Enclosure Heaters

New items

3105310, Rittal

Enclosure Heaters - SK Series Snap-fastening onto 35 mm support rails EN 50 022 or direct screw-fastening onto the mounting plate PTC technology with Computational Fluid Dynamics assisted design for superior heating performance Requires external Thermostat and or Hygrostat to regulate heating in the enclosure Fan assisted heat flow on models 200W and above DIN Rail Mount Enclosure Heaters Heaters specifically intended for anti-condensation and frost protection in control and equipment cabinets. All types are supplied with DIN rail mounting hardware.

Product Detail

New items

FLH250 17025015007, Pfannenberg

Fan Heater - Pfannenberg FLH 250 Plug-in terminal connection Suitable for both 50Hz and 60Hz Duty cycle 100% Heating element is resistance type with temperature monitor Fitting position is airflow vertical, exit at top Airflow 50m 3 /h (50Hz), 61m 3 /h (60Hz) Constructed from aluminium extrusion, clear anodised Binding post connection capacity: single filament 2 x 0.5 - 2.5mm 2 ; fine multi-filament (soldered, wire and sleeve, pin terminal) 2 x 0.5 - 1.5mm 2 Snap-in mounting for 35mm DIN-rail in accordance with EN 50022 Operating temperature -20°C to +70°C Storage temperature -40°C to +70°C Protection rating IP44 Note Guard (see designation +2) adds 3mm to height dimension quoted Accessories available separately include thermostats FLZ510, FLZ520, FLZ530, hygrostat FLZ600 Approvals UL

Product Detail

New items

FLH400 17040010107, Pfannenberg

Fan Heater - Pfannenberg FLH 400 Plug-in terminal connection Suitable for both 50Hz and 60Hz Duty cycle 100% Heating element is resistance type with temperature monitor Mounting position is airflow vertical, exit at top Airflow 50m 3 /h (50Hz), 61m 3 /h (60Hz) Constructed from aluminium extrusion, clear anodised Binding post connection capacity: single filament 2 x 0.5 - 2.5mm 2 ; fine multi-filament (soldered, wire and sleeve, pin terminal) 2 x 0.5 - 1.5mm 2 Snap-in mounting for 35mm DIN-rail in accordance with EN 50022 Operating temperature -20°C to +70°C Storage temperature -40°C to +70°C Note Guard adds 3mm to height dimension quoted Accessories available separately include thermostats FLZ510, FLZ520, FLZ530, hygrostat FLZ600 Approvals UL

Product Detail

New items

FLH-T1000 17099310007, Pfannenberg

Pfannenberg FLH-T Series Enclosure Heater with Thermostat Pfannenberg FLH-T series heaters with integrated thermostats have been specially developed for the most demanding environments, such as for use within wind turbines and for use in the telecommunications sector. Unique to the industry, the FLH-T series heaters are robust, reliable and long-life. Can be used under extreme conditions (-40°C to +70°C) Fan design with ball bearing: guaranteed long service life Wide range of power ratings available Approvals UL, cUL

Product Detail

New items

FGC3000, DBK Enclosures

Cirrus 60 Fan Heater High power to size ratio - 3 power settings Lightweight and easy to fit Harness length 240mm Electrical Protection Class II Independent fan circuit to aid climate cooling Operating temperature range -10 → +70°C Storage temperature range -40 → +70°C DIN Rail Mount Enclosure Heaters Heaters specifically intended for anti-condensation and frost protection in control and equipment cabinets. All types are supplied with DIN rail mounting hardware.

Product Detail

New items

Nimbus D65, 370177,01, DBK Enclosures

Nimbus D PTC Cabinet Heaters Nimbus D PTC cabinet heaters feature optimised convectional heat transfer through chimney effect, increasing reliability without switching components. Self-regulating PTC technology allows for even higher efficiency and safety due to temperature self-limitation. Rugged aluminium extrusion profile Compact design with high power density Self-regulating PTC technology Safety by temperature limitation Fixing clip can be mounted either at the widest side or the narrow side

Product Detail

New items

Nimbus D125, 370182,01, DBK Enclosures

Nimbus D PTC Cabinet Heaters Nimbus D PTC cabinet heaters feature optimised convectional heat transfer through chimney effect, increasing reliability without switching components. Self-regulating PTC technology allows for even higher efficiency and safety due to temperature self-limitation. Rugged aluminium extrusion profile Compact design with high power density Self-regulating PTC technology Safety by temperature limitation Fixing clip can be mounted either at the widest side or the narrow side

Product Detail

New items

NSYCR20WU3, Schneider Electric

The Schneider Electric ClimaSys CR range are PTC resistance heaters prevent the formation of condensation and guarantee the ideal temperature for the correct operation of the electronic components in the enclosure. The resistance heaters for electrical and electronic enclosures are equipped with PTC-type heating devices (Positive Temperature Coefficient). The insulated PTC heater comes with a large range of power levels from 10 W to 550 W. Large range of power levels Innovating design Easy installation and connection High thermal efficiency Improved convection and quick fixing

Product Detail

New items

02802.2-00, STEGO

These fan heaters prevent formation of condensation and provide an evenly distributed interior air temperature in enclosures with electric/electronic components. The heaters are connected using the internal terminal connectors. The small size of the CS / CSL 028 heaters make them ideal for use in enclosures where space is at a premium. Small, compact design Quiet in operation Dynamic heating up Clip or screw fixing

Product Detail

New items

06010.2-00, STEGO

Touch-safe heater for the use in enclosures with electrical/electronical components. The design of the heater supports the natural convection which results in a high air-current of warm air. The surface temperatures on the accessible side surfaces of the housing are kept down as a result of the heater design. Our complete range of thermostats and hygrostats can directly be connected to the heater. This heater is also available in a version with plug-in thermostat requiring no additional wiring. The heaters are designed for permanent operation. Low surface temperature Quick mounting due to clip fixing Double insulated (plastic) Wide voltage range Small size

Product Detail

New items

RS_754-5547, Pentagon Electrical Products

HVR Pentagon Anti-Condensation Heaters HVR Pentagon anti-condensation heaters have been designed for use where a low wattage heater is required to prevent condensation. They comprise a vitreous enamelled resistor mounted in a sheet steel case and have a removable perforated sheet steel cover. There is a cable entry grommet at each end and M4 terminal screws are provided on the resistor. Applications include switch and control gear cubicles. Vitreous enamelled resistor mounted in a sheet steel case. Removable perforated sheet steel cover.

Product Detail

New items

RS_754-5538, Pentagon Electrical Products

HVR Pentagon Anti-Condensation Heaters HVR Pentagon anti-condensation heaters have been designed for use where a low wattage heater is required to prevent condensation. They comprise a vitreous enamelled resistor mounted in a sheet steel case and have a removable perforated sheet steel cover. There is a cable entry grommet at each end and M4 terminal screws are provided on the resistor. Applications include switch and control gear cubicles. Vitreous enamelled resistor mounted in a sheet steel case. Removable perforated sheet steel cover.

Product Detail

New Items

3105310, Rittal

FLH250 17025015007, Pfannenberg

FLH400 17040010107, Pfannenberg

FLH-T1000 17099310007, Pfannenberg

FGC3000, DBK Enclosures

Nimbus D65, 370177,01, DBK Enclosures

Nimbus D125, 370182,01, DBK Enclosures

NSYCR20WU3, Schneider Electric

02802.2-00, STEGO

06010.2-00, STEGO

RS_754-5547, Pentagon Electrical Products

RS_754-5538, Pentagon Electrical Products

FAQs