Biometric Fingerprint Scanner | Biometric Sensor | Biometric Fingerprint Reader

New items

SFH 7072, OSRAM Opto Semiconductors

The OSRAM biometric sensor featured with multi chip package featuring two green emitters, one red emitter, one infrared emitter and two detectors. It is used in heart rate monitoring and pulse oximetry. Light barriers to block optical crosstalk Optimized for strong PPG signal

Product Detail

New items

20-0696, TE Connectivity

Low oxygen level can put a strain on cell functioning including the heart and brain. This is critical in acute medical situations like post-op recovery. TE Connectivitys SpO2 optical components provide leading accuracy in oxygen level detection. With more than 27 years of proven reliability and expertise, TE Connectivity (TE) has designed SpO2 sensors with flexibility to accommodate multiple wavelength options. The EPM-4001 detector assembly uses a silicon planar diffused photodiode specially designed for medical applications. It features high efficiency and fast response. The EPM-4001 detector assembly is spectrally matched to emitter assemblies ELM-4001, ELM-4002 and ELM-4003. Lead Frame Construction Fast Response Matched to 660nm Emitters High Efficiency Clear Epoxy Lens Compact Package Active Area: 8.07mm2 Applications Pulse Oximetry SpO2 Finger/Ear Reusable Probes SpO2 Disposable Strip or Butterfly Probes

Product Detail

New items

BH1790GLC-E2, ROHM

Optical Pulse Sensor The BH1790GLC is an optical sensor IC from ROHM Semiconductor for biometric applications. It contains a photodiode and LED drivers integrated in one package and is used for human pulse detection via reflection of green light from the skin. The device features excellent IR filtering and high green light selectivity. Both LED drive current and duty cycle can be adjusted and an I2C interface allows communication with a suitable microcontroller. Typical application areas include wearable devices, smart phones and tablet PCs. Compact 2.8 x 2.8 mm SMT package Excellent green light wavelength selectivity Built-in Infrared filter LED drivers with current selection I2C Interface compatible with 1.8V supply Biometric Sensors, ROHM Semiconductor

Product Detail

New items

10104019-20, TE Connectivity

TE Connectivitys EPM-5001 series SMT optical detector assembly provides leading accuracy in oxygen level detection. This detector assembly uses a silicon planar diffused photodiode specially designed for medical applications. The EPM-5001 detector assembly is spectrally matched to emitter assemblies ELM-5001 and ELM-5002. Fast ResponseMatched to 660nm EmitterHigh EfficiencyClear Epoxy LensCompact PackageActive Area: 8.07mm2

Product Detail

New items

20-0584, TE Connectivity

Low oxygen level can put a strain on cell functioning including the heart and brain. This is critical in acute medical situations like post-op recovery. TE Connectivity (TE) s SpO2 optical components provide leading accuracy in oxygen level detection. With more than 27 years of proven reliability and expertise, TE has designed SpO2 sensors with flexibility to accommodate multiple wavelength options. The ELM-4000 series emitter assemblies are specially designed for medical applications where selection of peak wavelength is a key requirement. Emission source material is GaAIAs in conjunction with GaAIP complete with clear epoxy lens. 660 nm ±3 nm Peak Wavelength Red LED Three IR Wavelength Choices Dual Drive Applications Pulse Oximetry SpO2 Finger/Ear Reusable Probes SpO2 Disposable Strip or Butterfly Probes

Product Detail

New items

20-0599, TE Connectivity

Low oxygen level can put a strain on cell functioning including the heart and brain. This is critical in acute medical situations like post-op recovery. TE Connectivity (TE) s SpO2 optical components provide leading accuracy in oxygen level detection. With more than 27 years of proven reliability and expertise, TE has designed SpO2 sensors with flexibility to accommodate multiple wavelength options. The ELM-4000 series emitter assemblies are specially designed for medical applications where selection of peak wavelength is a key requirement. Emission source material is GaAIAs in conjunction with GaAIP complete with clear epoxy lens. 660 nm ±3 nm Peak Wavelength Red LED Three IR Wavelength Choices Dual Drive Applications Pulse Oximetry SpO2 Finger/Ear Reusable Probes SpO2 Disposable Strip or Butterfly Probes

Product Detail

New items

10104043-20, TE Connectivity

TE Connectivitys ELM-5001 series SMT optical emitter assembly provides leading accuracy in oxygen level detection. It is specially designed for medical applications where selection of peak wavelength and reflow solderability are key requirements. Emission source material is GaAIAs in conjunction with GaAIP complete with clear epoxy lens. 660nm ±3 nm Peak Wavelength Red LED890nm IR WavelengthDual Drive

Product Detail

New items

MAX32663AGTGFS+, Maxim Integrated

SENSOR HUB W/ B-SECUR'S FULL HEA

Product Detail

New items

D6FFASTENERP10, Omron

Product Detail

New items

SFH 7072, ams OSRAM

The OSRAM biometric sensor featured with multi chip package featuring two green emitters, one red emitter, one infrared emitter and two detectors. It is used in heart rate monitoring and pulse oximetry. Light barriers to block optical crosstalk Optimized for strong PPG signal

Product Detail

Biometric Sensor ICs

New Items

SFH 7072, OSRAM Opto Semiconductors

20-0696, TE Connectivity

BH1790GLC-E2, ROHM

10104019-20, TE Connectivity

20-0584, TE Connectivity

20-0599, TE Connectivity

10104043-20, TE Connectivity

MAX32663AGTGFS+, Maxim Integrated

D6FFASTENERP10, Omron

SFH 7072, ams OSRAM

FAQs