Horizontal Float
For materials see RS technical sheet for detailed list.
Low cost compact design
Available in Nylon, Polypropylene and Poly Phenylene Sulfide (PPS)
Consists of reedswitch and pivoted actuator magnet
Can be used for N/O or N/C operation
Internal and external mounting options available
All units WRAS approved
Mounting Styles
Internal mounting types are fitted in a 16.5mm dia. hole in the tank from the inside, and secured by a nylon nut on the outside.
External mounting types are fitted into a 23mm hole in the tank from the outside and secured by a compression seal with backnut also from the outside. 1/2 " NPT mounting types are fitted through a 1/2 " NPT or 1/2 "BSP threaded hole or boss from the outside.
Materials
Nylon is most suitable for use in some organic and inorganic chemicals and many oils.
Polypropylene is most suitable for use in water, detergents, vegetable oils, some organic and inorganic chemicals.
PPS is suitable for use in most organic and inorganic chemicals and most oils.
Note
Suitable for signal switching and for use with transistorised input/low power, suppressed coil miniature relays. Not suited for any inductive or inrush (e.g. filament lamps) loads.
Approvals
UL recognised
This float switch is designed for fitting through a tank wall from the outside where access to the internal fitting is not possible. The floatswitch is fitted in a 23 mm dia. hole in the tank from the outside and secured by a compression seal with a backnut.
Polypropylene material
External mounting
Compression seal
100cm PVC flying lead
WRAS approved
Product Application Information
This polypropylene float switch is most suitable for use in water, detergents, vegetable oils, some organic and inorganic chemicals. Typical applica...
