Multimeter Application Adapters

New items

80AK-A, Fluke

80AK-A DMM Thermocouple Adapter Adapter for adjusting K-type thermocouple connectors to fit inputs with 4-mm sockets For Fluke multimeters with temperature measurement function Measurement range and accuracy depend on the sensor Suitable for low-voltage applications (below 30 V ac, 60 V dc)

Product Detail

New items

U1186A, Keysight Technologies

U1186A Thermocouple (K-Type) and Temperature Probe Adapter The U1186A thermocouple and temperature probe adapter consists of a K-type thermocouple bead (colour yellow) and a mini-connector to dual banana plugs. For use with U1240 series DDM (699-7357 , 699-7351 ) and U1401A (665-9866 ) handheld multi-function calibrator/meter. Accuracy ±1.1°C Operating temperature range -20 to +200°C

Product Detail

New items

1641616, Fluke

Fluke 80TK Thermocouple Adaptor Plugs into any standard digital multimeter and operating through Type K thermocouple probes, converts it to a digital thermometer. Powered by PP3 battery (supplied) Measures in °C and °F Minimal stabilisation time needed as with thermocouple probes Unshrounded plugs Particularly suitable for measuring temperatures in hard to reach and hazardous areas such as: Finding hot spots in electrical connections and panels Identifying hot bearings and motor windings Identifying temperature differences in engine blocks

Product Detail

New items

U1180A, Keysight Technologies

Keysight U1180A Thermocouple Adaptor and J/K Thermocouples U1180A thermocouple adapter and lead set compatible with the U1240A & U1250A series multimeters. T/C Bead - J Type: Temperature rating (wire) -20°C - 200°C T/C Bead - K Type: Temperature rating (wire) -20°C - 200°C Includes a J/K type thermocouple adapter, thermocouple bead J-type and a thermocouple bead K-type. Agilent Accessories

Product Detail

New items

KUSB-488B, Keithley

USB-to-GPIB Interface Adapter KUSB-488B for USB Port Keithley GPIB interface solutions make it easy to add standard IEEE-488.2 bus control to any PC system. Keithley model KUSB-488B USB-to-GPIB interface turns any computer with a USB port into a fully functional GPIB controller. Its small form makes the KUSB-488B suitable for use with laptop computers in portable applications and for applications in which the computer has no available PCI plug-in board slots. The adapter is USB 2.0 compliant. Power (current @ 5Vdc): 500mA Transfer speed 1.5Mb Operating temperature 0 → 55°C (10 → 90% RH non-condensing) European Directive 2004/108/EEC Note Suitable for use with all of Keithley's GPIB-capable instruments but requires the 7010 adapter when used with the 428-PROG Supplied with Built-in 2m (6.6ft) cable Keithley Accessories

Product Detail

New items

TL225-1, Fluke

Fluke Multimeter Test Leads and Probes Fluke multimeters benefit from the availability of a comprehensive range of extra and replacement Fluke test leads, probes and accessories. Standards 1000 V CAT III, 600 V CAT IV

Product Detail

New items

P01102107Z, Chauvin Arnoux

The Chauvin Arnoux safety adapter and K-sensor temperature probe for multimeters and multimeter clamps equipped with a temperature measurement calibre with 19 mm spacing banana inputs. Measurement range from -5 to +350 °C 100 cm sensor cable length

Product Detail

New items

80T-150UA, Fluke

Fluke 80T-150U Temperature Adaptor Universal temperature adaptor utilizing a P-N semiconductor junction as the sensing element. The adaptor can be plugged into any standard multimeter with input impedence of 1MΩ or greater to provide direct temperature measurement up to 150°C. Powered by PP3 battery (supplied) Readings in °C or °F, selectable Suitable for measurement of air, surface & non corrosive liquids Battery check in off position Accuracy: Ambient temp. (+15°C → +35°C) ± 1°C from 0°C → +100°C decreasing linearly to ± 3°C at -50°C and at +150°C Ambient temp. (+0°C → +15°C & +35°C → +50 °C) ±2 °C from 0°C → +100°C decreasing linearly to ± 4 °C at -50°C and at +150°C Resolution 0.1°C on 300mV range of 3.5 digit DMM Probe body temperature range -40°C → +70 °C Cable temperature range -12°C → +70°C Probe withstand Voltage 60V d.c., 30V rms Supplied with PP3 battery and instruction leaflet.

Product Detail

New Items

80AK-A, Fluke

U1186A, Keysight Technologies

1641616, Fluke

U1180A, Keysight Technologies

KUSB-488B, Keithley

TL225-1, Fluke

P01102107Z, Chauvin Arnoux

80T-150UA, Fluke

FAQs