Pneumatic Profile Cylinders

Series 453 ISO 15552 Pneumatic Profile Cylinders Asco Numatic Series 453 Profiled Barrel Double-Acting Pneumatic Cylinders offer precise cushioning, a choice of mounting options, and ease of maintenance. The cylinder design includes T-slot grooves on three sides, a hard anodised aluminium-profiled barrel, precise hard chrome steel high-performance guide rod, and self-lubricating guide rod bearings with non-abrasive seal. Note Various accessories are available from RS for use with Asco Numatic profiled cylinders and include: Magnetic position detectors - RS stock nos. 721-1566 and 721-1557 , and Mounting accessories - RS stock nos. 675-6721 (fitting kit for 32mm to 40mm profiled cylinders), and 675-6724 (fitting kit for 50mm to 63mm profiled cylinders).

Cylinder Conforms to VDMA24562, ISO6431, ISO15552 and NFE49-003-1 Double-acting operation Profile barrel with concealed tie rods Low friction polyurethane piston seals and nitrile rubber ’O’-rings Fully adjustable end of stroke cushioning Flush mounting switches Medium Compressed air, filtered, lubricated or non-lubricated Operating pressure 1 to 16 bar Ambient temperature range -20°C to +80°C End covers Die cast aluminium Barrel Anodised aluminium profile Piston rod Stainless steel Note Outward Thrust and Return Thrust or Pull Figures are given at 6 bar.

P1D-S Cylinder Parker P1D - Standard Series ISO Cylinders are suitable for medium-duty operation, incorporate a magnetic piston as standard, and do not require lubricating for operation. The P1D - Standard ISO Cylinders are double-acting, offer adjustable end cushioning, and range in bore size from 32mm to 125mm. All P1D - Standard Series Cylinders incorporate a self-lubricating HDPE scraper ring and piston rod seal that enables for dry operation during applications where the grease film on the piston rod is regularly washed off. The P1D - Standard Cylinders are manufactured and supplied with an initial non-toxic, food industry approved transparent grease, that is free from PTFE and silicone. Note An external guide should be used with the P1D cylinders if they are operated in applications where significant lateral loads on the piston rod may exist. Using the P1D cylinder without an external guide may reduce the service life of the unit. Standards ISO 6431; ISO 15552; VDMA 24562; AFNOR Installational Dimensional Standards Technical specification Medium Compressed air, filtered, lubricated or non-lubricated Operating Temperature Range 10 bar max. Ambient Temperature Range -20°C to +70°C max. End covers Zinc die-cast Barrel Hard anodised aluminium Piston Stainless steel (303S31) Tie rods Zinc plated steel Seals Polyurethane