Seeit

0 Followers

0.0 / 5

Reviews 0 Not Rated Yet

Seeit Profile

Website
Manufacturer Type
Company Size
Location
Founded
Specialties

Reviews

5 star

(0%)

4 star

(0%)

3 star

(0%)

2 star

(0%)

1 star

(0%)

Rate

Comment

Be the first to review this manufacturer.

Don’t hesitate to ask questions for better clarification.

Featured Products

All Products

ADA-PLCC28, Seeit

ADA-PLCC28, Universal Adapter PLCC28 to DIP28 The PLCC28 to DIP28 universal adapter connect the pins of a 28-pin PLCC device to a 28-pin DIP equ...

SHOW DETAILS

ADA-SOIC16-150, Seeit

Seeit DIP Socket Adapters A range of universal adaptors from Seeit designed to convert to DIP packages. A...

SHOW DETAILS

FLASHBIOS, Seeit

FLASHBIOS, Low-Cost Universal Programmer for EPROM/EEPROM/Flash, with USB The FlashBios is a device Reader/Programm...

SHOW DETAILS

VERYPRO-798, Seeit

VERYPRO-798, Universal Programmer for 36000 devices, with ZIF48 socket, USB 2.0 VeryPro-798 is an universal programmer which supports over 42.000...

SHOW DETAILS

ADA-QFN44, Seeit

Seeit DIP Socket Adapters A range of universal adaptors from Seeit designed to convert to DIP packages. ADA-SOIC16-150 : SOP8/14/16 to DIP16 (...

SHOW DETAILS

ZCM64M, Seeit

ZCM64M, Smartcard EEPROM (Microchip, 24LC64), 8KBytes Serial IC bus EEPROM smartcard Manufacturer: Microchi...

SHOW DETAILS

PIC-02, Seeit

SEEIT PIC-02 Microcontrollers Programmer The SEEIT programmer PIC-02 will program microcontrollers such as PIC16C54 and PIC16C5x that are not su...

SHOW DETAILS

ADA-PLCC44-44, Seeit

ADA-PLCC44, Universal Adapter PLCC44 to DIP44 The PLCC44 to DIP44 universal adapter connect the pins of a 4...

SHOW DETAILS

ADA-SO28-300, Seeit

Seeit DIP Socket Adapters A range of universal adaptors from Seeit designed to convert to DIP packages. ADA-SOIC1...

SHOW DETAILS

FLASHBIOSBOX, Seeit

FLASHBIOSBOX, Universal Programmer for EPROM/EEPROM/Flash, with USB The FlashBiosBox is a device Reader/Pro...

SHOW DETAILS

VERYPRO-598, Seeit

VERYPRO-390, Universal Programmer for 21000 devices, with ZIF48 Socket, USB 2.0 VeryPro-598 is an universal programmer which supports over 22.000...

SHOW DETAILS

VERYPRO-299, Seeit

VERYPRO-290, Universal Programmer for 15000 devices, with ZIF40 Socket and USB VeryPro-299 is a low-cost universal programmer. It supports over 1...

SHOW DETAILS

Popular Categories For Seeit

Chip Programming Adapters (5)

Radiation Detectors (1)

SmartMedia Cards (3)

IC Socket Adapters (11)

Chip Programmers (19)

Categories For Seeit

Environmental Test & Measurement (1)

Radiation Detectors (1)

Popular Items

Popular items

ADA-PLCC28, Seeit

ADA-PLCC28, Universal Adapter PLCC28 to DIP28 The PLCC28 to DIP28 universal adapter connect the pins of a 28-pin PLCC device to a 28-pin DIP equivalent It accepts a PLCC device and plug into a DIP socket The pin 1 of the component is mark by hollow dot. Insert the component with this hollow dot on the top side Equivalent adapters from other manufacturers: WL-PL28-U1, PA28PL28D, SA008A Programming Adaptors

Product Detail

Popular items

ADA-SOIC16-150, Seeit

Seeit DIP Socket Adapters A range of universal adaptors from Seeit designed to convert to DIP packages. ADA-SOIC16-150 : SOP8/14/16 to DIP16 ( 454-6803 ) ADA-QFN28 : MLF28/QFN28 to DIP28 ( 919-5536 ) ADA-SSOP28 : SSOP8/14/16/28 to DIP28 ( 919-5520 ) ADA-SO28-300 : SOP18/28 to DIP28 ( 509-6292 ) ADA-PLCC32-32 : PLCC32 to DIP28 / DIP32 ( 454-6819 ) ADA-PLCC32 : PLCC32 to DIP32 ( 919-5539 ) ADA-TQFP32 : TQFP32 to DIP32 ( 919-5532 ) ADA-TSOP32-14 : TSOP32 to DIP32 ( 509-6309 ) ADA-TSOP32-20 : TSOP32 to DIP32 ( 454-6831 ) ADA-QFN44 : MLF44/QFN44 to DIP44 ( 919-5545 ) ADA-PLCC44 : PLCC44 to DIP44 ( 454-6825 ) ADA-TSOP48-20 : TSOP32/40/48 to DIP48 ( 454-6847 ) Programming Adaptors

Product Detail

Popular items

FLASHBIOS, Seeit

FLASHBIOS, Low-Cost Universal Programmer for EPROM/EEPROM/Flash, with USB The FlashBios is a device Reader/Programmer/Copier supporting CMOS EPROMs (2716 to 27C801 family) of 16Kb to 8Mb, parallel EEPROMs (28C16 to 28C040 family) up to 4Mb, parallel FLASH memory (28xxx, 29xxx, 37xxx, 39xxx, 49xxx, etc) of 512Kb to 8Mb, IC and SPI EEPROMs memory (24Cxx, 25Cxx) and SPI FLASH memory (25Fxxxx) until 256Mb. It is equipped with a LED indicating the different status of the programmer, a USB port, a high quality tulip socket supporting devices in DIP packages of 8, 24, 28 or 32 pins and a PLCC32 socket supporting any 32-pin FLASH memory. The FlashBios connects to the USB port of any compatible PC and does not require any external power supply which makes it very practical to use at the office or on a business trip. Its integrated supply runs all the devices requiring a supply of 2.5V / 3.3V / 5.0V / 12V / 12.5V / 13V / 21V and 25V. New 32-pin devices can be added to the software list on request and the updates can be downloaded freely from our website. The software works with Windows 98/ME/2000/XP/Vista/Windows7 (32-bit and 64-bit). Accepts standard file formats: BINARY, INTEL (Extended) HEX, INTEL HEX16, Motorola S19/S28/S37 records Read / Write / Blank-Check Write / Verify / Blank-Check / Erase functions Support low voltage devices from 2.5V to 5.0V Support high Vpp programming voltage: 12V / 12.5V / 13V / 21V / 25V No need of exterior adapter for all DIP package devices : DIP8, DIP24, DIP28 and DIP32 PLCC32 adapter on board to program parallel FLASH memory SPI connectors to program on board devices, (Gnd, Vdd, Vpp, DATA0, DATA1, DATA2, DATA3, DATA4, DATA5, DATA7) Supports Windows 98 / ME / 2000 / XP / Vista / Windows 7 (32-bit and 64-bit) with 10MB of spare capacity Dimensions board: 140 x 100 x 15 mm Kit Contents Programmer with tulip DIP8 and DIP32 package, PLCC32 and SPI con...

Product Detail

Popular items

VERYPRO-798, Seeit

VERYPRO-798, Universal Programmer for 36000 devices, with ZIF48 socket, USB 2.0 VeryPro-798 is an universal programmer which supports over 42.000 different components. It support a large range of microcontrollers PIC or ATMEL until 100 pins TQFP or NAND FLASH until 93 pins in FBGA with optional adapters. For all others components in SDIP package until 48 pins, it doesnt need any adapters, because all pins are universals. Equipped with an USB 2.0 port it is very fast to read or program or verify a component. With several components it can works without wall transformer, on USB port only. The VeryPro-596 program EPROMs of 24/28/32/40 pins (2716 to 27C4096-27C800), parallel EEPROMs (2804 to 28C040), more than 6.000 serials EEPROMS (17xx / 24xx / 25xx / SST25Fxx / 29xx / 35xx / 58xx / 59xx / 60xx / 64xx / 85xx / 93xx / 95xx / Pioneer / Bosch), FLASHs memory (28Fxxx / 29Fxxx / 29F160 / 29F800 / 37xxx / 39xxx / 49xxx) included NAND FLASH in BGA package until 93 pins, more than 7.000 microcontrollers (77Cxx / 87Cxx / 87C52x / 89Cxx / 97Cxx / AT90Sxxxx / ATmegaxx / ATtinyxx / PIC10Fxx / PIC12Cxx / PIC12Fxx / PIC16Cxxx / PIC16Fxxx / PIC18Cxxx / PIC18Fxxx / PIC24HJxxx / dsPIC30Fxx / dsPIC33Fxx), PLDs (ATFxxx / GALxxx / PALCExxx / PALLVxxx / M4Axxx / PEELxxx / isPLSIxxx / XCxxx). It has an IC test software to identify logic components (C-mos4000 / 74xxx / LM324 / LM339 / ULN20xx / ULN28xx) and it can test Static RAM / Dynamic DRAM. Accept low voltage components until 1,5V and has an autotection for poors pins contacts. The software works with Windows XP/VISTA/Windows7/Windows8.1/Windows10 (32bits and 64 bits). Accepts standard file formats: JEDEC, INTEL (Extended) HEX, HOLTEK, EMC(.CDS), INTEL HEX16, Motorola S record, BINARY, Tektronix (linear & segmented), and auto find format. Manages 16 and 32 bit word split (Set Programming). Features Test Vector capability and multiarray fuse map editor. Automaticly identifies the manufacturer and type of E(E)PROMs, auto identifies T...

Product Detail

Popular items

ADA-QFN44, Seeit

Product Detail

Popular items

ZCM64M, Seeit

ZCM64M, Smartcard EEPROM (Microchip, 24LC64), 8KBytes Serial IC bus EEPROM smartcard Manufacturer: Microchip with part number reference: 24LC64 Memory size : 64Kbits (80192 Bytes of 8-bits) Blank Smartcard without any software to create a prototype IC standard 2-wires serial interface programming only Read / Write mode: see datasheet of Microchip 24LC64 for details Power supply: 1.8V to 5.5V Erase / Write cycles: 1,000,000 times minimum Data retention: 200 years minimum Maximum Frequency: 400KHz Temperature: -40°C to +85°C Dimensions: 85 x 53 x 1 mm Weight: 10g

Product Detail

Popular items

PIC-02, Seeit

SEEIT PIC-02 Microcontrollers Programmer The SEEIT programmer PIC-02 will program microcontrollers such as PIC16C54 and PIC16C5x that are not supported by PIC-01. The connection is made via a parallel lead (supplied) Sub D25M - Sub D25F to the parallel port of your PC and operates with the PP5X software under DOS or Windows 95/98/ME (32bits). Tulip sockets for 18 pin and 28 pin DIP packages Supports: PIC16C54, PIC16C56amd PIC16C58 Supported by PP5X: PIC16C54, PIC16C55, PIC16C56 and PIC16C57 Supplied with Parallel extension cable CD-ROM Software Instruction manual: French and English Note Requires a 12V DC/ 300mA unregulated or 16 V DC/300mA regulated power supply PC Based Programmers

Product Detail

Popular items

ADA-PLCC44-44, Seeit

ADA-PLCC44, Universal Adapter PLCC44 to DIP44 The PLCC44 to DIP44 universal adapter connect the pins of a 44-pin PLCC device to a 48-pin DIP equivalent It accepts a PLCC44 device and plug into a DIP socket You can use it for EPROMs, Flash memory, Microcontrollers and PLD The pin 1 of the component is mark by hollow dot. Insert the component with this hollow dot on the top side The jumper is use for WSI (Waferscale Integration) PSD3xxx components. Do not connect it for other components Equivalent adapters from other manufacturers: WL-PL44-U1, PA44-48U, SA244 Programming Adaptors

Product Detail

Popular items

ADA-SO28-300, Seeit

Product Detail

Popular items

FLASHBIOSBOX, Seeit

FLASHBIOSBOX, Universal Programmer for EPROM/EEPROM/Flash, with USB The FlashBiosBox is a device Reader/Programmer/Copier supporting EPROMs (2716 to 27C801 family) of 16Kb to 8Mb, parallel EEPROMs (28C16 to 28C040 family) up to 4Mb, parallel FLASH memory (28xxx, 29xxx, 37xxx, 39xxx, 49xxx, etc) of 512Kb to 8Mb, I²C and SPI EEPROMs memory (24Cxx, 25Cxx) and SPI FLASH memory (25Fxxxx) until 256Mb. It is equipped with a LED indicating the different status of the programmer, a USB port, a high quality ZIF32 socket supporting devices in DIP packages of 8, 24, 28 or 32 pins and a PLCC32 socket supporting any 32-pin FLASH memory. The FlashBiosBox connects to the USB port of any compatible PC and does not require any external power supply which makes it very practical to use at the office or on a business trip. Its integrated supply runs all the devices requiring a supply of 2.5V / 3.3V / 5.0V / 12V / 12.5V / 13V / 21V and 25V. New 32-pin devices can be added to the software list on request and the updates can be downloaded freely from our website. The software works with Windows 98/ME/2000/XP/Vista/Windows7 (32-bit and 64-bit). Accepts standard file formats: BINARY, INTEL (Extended) HEX, INTEL HEX16, Motorola S19/S28/S37 records Read / Write / Blank-Check Write / Verify / Blank-Check / Erase functions Support low voltage devices from 2.5V to 5.0V Support high Vpp programming voltage: 12V / 12.5V / 13V / 21V / 25V Not need exterior adapter for all DIP package devices : DIP8, DIP24, DIP28 and DIP32, (ZIF32 socket) PLCC32 adapter on board to program parallel FLASH memory SPI connectors to program on board devices, (Gnd, Vdd, Vpp, DATA0, DATA1, DATA2, DATA3, DATA4, DATA5, DATA7) Supports Windows 98 / ME / 2000 / XP / VISTA / Windows 7 (32-bit and 64-bit) with 10MB of spare capacity Dimensions board: 150 x 125 x 38 mm Kit Contents Programmer with ZIF32 socket, ...

Product Detail

Popular items

VERYPRO-598, Seeit

VERYPRO-390, Universal Programmer for 21000 devices, with ZIF48 Socket, USB 2.0 VeryPro-598 is an universal programmer which supports over 22.000 different components among EPROMS with 24/28/32/40 pins (2716 to 27C4096-27C800), parallel EEPROMS (2804 to 28C040), serial EEPROMS (17xx / 24xx / 25xx / SST25Fxx / 29xx / 35xx / 58xx / 59xx / 60xx / 64xx / 85xx / 93xx / 95xx / Pioneer / Bosch), FLASHs memories until 48 pins (28Fxxx / 29Fxxx / 29F160 / 29F800 / 37xxx / 39xxx / 49xxx), populars microcontrollers (77Cxx / 87Cxx / 87C52x / 89Cxx / 97Cxx / AT90Sxxxx / ATmegaxx / ATtinyxx / PIC12Cxx / PIC16Cxx / PIC12Fxx / PIC16Fxxx), and PLDs (ATF16Vxx / ATF20Vxx / ATF22Vxx /GAL16Vxx / GAL20Vxx / GAL22Vxx / PALCE16Vxx /PALCE20Vxx / PALCE22Vxx / PEEL22CV10). autodetection of inserted EPROMs. It has an IC test software to identify logic components (C-mos4000 / 74xxx / LM324 / LM339 / ULN20xx / ULN28xx) and it can test Static RAM / Dynamic DRAM. Accepts low-voltage components until 1,8V and has an autotection for poors pins contacts. It does not need any adapter for all components in SDIP package. With severals components it can work without wall transformers, on USB port only. The software works with Windows XP/VISTA/Windows7/Windows8/Windows10 (32bits and 64 bits). Accepts standard file formats: JEDEC, INTEL (Extended) HEX, HOLTEK, EMC(.CDS), INTEL HEX16, Motorola S record, BINARY, Tektronix (linear & segmented), and auto find format. Manages 16 and 32 bit word split (Set Programming). Features Test Vector capability and multiarray fuse map editor. Optimum programming for each individual device. Automaticly identifies the manufacturer and type of E(E)PROMs, auto identifies TTL/CMOS logic IC. Device insertion test and poor pin contact check. Modify algorithm parameters. Support down to 1,8V low voltage devices. Set addresses intelligently, such as device start address, device end address, from buffer address and so on. Not need exterior adapter for mostly devices. Universal D...

Product Detail

Popular items

VERYPRO-299, Seeit

VERYPRO-290, Universal Programmer for 15000 devices, with ZIF40 Socket and USB VeryPro-299 is a low-cost universal programmer. It supports over 19.000 different components as EPROMS until 32 pins (2764 to 27C801), parallel EEPROMS (2804 to 28C040), serial EEPROMS (24xx / 25xx / 35xx / 58xx / 59xx / 60xx / 64xx / 85xx / 93xx / 95xx...), FLASH memories in 32 pins (28Fxxx / 29Fxxx / 37xxx / 39xxx / 49xxx), populars microcontrollers (87Cxx / 89Cxx / AT90Sxx / PIC12Cxx / PIC16Cxx / PIC12Fxx / PIC16Fxxx) and PLDs (ATF16Vxx / ATF20Vxx / ATF22Vxx / GAL16Vxx / GAL20Vxx / GAL22Vxx). It has an IC test software to identify logic components (C-mos4000 / 74xxx / LM324 / LM339 / ULN20xx / ULN28xx) and it can test Static RAM / Dynamic DRAM. Il can accept low voltage components until 1,8V and has an autodetection for poors pins contacts. With severals components it can work without wall transformer on USB port. The software works with Windows 98/ME/2000/XP/VISTA/Windows7/Windows8/Windows10 (32bits and 64 bits). Accepts standard file formats: JEDEC, INTEL (Extended) HEX, HOLTEK, EMC(.CDS), INTEL HEX16, Motorola S record, BINARY, Tektronix (linear & segmented), and auto find format. Manages 16 and 32 bit word split (Set Programming). Features Test Vector capability and multiarray fuse map editor. Test TTL/CMOS logic ICs and Dynamic/Static Random Access Memory devices. Optimum programming for each individual device. Automaticly identifies the manufacturer and type of E(E)PROMs, auto identifies TTL/CMOS logic IC. Device insertion test and poor pin contact check. Modify algorithm parameters. Set addresses intelligently, such as device start address, device end address, from buffer address and so on. Support down to 1,8V low voltage devices. Not need exterior adapter for mostly devices. Universal DIP, PLCC, QFP, TSOP, PSOP, SOIC, SSOP, SDIP adapters. Auto-run mode starts programming automatically upon detection of chip insertion. Auto system test. Mass production mode. Supports Windows...

Product Detail