Terasic

Terasic GPIO-HSTC Adapter Board The HTG Card is designed to convert a High-Speed Terasic connector (HSTC) or a High-Speed Mezzanine connector (HSMC) I/Os to three 40-pin expansion prototype connectors, which are compatible with Altera DE3/DE2-115/DE2/DE1/DE0 expansion headers. Users can connect up to three Altera DE3/DE2-115/DE2/DE1/DE0 boards (or associated daughter cards) onto a HSTC/HSMC-interfaced host board via a HTG Card. Convert HSTC/HSMC-interfaced I/O to standard 40-pin expansion connectors Allow users to connect Altera DE3/DE2-115/DE2/DE1/DE0 boards to a HSTC/HSMC-interfaced host board Provide test points for signal measurement An FPGA is a semiconductor device consisting of a matrix of Configurable Logic Blocks (CLBs) connected through programmable interconnects. The user determines these interconnections by programming SRAM. A CLB can be simple (AND, OR gates, etc) or complex (a block of RAM). The FPGA allows changes to be made to a design even after the device is soldered into a PCB.

Cyclone IV DE0-Nano Starter Kit The DE0-Nano board introduces a compact-sized FPGA development platform suited for prototyping circuit designs such as robots and "portable" projects. The board is designed, to be used in the simplest possible implementation targeting the Cyclone IV device with up to 22320 LEs. The advantages of the DE0-Nano board include its size, weight and its ability to be reconfigured without carrying superfluous hardware. These features set it apart from other general purpose development boards. Parallax has made all the design files for their 8-core Propeller microcontroller Open Source. Details of how to program the DE0-Nano as a Propeller together with all the necessary files can be found at: http://www.parallax.com/microcontrollers/propeller-1-open-source Altera Cyclone IV EP4CE22F17C6N FPGA, 22320 x Logic Elements, 594Kb memory, 66 x multipliers, 4 x PLLs, Maximum 153 x I/O pins 64 MB configuration Flash memory 50 MHz clock oscillator 32 MB SDRAM 2Kb I2C EEPROM ADXL345 3-axis accelerometer ADC128S022, 8-Channel, 12-bit A/D Converter, 50ksps to 200ksps 8 x green LEDs 2 x debounced push buttons 4 x dip switches Power supply: Mini USB connector (5 V), Two GPIO header pins (5 V), 2-pin external power header (+3.6 to +5.7 V) On-board USB-Blaster circuit for programming Two 40-pin headers provide 72 x digital I/O pins One 26-pin header provides 16 x digital I/O pins and 8 x analogue input pins Supplied with USB cable, System CD, Altera complete design suite free package, Quick Start Guide An FPGA is a semiconductor device consisting of a matrix of Configurable Logic Blocks (CLBs) connected through programmable interconnects. The user determines these interconnections by programming SRAM. A CLB can be simple (AND, OR gates, etc) or complex (a block of RAM). The FPGA allows changes to be made to a design even after the device...

Cyclone IV Industrial Network Development Kit The Industrial Networking Kit (INK) offers a comprehensive development platform for industrial communications and automation applications. The kit consists of the DE2-115 board featuring the Altera Cyclone® IV device and an Industrial Communications Board (ICB-HSMC) that supports RS-485, RS-232, CAN, and additional I/O expansion. The INK gives industrial equipment designers greater flexibility in implementing real-time Ethernet communications with the availability of Industrial Ethernet IP cores. Cyclone IV EP4CE115 with 114480 logic elements, 3888kbits Embedded memory, 266 Embedded 18 x 18 multipliers, 4 General-purpose PLLs, 528 User I/Os EPCS64 serial configuration device On-board USB-Blaster circuitry JTAG and AS mode configuration supported 128MB (32Mx32bit) SDRAM 2MB (1Mx16) SRAM 8MB (4Mx16) Flash memory with 8-bit mode 32Kbit EEPROM 18 x switches and 4 x push-buttons 18 x red and 9 x green LEDs 8 x 7-segment displays 24-bit CODEC Line-in, line-out, and microphone-in jacks 16 character x 2 line LCD module 3 x 50MHz oscillator clock inputs SMA connectors (external clock input/output) SD card slot provides SPI and 4-bit SD mode for SD Card access Integrated 10/100/1000 Gigabit Ethernet Support for Industrial Ethernet IP cores USB Type A and B sockets provide host and device controller compliant with USB 2.0 VGA socket: VGA DAC (high-speed triple DACs) RS-232 port with flow control Infrared receiver module TV-in connector with TV decoder (HTSC/PAL/SECAM) Supplied with ICB-HSMC communications board, USB cable, remote control, 2 x wires strips, 2 x 1-pin headers, 6 x silicon footstands, Design Suite DVD, INK System CD An FPGA is a semiconductor device consisting of a matrix of Configurable Logic Blocks (CLBs) connected through programmable interconnects. The user determines these interconnections by programming SRAM. A CLB can be simple (AND, OR gates, etc) or complex (a block of RAM). The FPGA allows changes t...