Self Amalgamating Tapes

New items

SCOTCH 23 9.15X19, 3M

Scotch ™ 23 self-amalgamating tapes Self-amalgamating tapes made from an insulating elastomer, usable at low, medium and high voltages. The layers amalgamate into a homogeneous mass after application. Applications: reconstitution of insulating cable up to 69 kV, replacing soldering, metal braids on lead sheathing, making waterproof joints. Dielectric strength: 31.5 kV/mm Colour: black Elongation at break: 1000% Temperature resistance - continuous: 90 °C - peak: 130 °C Thickness: 0.76 mm

Product Detail

New items

VST 9130 25mm x 100m, Hi-Bond

Hi-Bond VST 9130 High Performance Bonding Tape This high-performance, clear transfer UV acrylic adhesive is 130 microns thick with excellent high-temperature resistance up to 250°C (short-term), with outstanding long-term bond strength, making it ideal for bonding small components or thin materials. Applications: High temperature application High performance bonding of thin materials such as fascia panels on control boards, plastics/metals in thin sheet form For bonding applications that have to withstand high temperatures Hi-Bond Tapes

Product Detail

New items

Teroson RB81 20x2mm, Teroson

Black, very high tackiness and adhesion strength butyl sealant, available as a sealing tape for cold application or pumpable from a drum when heated. TEROSON® RB 81 is a butyl sealant with very high tackiness and very high strength adhesion. This latest generation product provides improved performance both as a sealing tape that is applied at room temperature and as a pumpable product when heated to temperatures between +80 and +160°C. Both are suitable for use on a very wide range of substrates. Service temperature is -40 to +80°C. Very high tackiness Very high adhesion strength Very good water and ageing resistance Self-welding Excellent adhesion to almost all substrates No corrosive constituents

Product Detail

New items

285988, T-REX

The T-Rex® ferociously strong waterproof tape provides tough waterproof adhesion under wet and dry conditions. Built with R-Flex Technology™, T-Rex waterproof tape can stretch up to 700% of its original length. Its strong enough to be used for general purpose indoor or outdoor fixes that require a waterproof seal, like repairing a rip in an above ground pool or temporarily stopping a leak in a water pipe. Or, apply it underwater and push it into cracks and rough, dirty surfaces. Formulated to withstand extreme temperatures from -70°F to 200°F, its UV-resistant formulation wont break down under harsh sunlight. T-Rex waterproof tape is flexible, ferociously strong, and waterproof like no other. Rubber based adhesive Carrier/Backing Low density polyethylene (LDPE) Release liner paper Thickness 28 mils carrier, adhesive Adhesion 320 oz / inch to stainless steel test panel Tensile strength 15 lbs / inch longitudinal Elongation 700% Core 3 inch diameter Performance temperature 70 F to 200 F Waterproof backing enhanced with R-Flex Technology™ for greater durability Can be used underwater UV resistant

Product Detail

New items

283037, DUCK TAPE

The DUCK TAPE wrap fix repair tape is a self bonding, non adhesive silicone tape. It can hold up to all types of weather conditions, making it ideal for fixes that need long lasting hold and protection. This multi use DIY tape is the perfect tool to have on hand for quick repairs around the home or job site. Just wrap around pipes, insulation, hoses or tools the tape is designed to create a watertight seal around repair without the need of additional adhesives or tools. Width 25 mm Length 3 m It is ideal for plumbing, auto and marine use UV, chemical and weather resistant

Product Detail

New items

4600 3mx25mm, Tesa

tesa® 4600 Self-Amalgamating Tape tesa® 4600 is a strong self-amalgamating tape made from silicone which bonds without adhesive. Because of the flexible material, it fits perfectly on different surfaces and to ensure a prompt, hermetic seal. Silicone strong self-fusing tape Leaving no residues after removal Elongation at break 600 % Dielectric strength 8 kV Resistant to various chemical substances, oils, acids, solvents, salt water, UV radiation and high temperatures Applications: insulating and protecting wiring and connections, sealing applications in engine compartment Standards UL 510

Product Detail

New items

RS_494-427, Advance Tapes

PIB (polyisobutylene) Self Amalgamating Tape A strong PIB self amalgamating tape that acts as an excellent watertight seal. Ideal for marine use, protecting fittings against salt corrosion and rope chafing. Also suitable for insulating and waterproofing of electrical connections, sealing satellite dish cabling, temporary and emergency repair of plumbing joints and water pipes. 17 kV/mm breakdown voltage Excellent service temperature range Resistant to a wide range of chemicals Water, UV, ozone and corrosion resistant

Product Detail

New items

VST 9130 50mm x 100m, Hi-Bond

Hi-Bond VST 9130 High Performance Bonding Tape This high-performance, clear transfer UV acrylic adhesive is 130 microns thick with excellent high-temperature resistance up to 250°C (short-term), with outstanding long-term bond strength, making it ideal for bonding small components or thin materials. Applications: High temperature application High performance bonding of thin materials such as fascia panels on control boards, plastics/metals in thin sheet form For bonding applications that have to withstand high temperatures Hi-Bond Tapes

Product Detail

New items

101355, Never Let Go

The Never Let Go tether tape uses advanced self-fusing silicone technology to create load rated tether points on any tool within seconds. It comes in green colour. No heat source or other specialist tools are required to fit Tether Tape™ as it is simply activated by stretching. It fully bonds to itself within 24 hours at room temperature, but is tested and certified for immediate use. It features a fibreglass reinforcement mesh for exceptional strength, durability and resistance against tears and punctures. It is adhesive free design means no sticky residue left on the tool when removed. Adds comfortable ergonomic grip to tool handles Effective temperature range from -50°C to 250°C Handles maximum 5kg weight

Product Detail

New items

3-2042-00-13, Raytech

Self Amalgamating Silicone Rubber Tape Self-amalgamating Silicone rubber tape for covering medium & high voltage terminations on extruded cables up to Um 72 kV. Suitable for use on electrical installations in damp or polluted environments, against corrosion, corona and against ageing. Can be used as an insulation up to 180°C Conforms to ASTM-D-2146, MIL-I-46852A. Weather Proofing & Repair

Product Detail

New items

Teroson RB81 60x2mm, Teroson

Black, very high tackiness and adhesion strength butyl sealant, available as a sealing tape for cold application or pumpable from a drum when heated. TEROSON® RB 81 is a butyl sealant with very high tackiness and very high strength adhesion. This latest generation product provides improved performance both as a sealing tape that is applied at room temperature and as a pumpable product when heated to temperatures between +80 and +160°C. Both are suitable for use on a very wide range of substrates. Service temperature is -40 to +80°C. Very high tackiness Very high adhesion strength Very good water and ageing resistance Self-welding Excellent adhesion to almost all substrates No corrosive constituents

Product Detail

New items

AT79, Advance Tapes

PE (polythene) Self Amalgamating Tape For insulating, sealing, splicing and repair ot trailing cables, waterproofing of electrical connections and temporary and emergency repair of plumbing joints. 34 kV/mm breakdown voltage Water, UV and ozone resistant, and resistant to a wide range of chemicals including alkalis, hydraulic fluids and vegetable oils Strong, elastic, easily applied High dielectric strength Advance Tapes Self Amalgamating Tape The Advance Tapes AT79 black non-adhesive, polyisobutylene-based self-amalgamating tape with strong elastic qualities backed by a thin film that can be stripped off cleanly and easily. This tape is 0.75mm thick, 19mm wide and 10m long. It is a strong, PIB self-amalgamating tape that acts as an excellent watertight seal. Features and Benefits Breakdown voltage is 34kV/mm Water, UV and ozone resistant and also resistant to a wide range of chemicals, including alkalis, hydraulic fluids and vegetable oils Easy unwind Extremely flexible High dielectric strength The tape is strong, elastic and easily applied Excellent conformability to awkward shapes Breaking load is 12N/cm Elongation is 600% Applications Insulating Sealing Splicing, repairs and trailing cables Waterproofing of electrical connections and temporary and emergency repairs of plumbing joints Certifications ISO 9001

Product Detail

What are self-amalgamating tapes?

Benefits of self-amalgamating tapes:

Electrical Applications:

Plumbing Applications:

Automotive Applications:

New Items

SCOTCH 23 9.15X19, 3M

VST 9130 25mm x 100m, Hi-Bond

Teroson RB81 20x2mm, Teroson

285988, T-REX

283037, DUCK TAPE

4600 3mx25mm, Tesa

RS_494-427, Advance Tapes

VST 9130 50mm x 100m, Hi-Bond

101355, Never Let Go

3-2042-00-13, Raytech

Teroson RB81 60x2mm, Teroson

AT79, Advance Tapes

FAQs