Multifunction Tester | Electrical Multifunction Tester | Multifunction Electrical Tester

New items

50.0032-33, Staubli

Ø 4 mm component holder for experimental circuit board SET4 Ø 4 mm safety component holder for experimental circuit board SET4. Component mounting: welded onto terminals supplied. Protection level: IP2X. Available in two-pole or four-pole versions. For use in education, research and development etc. Standards IEC 61010 - CAT II

Product Detail

New items

P01295398, Chauvin Arnoux

The Chauvin Arnoux P012 series is the 3-point lead with 3 separated cables. The length of the cable is the 2.5m. This point lead used with CA 6116N and CA 6117. Colour of the lead is the red, blue and green

Product Detail

New items

ADPTR-GU10-EUR, Beha-Amprobe

Ensure safe and reliable testing with the Light-Check Adapters. This Light-Check adapter is made to ensure your safety during testing light points. The adapters can be used in conjunction with a wide variety of test equipment that uses test leads terminating in 4 mm safety connectors. The adapter enables a range of tests to be conducted on light fitting terminals eliminating the need to hold test probes in place and ensure a good reliable and safe contact. Ease of use, one-hand operation Optimal and safe contact to light points Low contact resistance (important for line resistance measurement) Additional safety barrier (finger guard) Designed in a small robust housing 4 mm safety socket Maintenance free Applications Installation Testers Insulation Testers Wire Tracers Voltage Measurement and Monitoring (PQ)

Product Detail

New items

P01295236, Chauvin Arnoux

The Chauvin Arnoux P012 series is the set of 2 continuity leads for CA 6160 and CA 6165. The length of the lead is the 2.5 m. Colour of the lead is the black and red

Product Detail

New items

Z503K, Gossen Metrawatt

Z503K PRO-Schuko Measuring Adapter Single-phase measuring adapter for the PROFITEST INTRO, earthing contact plugs to three 4 mm safety plugs (black, blue, yellow-green), 230 V AC, touch-guarded, measuring category: CAT III, 300 V, 16 A.

Product Detail

New items

ADPTR-SCT-UK, Beha-Amprobe

Ensure safe and reliable testing with the Socket-check adapters. This Socket-Check adapter will ensure safe, reliable testing with optimal contact to outlet. This adapter can be used in conjunction with a wide variety of test equipment that uses test leads terminating in 4mm safety connectors. Ease of use Optimal and safe contact to outlets Low contact resistance, important for line resistance and loop impedance measurement Low contact resistance, important for earth bond measurement (UK: R1 and R2 testing) Designed in a small robust housing 4 mm safety socket Maintenance free Applications Installation Testers Insulation testers Portable Appliance Testers (PAT) Wire Tracers Voltage Measurement and Monitoring (PQ)

Product Detail

New items

ADPTR-B15-EUR, Beha-Amprobe

Ensure safe and reliable testing with the Light-Check Adapters. This Light-Check adapter is made to ensure your safety during testing light points. The adapters can be used in conjunction with a wide variety of test equipment that uses test leads terminating in 4 mm safety connectors. The adapter enables a range of tests to be conducted on light fitting terminals eliminating the need to hold test probes in place and ensure a good reliable and safe contact. Ease of use, one-hand operation Optimal and safe contact to light points Low contact resistance (important for line resistance measurement) Additional safety barrier (finger guard) Designed in a small robust housing 4 mm safety socket Maintenance free Applications Installation Testers Insulation Testers Wire Tracers Voltage Measurement and Monitoring (PQ)

Product Detail

New items

ADPTR-B22-EUR, Beha-Amprobe

Ensure safe and reliable testing with the Light-Check Adapters. This Light-Check adapter is made to ensure your safety during testing light points. The adapters can be used in conjunction with a wide variety of test equipment that uses test leads terminating in 4 mm safety connectors. The adapter enables a range of tests to be conducted on light fitting terminals eliminating the need to hold test probes in place and ensure a good reliable and safe contact. Ease of use, one-hand operation Optimal and safe contact to light points Low contact resistance (important for line resistance measurement) Additional safety barrier (finger guard) Designed in a small robust housing 4 mm safety socket Maintenance free Applications Installation Testers Insulation Testers Wire Tracers Voltage Measurement and Monitoring (PQ)

Product Detail

New items

TP175, Fluke

Fluke Multimeter Test Leads and Probes Fluke multimeters benefit from the availability of a comprehensive range of extra and replacement Fluke test leads, probes and accessories. TP175 TwistGuard Test Probes comprise 2 mm diameter probe tip, patented TwistGuard. 4 mm plug. Conforms to EN61010-031:2008. CATII 1000 V, CAT III 1000 V, CAT IV 600 V. Modular adjustable length probe for use with most Fluke test lead sets that accept interchangeable probes and select Fluke mainframe units.

Product Detail

New items

1006-408, Megger

Megger Carry Pouch for MFT1700/1800 Series Meggers padded carry case for use with MFT1700 and MT1800 series of testers. Manufactured from a hard wearing nylon fabric, featuring a main compartment, pocket under the lid for test leads and an external pocket for cables and accessories. Features and Benefits Soft padded carry case Nylon fabric Internal pocket for storage

Product Detail

New items

1005-135, Megger

Product Detail

New items

ADPTR-E27-EUR, Beha-Amprobe

Ensure safe and reliable testing with the Light-Check Adapters. This Light-Check adapter is made to ensure your safety during testing light points. The adapters can be used in conjunction with a wide variety of test equipment that uses test leads terminating in 4 mm safety connectors. The adapter enables a range of tests to be conducted on light fitting terminals eliminating the need to hold test probes in place and ensure a good reliable and safe contact. Ease of use, one-hand operation Optimal and safe contact to light points Low contact resistance (important for line resistance measurement) Additional safety barrier (finger guard) Designed in a small robust housing 4 mm safety socket Maintenance free Applications Installation Testers Insulation Testers Wire Tracers Voltage Measurement and Monitoring (PQ)

Product Detail

Multifunction Tester Accessories

New Items

50.0032-33, Staubli

P01295398, Chauvin Arnoux

ADPTR-GU10-EUR, Beha-Amprobe

P01295236, Chauvin Arnoux

Z503K, Gossen Metrawatt

ADPTR-SCT-UK, Beha-Amprobe

ADPTR-B15-EUR, Beha-Amprobe

ADPTR-B22-EUR, Beha-Amprobe

TP175, Fluke

1006-408, Megger

1005-135, Megger

ADPTR-E27-EUR, Beha-Amprobe

FAQs