Multifunction Tester | Electrical Multifunction Tester | Multifunction Electrical Tester

New items

50.0032-33, Staubli

Ø 4 mm component holder for experimental circuit board SET4 Ø 4 mm safety component holder for experimental circuit board SET4. Component mounting: welded onto terminals supplied. Protection level: IP2X. Available in two-pole or four-pole versions. For use in education, research and development etc. Standards IEC 61010 - CAT II

Product Detail

New items

P01295398, Chauvin Arnoux

The Chauvin Arnoux P012 series is the 3-point lead with 3 separated cables. The length of the cable is the 2.5m. This point lead used with CA 6116N and CA 6117. Colour of the lead is the red, blue and green

Product Detail

New items

TP165X, Fluke

Fluke TP165X remote probe Slim line remote probe with built-in test button to facilitate one-handed measurements on Fluke 1650 & 1650B series electrical installation testers

Product Detail

New items

ADPTR-GU10-EUR, Beha-Amprobe

Ensure safe and reliable testing with the Light-Check Adapters. This Light-Check adapter is made to ensure your safety during testing light points. The adapters can be used in conjunction with a wide variety of test equipment that uses test leads terminating in 4 mm safety connectors. The adapter enables a range of tests to be conducted on light fitting terminals eliminating the need to hold test probes in place and ensure a good reliable and safe contact. Ease of use, one-hand operation Optimal and safe contact to light points Low contact resistance (important for line resistance measurement) Additional safety barrier (finger guard) Designed in a small robust housing 4 mm safety socket Maintenance free Applications Installation Testers Insulation Testers Wire Tracers Voltage Measurement and Monitoring (PQ)

Product Detail

New items

P01295236, Chauvin Arnoux

The Chauvin Arnoux P012 series is the set of 2 continuity leads for CA 6160 and CA 6165. The length of the lead is the 2.5 m. Colour of the lead is the black and red

Product Detail

New items

ADPTR-SCT-UK, Beha-Amprobe

Ensure safe and reliable testing with the Socket-check adapters. This Socket-Check adapter will ensure safe, reliable testing with optimal contact to outlet. This adapter can be used in conjunction with a wide variety of test equipment that uses test leads terminating in 4mm safety connectors. Ease of use Optimal and safe contact to outlets Low contact resistance, important for line resistance and loop impedance measurement Low contact resistance, important for earth bond measurement (UK: R1 and R2 testing) Designed in a small robust housing 4 mm safety socket Maintenance free Applications Installation Testers Insulation testers Portable Appliance Testers (PAT) Wire Tracers Voltage Measurement and Monitoring (PQ)

Product Detail

New items

ADPTR-B15-EUR, Beha-Amprobe

Ensure safe and reliable testing with the Light-Check Adapters. This Light-Check adapter is made to ensure your safety during testing light points. The adapters can be used in conjunction with a wide variety of test equipment that uses test leads terminating in 4 mm safety connectors. The adapter enables a range of tests to be conducted on light fitting terminals eliminating the need to hold test probes in place and ensure a good reliable and safe contact. Ease of use, one-hand operation Optimal and safe contact to light points Low contact resistance (important for line resistance measurement) Additional safety barrier (finger guard) Designed in a small robust housing 4 mm safety socket Maintenance free Applications Installation Testers Insulation Testers Wire Tracers Voltage Measurement and Monitoring (PQ)

Product Detail

New items

ADPTR-B22-EUR, Beha-Amprobe

Ensure safe and reliable testing with the Light-Check Adapters. This Light-Check adapter is made to ensure your safety during testing light points. The adapters can be used in conjunction with a wide variety of test equipment that uses test leads terminating in 4 mm safety connectors. The adapter enables a range of tests to be conducted on light fitting terminals eliminating the need to hold test probes in place and ensure a good reliable and safe contact. Ease of use, one-hand operation Optimal and safe contact to light points Low contact resistance (important for line resistance measurement) Additional safety barrier (finger guard) Designed in a small robust housing 4 mm safety socket Maintenance free Applications Installation Testers Insulation Testers Wire Tracers Voltage Measurement and Monitoring (PQ)

Product Detail

New items

1005-135, Megger

Product Detail

New items

ADPTR-E27-EUR, Beha-Amprobe

Ensure safe and reliable testing with the Light-Check Adapters. This Light-Check adapter is made to ensure your safety during testing light points. The adapters can be used in conjunction with a wide variety of test equipment that uses test leads terminating in 4 mm safety connectors. The adapter enables a range of tests to be conducted on light fitting terminals eliminating the need to hold test probes in place and ensure a good reliable and safe contact. Ease of use, one-hand operation Optimal and safe contact to light points Low contact resistance (important for line resistance measurement) Additional safety barrier (finger guard) Designed in a small robust housing 4 mm safety socket Maintenance free Applications Installation Testers Insulation Testers Wire Tracers Voltage Measurement and Monitoring (PQ)

Product Detail

New items

P01295393, Chauvin Arnoux

The Chauvin Arnoux P012 series is the EURO socket test lead. The colour of the socket lead is the black. Suitable for the CA 6113, CA 6116N and CA 6117

Product Detail

New items

1001-975, Megger

Megger Three Wire Fused Test Lead Set Megger three wire fused test lead set is the ideal replacement or spare test lead set for the Megger range of multi function testers. These GS38 compliant test leads are suitable for use with the Megger MFT1552, MFT1553, MFT1710, MFT1720 and MFT1730. Features and Benefits GS38 compliant Length: 1.2 m CAT III 1 kV rated with the safety probes CAT III 600 V rated when using the crocodile clips Supplied with Crocodile clips, large removable prods with GS38 probe tips, standard 4 mm plugs and built-in 600 V 10 A fast breaking fuses

Product Detail

Multifunction Tester Accessories

New Items

50.0032-33, Staubli

P01295398, Chauvin Arnoux

TP165X, Fluke

ADPTR-GU10-EUR, Beha-Amprobe

P01295236, Chauvin Arnoux

ADPTR-SCT-UK, Beha-Amprobe

ADPTR-B15-EUR, Beha-Amprobe

ADPTR-B22-EUR, Beha-Amprobe

1005-135, Megger

ADPTR-E27-EUR, Beha-Amprobe

P01295393, Chauvin Arnoux

1001-975, Megger

FAQs