Hygrostats

New items

FLZ610 17218100000, Pfannenberg

FLZ 610 Hygrostat-thermostat Combination Device FLZ series hygrostats switch on control cabinet heaters or filterfans when a preset relative humidity is exceeded. The relative humidity is kept above the dew point and the condensation of water on electrical components, and corrosion of unprotected sheet metal, is prevented. The electronic combination device unites in one housing the thermostat and hygrostat, which monitor relative humidity and temperature independently of each other. Features and Benefits: Setting range 40 - 90% RH / 0°C → +60°C Switching temperature difference approx 2K+1K/approx 4% RH ± 1% Contact resistance Operating temperature range -20 → +60°C Protection rating IP20 Screw terminal connection for cable cross-section 0.5 → 2.5mm sq Snap fastening for 35mm profile bars according to EN 60715 Colour RAL 7035 Approvals UL, cUL Approvals UL, cUL

Product Detail

New items

01230.0-00, STEGO

Stego Electronic Hygrotherm - ETF 012 Series The Stego ETF 012 series electronic hygrotherm senses the ambient temperature and relative humidity in an enclosure with electric/electronic components and turns on a heater (or alternatively a fan) at either set point, helping to prevent the formation of condensation in the enclosure. Due to the wide voltage range of the Stego ETF 012 series hygrotherm, the device can be utilised anywhere in the world. The optional external sensor can be positioned freely anywhere in the enclosure for precise measurements. Temperature and humidity adjustable Wide voltage range Operating temperature down to -40°C High switching capacity With optional external sensor

Product Detail

New items

01231.0-01, STEGO

Stego Electronic Hygrotherm - ETF 012 Series The Stego ETF 012 series electronic hygrotherm senses the ambient temperature and relative humidity in an enclosure with electric/electronic components and turns on a heater (or alternatively a fan) at either set point, helping to prevent the formation of condensation in the enclosure. Due to the wide voltage range of the Stego ETF 012 series hygrotherm, the device can be utilised anywhere in the world. The optional external sensor can be positioned freely anywhere in the enclosure for precise measurements. Temperature and humidity adjustable Wide voltage range Operating temperature down to -40°C High switching capacity With optional external sensor

Product Detail

New items

01245.9-00, STEGO

Stego AC Electronic Hygrostats, EFR 012 Series These sense the relative humidity in an enclosure with electric/electronic components and turn on a heater at the set point, helping prevent the formation of condensation in the enclosure. The adjustment knob contains an LED which indicates when the connected heater is in operation. Adjustable and pre-set relative humidity Optical operating display (LED) High switching capacity Clip for 35mm DIN rail, EN 50022 Temperature compensated Small size 64.5 x 42 x 38 mm Plastic casing according to UL94 V-0, light grey Maximum switching capacity (relay output): 250Vac, 8(1.6)A; 120Vac 8(1.6)A; 24Vdc 4A Service life >50,000 cycles EMC according to EN 55014-1-2, EN 61000-3-2, EN 61000-3-3 Connection 5-pole terminal , clamping torque 0.5Nm max: rigid wire 2.5mm 2 ; stranded wire (with wire end ferrule) 1.5mm 2 Operating/storage temperature 0 to +60°C/-20 to +70°C Maximum storage humidity 90% RH (without condensation) IP20 Approvals -

Product Detail

New items

NSYCCOHY230VID, Schneider Electric

Climasys CC - electronic hygrostat - 200…240 V - Hr 20…80% - OLED screen

Product Detail

New items

01245.2-00, STEGO

Stego Electronic Hygrostat 12-48Vdc, EFL 012 EFL 012 Electronic Hygrostats will register the surrounding relative humidity and can switch a signal current using an internal relay. EFL 012 models can directly control signal processing devices. There is an LED integrated into the adjustment knob which shows the closed status of the contact 1-2. When the relative humidity drops contact 1-2 opens and the LED turns off. In a current less state contact 1-2 opens. large setting range. Small hysteresis. optical operating display. change over contact. Signal application.

Product Detail

New items

01246.0-00, STEGO

Stego AC Electronic Hygrostats, EFR 012 Series These sense the relative humidity in an enclosure with electric/electronic components and turn on a heater at the set point, helping prevent the formation of condensation in the enclosure. The adjustment knob contains an LED which indicates when the connected heater is in operation. Adjustable and pre-set relative humidity Optical operating display (LED) High switching capacity Clip for 35mm DIN rail, EN 50022 Temperature compensated Small size 64.5 x 42 x 38 mm Plastic casing according to UL94 V-0, light grey Maximum switching capacity (relay output): 250Vac, 8(1.6)A; 120Vac 8(1.6)A; 24Vdc 4A Service life >50,000 cycles EMC according to EN 55014-1-2, EN 61000-3-2, EN 61000-3-3 Connection 5-pole terminal , clamping torque 0.5Nm max: rigid wire 2.5mm 2 ; stranded wire (with wire end ferrule) 1.5mm 2 Operating/storage temperature 0 to +60°C/-20 to +70°C Maximum storage humidity 90% RH (without condensation) IP20 Approvals VDE

Product Detail

New items

01245.0-00, STEGO

Stego AC Electronic Hygrostats, EFR 012 Series These sense the relative humidity in an enclosure with electric/electronic components and turn on a heater at the set point, helping prevent the formation of condensation in the enclosure. The adjustment knob contains an LED which indicates when the connected heater is in operation. Adjustable and pre-set relative humidity Optical operating display (LED) High switching capacity Clip for 35mm DIN rail, EN 50022 Temperature compensated Small size 64.5 x 42 x 38 mm Plastic casing according to UL94 V-0, light grey Maximum switching capacity (relay output): 250Vac, 8(1.6)A; 120Vac 8(1.6)A; 24Vdc 4A Service life >50,000 cycles EMC according to EN 55014-1-2, EN 61000-3-2, EN 61000-3-3 Connection 5-pole terminal , clamping torque 0.5Nm max: rigid wire 2.5mm 2 ; stranded wire (with wire end ferrule) 1.5mm 2 Operating/storage temperature 0 to +60°C/-20 to +70°C Maximum storage humidity 90% RH (without condensation) IP20 Approvals VDE

Product Detail

New items

8MR2170-1C, Siemens

The Siemens mechanical hygrostat 35 to 95% RF belongs to SIVACON series. The product comes with protection class IP 20. Protection class IP- IP 20 operational current at AC - 5A Mounting position- Vertical

Product Detail

New Items

FLZ610 17218100000, Pfannenberg

01230.0-00, STEGO

01231.0-01, STEGO

01245.9-00, STEGO

NSYCCOHY230VID, Schneider Electric

01245.2-00, STEGO

01246.0-00, STEGO

01245.0-00, STEGO

8MR2170-1C, Siemens

FAQs