Cup Contact Suitable for 500 mating cycles ITT TNM Shielded The TNM connector range builds on the popular Trident and Neptune ranges from ITT Cannon. They feature full metal construction giving high reliability and durability. RF shielding inherent in the full metal construction Backshells enable cable braid termination so meeting EMC requirements Signal versions have the same planform & contact arrangements as the QM range so upgrading and interchangeability can be achieved Includes a rear rubber seal that enables IP67 rating to be maintained if only some contacts are used. The rubber seal can be discarded if a backshell is to be used. Both are rated to IP67 Cable, chassis and jam nut configurations available in standard and reversed formats One, two or three part crimp contacts, also solder cup and PCB terminating contacts available for signal transfer. Power contacts are only required for power/signal connector types Current Rating, (single contact in isolation) 1 Part Contact 5A 2 Part Contact 13A 3 Part Contact 13A Solder Cup Contacts 13A PCB Terminating Contacts 5A Voltage Rating 250Vac Shielding 40dB (10kHz - 100MHz) Contact Resistance 5mΩ Temperature Range -55 → 105°C

Product Detail

New items

100503L, TE Connectivity

TE Connectivity M39029 Pin and Socket Contacts A series of Mil-Spec contacts from TE Connectivity. These circular connector contacts are available in different wire gauge ranges and contact sizes. The circular connector contacts have a gold plated copper and copper alloy finishes. TE Connectivity MIL-C -38999 Accessories

Product Detail

New items

CM16SS10MQ, Souriau-Sunbank by Eaton

CONTACT SOCKET 16AWG SLDR CUP

Product Detail

New items

1618255, Phoenix Contact

CONTACT PIN SZ 1.0MM CRIMP GOLD

Product Detail

New items

210 110 090 25, Harting

Product Detail

New items

1621575, Phoenix Contact

CONTACT PIN SZ 0.8MM CRIMP GOLD

Product Detail

New items

1621579, Phoenix Contact

CONTACT PIN SZ 2.0MM CRIMP GOLD

Product Detail

New items

1-66098-8, TE Connectivity

TE Connectivity Uninsulated Signal Contacts - Multimate Series II and III+ Multimate Series II and III+ uninsulated signal Contacts for use with rectangular M series and CPC connectors. Note Stock number 782-9851 is a reel of 4000 pieces. TE Connectivity Multimate Contacts Multimate signal contacts feature a high normal force which provides a low resistance in critical applications such as dry circuit signal conditions. Mating entry is closed-ended to prevent damage from stubbing due to misalignment. Stainless steel spring provides superior normal force and retention in the housing

Product Detail

New items

1-66361-2, TE Connectivity

Crimp Contacts Type III+ Tinned brass contacts with stainless steel springs Insulation support Suitable support tools also available Selection Guide AMP ref. Type Cross-section (mm²) awg gauge Insulation Ø (mm) Colour Code 163086-1 Pin 0.3-0.6 22-20 1.1-1.8 Yellow 163082-1 Pin 0.8-1.34 18-16 2-2.5 Blue 163084-1 Socket 0.8-1.34 18-16 2-2.5 Blue Current rating 7.5A Pin diameter 1.6mm 5mm Pitch connectors For panel or free mounting Higher pinout than the Mate-N-Lok range

Product Detail

New items

193990-2, TE Connectivity

Series 1 Contacts A range of Series 1 Contacts for TE Connectivity connectors. For 1·5 - 2·5mm contacts use crimp tool stock no. 459-6252 and die set stock no. 452-6679 For all other contacts use tool stock no. 849-114 and die set stock no. 372-440 For a suitable Extraction Tool see stock number 162-5723 Contact specifications Stock no wire range mm awg Insulation dia. range contact finish wire strip length 238-094 0.2-0.6 24-20 1.02 -2.03 tin 3.17 238-101 0.8-1.4 18-16 2.03 - 2.54 tin 3.17 372-399 0.8-1.4 18-16 2.03-2.54 gold/nickel 3.17 372-850 0.2-0.6 24-20 1.02-2.03 gold/nickel 3.17 452-6657 1.5-2.5 18-14 2.03-2.54 gold 3.17 452-6663 1.5-2.5 18-14 2.03-2.54 gold 3.17 238-117 0.2-0.6 24-20 1.02 -2.03 tin 3.17 372-412 0.2-0.6 24-20 1.02 -2.03 gold/nickel 3.17 238-123 0.8-1.4 18-16 2.03 - 2.54 tin 3.17 372-434 0.8-1.4 18-16 2.03-2.54 gold/nickel 3.17 782-9886 2-2.15 14 No support gold/nickel 6.35 TE Connectivity CPC Contacts & Tooling Contacts and Tooling for Series 1, 2 and 3 of the CPC range of connectors. Shell Material Themoplastic Flammability Rating UL94V-0 Shell Finish Zinc alloy, plated nickel Current Rating Series 1, 13A in isolation Series 2, 7.5A in isolation Working Voltage 250Vac Temperature Range -55 → +125°C

Product Detail

What are Circular Connector Contacts?

Features and Benefits

What are the types of Circular Connectors' Contacts used for?

New Items

FAQs