Pneumatic Separators

New items

AFD30-F03D-A, SMC

Modular Micro Mist Separator AFD20 - AFD40 Micro mist separators from SMC are lightweight and easy to install, minimising the time spent on installation. The bowl guards in the AFD series are clear enabling users to view from any angle. Simple and interchangeable mounting Lightweight design Note Transparent bowl is for body size 30 and over Filters, Lubricators and Separators High flow capacity filters, lubricators and separators with polycarbonate bowls. All have an ambient and media temperature range of 5 - 60°C and a proof pressure of 15 bar.

Product Detail

New items

AM150C-F02D-T, SMC

AM 0.3 micron Mist Separator Used in collaboration with other air preparation elements such as water separators and coalescing filters to provide purified air free of contaminates. Mist separators remove dust particles to a size of 0.30 micrometres and oil mist. Able to provide clean air suitable for air tools, general pneumatic systems and when the removal of dust and oil particles is required. Filtration size 0.3μm (95% particle collection) Auto drain facility Minimum operating pressure 0.5 bar Proof pressure 15 bar Temperature range 5 to 60°C

Product Detail

New items

AMG250C-F02D, SMC

The SMC AMG series water separator is installed on the air pressure line to remove water drops from compressed air. Through the adoption of an element that is exclusively used for removing water droplets and the ample housing interior space, a 99% water Water removal rate 99% Max operating pressure 1.0MPa Fluororubber material Medium air pressure Drain guide IN-OUT reversal direction Degreasing wash White Vaseline

Product Detail

New items

SPC 235, PREVOST

The PREVOST cyclone water separator with float drain is made up of anodised aluminium. It is also equipped with automatic float drain. It is cost-effective and dependable operation It works on temperature between +34°F to +149°F

Product Detail

New items

AFD40-F04-A, SMC

Modular Micro Mist Separator AFD20 - AFD40 Micro mist separators from SMC are lightweight and easy to install, minimising the time spent on installation. The bowl guards in the AFD series are clear enabling users to view from any angle. Simple and interchangeable mounting Lightweight design Note Transparent bowl is for body size 30 and over Filters, Lubricators and Separators High flow capacity filters, lubricators and separators with polycarbonate bowls. All have an ambient and media temperature range of 5 - 60°C and a proof pressure of 15 bar.

Product Detail

New items

SPC 155, PREVOST

The PREVOST cyclone water separator with float drain is made up of anodised aluminium. It is also equipped with automatic float drain. It is cost-effective and dependable operation It works on temperature between +1°C to +65°C

Product Detail

New items

AME150C-F01, SMC

The SMC AME series separates and absorbs aerosol state fine oil particles in compressed air and changes the oil lubricating compressed air to oil-free equivalent air. It should be applied for filtration of compressed air requiring high cleanliness for coating lines, compressed air for clean rooms and compressed air for equipment necessary to avoid oils Indicates the filter element life by a colour change Nominal filtration rating 0.01 μm Maximum 0.01 mg/m3 oil mist density at outlet

Product Detail

New items

AM250C-02B, SMC

The SMC legacy series AM mist separator can separate and remove aerosol state oil mist in compressed air and remove particles such as carbon or dust of more than 0.01 μm. Use this product as a pre-filter for compressed air for precision instruments or cle Rated flow(ANR) 750 Port size 1/4, 3/8 Mass 0.55 kg

Product Detail

New items

AME250C-F03B, SMC

The SMC water separator can remove water droplets in compressed air. Use this product in cases where water must be avoided, but not so dry as when an air dryer is used. Through the adoption of an element that is exclusively used for removing water droplet Max. operating pressure 1.0 Map Glass fibre material

Product Detail

New items

AMD350C-F04, SMC

The SMC micro mist separators range from 1/8 to 2 and feature a rugged aluminium housing. These coalescing filters are nominally rated at 0.01 micron for a second stage of oil removal after a particulate filter and a coarser coalescing unit. Particulate filtration, oil mist separation Modular connection capable AM150C - 550C Optional element life indicator

Product Detail

New items

AFD30-F03C-A, SMC

Modular Micro Mist Separator AFD20 - AFD40 Micro mist separators from SMC are lightweight and easy to install, minimising the time spent on installation. The bowl guards in the AFD series are clear enabling users to view from any angle. Simple and interchangeable mounting Lightweight design Note Transparent bowl is for body size 30 and over Filters, Lubricators and Separators High flow capacity filters, lubricators and separators with polycarbonate bowls. All have an ambient and media temperature range of 5 - 60°C and a proof pressure of 15 bar.

Product Detail

New items

AFD30-F03-A, SMC

Modular Micro Mist Separator AFD20 - AFD40 Micro mist separators from SMC are lightweight and easy to install, minimising the time spent on installation. The bowl guards in the AFD series are clear enabling users to view from any angle. Simple and interchangeable mounting Lightweight design Note Transparent bowl is for body size 30 and over Filters, Lubricators and Separators High flow capacity filters, lubricators and separators with polycarbonate bowls. All have an ambient and media temperature range of 5 - 60°C and a proof pressure of 15 bar.

Product Detail

New Items

AFD30-F03D-A, SMC

AM150C-F02D-T, SMC

AMG250C-F02D, SMC

SPC 235, PREVOST

AFD40-F04-A, SMC

SPC 155, PREVOST

AME150C-F01, SMC

AM250C-02B, SMC

AME250C-F03B, SMC

AMD350C-F04, SMC

AFD30-F03C-A, SMC

AFD30-F03-A, SMC

FAQs