Hinge Switches

New items

TVS 400-12/B-M20, Schmersal

TESZ Hinge Safety Switch Thermoplastic enclosure Double-insulated Good resistance to oil and petroleum spirit 111.5 x 92 x 36 mm 2 cable entries M 20 x 1.5 Simple fitting, especially on 40 mm profiles Approvals BG, cULus, EAC, CCC. Standards EN ISO 13849-1, IEC/EN 60947-5-1, BG-GS-ET-15. Hinge Switch

Product Detail

New items

440H-S34010, Allen Bradley Guardmaster

Sprite 3 A miniature hinge operated safety interlock switch with 2 sets of contacts and a full IP67 ingress rating. Particularly useful for light duty hinged guard doors, covers or flaps. Cam may be adjusted in-situ to assist in accurate installation and minimise nuisance tripping Miniature case (75mm x 25mm) Rotateable head facilitates; 4 possible shaft positions Adjustable operating speed Make-before-break contacts Forced guided contacts - complies with EN 1088, IEC 947-5-1 Note These are not to be used for load bearing applications Hinge Switch

Product Detail

New items

T4C 236-11Z, Schmersal

T.C 236, Hinge Slider These switches are designed for hinged guards and have a built-in actuator lever which operates the contact block with a positive mechanical linkage N/C safety contact positively disconnected after just 4.5° rotation Head can be turned in any one of four 90° positions Slow action contact system The housing with snap-on cover fastened without screws to facilitate easy connection Note It is important to select the correct lever model dependent upon the position of the hinge on the guard Standards IEC947-5-1/EN60947-5-1/DIN VDE 0660 Part 200; BG-GS-ET-15; DIN EN 50047; BS5304 Hinge Switch

Product Detail

New items

I88-U1Z VKWRE, Bernstein AG

I88 VKS/VKW - safety switch, plastic Insulation encapsulated Pivot lever actuation For mounting on hinge axes For monitoring rotatable and pivotable safety equipment Switch casing in accordance with EN 50047 Protection rating IP 65 Voltage max.: 500 VAC Continuous current max.: 10 A Switching frequency max.: 50 / min Mech. service life: 1 x10 6 Ambient temperature: -30 °C → +80 °C Bernstein part no. Contact Basic position 608.6100.093 1 NC / 1 NO Lever vertical 608.6100.094 1 NC / 1 NO Lever right 608.6100.095 1 NC / 1 NO Lever left Approvals UL, CSA and BG Hinge Switch

Product Detail

New items

440H-E22027, Allen Bradley Guardmaster

Allen-Bradley Ensign 3 Hinge Switch A compact hinge operated safety interlock switch with the option of 2 safety contacts Full IP67 ingress protection on all models Rotateable head facilities 4 possible shaft positions Only 3° of guard movement required to operate 2N/C, 1N/O or 3N/C controls hollow shaft Forced guided contacts - complies with EN 1088, IEC 947-5-1 Note These are not to be used for load bearing applications Hinge Switch

Product Detail

New items

TVS 410SK-11/11U, Schmersal

TVS 410, Metal 180° opening angle, with adjustable switching angle (K410 tool included with switch) Positive break angle of between 5° to 8° Matching (non-safety) hinge available Metal enclosure (IP65) oil and petroleum resistant Note Stock nos. 623-3284 and 623-3278 are not supplied with a power lead. Standard hinge sold separately see stock no. 623-3290 Standards IEC/EN60947-5-1, BG-GS-ET-15 Hinge Switch

Product Detail

New items

440H-S34019, Allen Bradley Guardmaster

Sprite 3 A miniature hinge operated safety interlock switch with 2 sets of contacts and a full IP67 ingress rating. Particularly useful for light duty hinged guard doors, covers or flaps. Cam may be adjusted in-situ to assist in accurate installation and minimise nuisance tripping Miniature case (75mm x 25mm) Rotateable head facilitates; 4 possible shaft positions Adjustable operating speed Make-before-break contacts Forced guided contacts - complies with EN 1088, IEC 947-5-1 Note These are not to be used for load bearing applications Hinge Switch

Product Detail

New items

XCSPR752, Telemecanique Sensors

XCSPR Safety Hinge Switch Introducing the XCS PL series. Ideal for light industrial machines fitted with hinged or rotary protective covers with small opening radius e.g. double gate guards 2 outputs 5° displaced tripping angle 4 position turret head Ingress protection; IP67 Slow break safety contacts with positive opening operations (positive actuation) N/C contacts open when spindle displaced more than 5° 1 x cable entry tapped for 11mm cable gland, ISO M16 x 1.5 or NPT Hinge Switch

Product Detail

New items

XCSTR752, Telemecanique Sensors

XCS TR, Hinge Ideal for light industrial machines fitted with hinged or rotary protective covers with small opening radius e.g. double gate guards 3 outputs 5° displaced tripping angle 4 position turret head Ingress protection; IP67 Slow break safety contacts with positive opening operations (positive actuation) N/C contacts open when spindle displaced more than 5° 2 x cable entries tapped for 11mm cable gland, ISO M16 x 1.5 or NPT Height (mm) Width (mm) Depth (mm) Contact Rating Operating Temperature (°C) 117 52 30 240Vac (AC-15) 3A; 250Vdc (DC-13) 0.27 A -25 to +70 Hinge Switch

Product Detail

New items

6019390022 SHS3-U15Z-KA 5 R, Bernstein AG

Bernstein AG Safety Hinge Switch The Bernstein AG SHS series safety hinge switch has 2NC/1NO state configuration. This load-bearing hinge is made from stainless steel or die-cast zinc while the switching system is housed in a high-quality plastic enclosure. It has a contact current rating of a 3A at voltage rating of 230VAC and 24VDC. Accessories Empty hinge Change kit comprising: - 2 spare stoppers - 1 special bit - 1 plastic disc - 1 operating and installation instruction Cable coupler - Shake-proof M12 x 1 plug - Injection-moulded cable Features and Benefits Type of connection and direction is axial cable Flexibility and safety for hinged protective equipment Freely and repeatedly adjustable switching point Switching point freely adjustable by user over a range of 270° Uncomplicated re-adjustment even of set switching point by ±1.5° because of an integrated fine adjustment system Slots for mounting on sections and welded structures Right and left hinged systems possible for optimum cable routing Mounting between sections while maintaining the required finger guard gap Applications Packing machines Printing and paper machines Tool machines Metal industry Electrical industry Special machine construction Measurement technology, process engineering, testing and laboratory equipment Plastics processing machinery Enclosures/profile systems Food processing machinery Certifications CSA certified IP67 rated IP 69K rated

Product Detail

New items

440H-S34012, Allen Bradley Guardmaster

Sprite 3 A miniature hinge operated safety interlock switch with 2 sets of contacts and a full IP67 ingress rating. Particularly useful for light duty hinged guard doors, covers or flaps. Cam may be adjusted in-situ to assist in accurate installation and minimise nuisance tripping Miniature case (75mm x 25mm) Rotateable head facilitates; 4 possible shaft positions Adjustable operating speed Make-before-break contacts Forced guided contacts - complies with EN 1088, IEC 947-5-1 Note These are not to be used for load bearing applications Hinge Switch

Product Detail

New items

3SE2283-0GA43, Siemens

3SE2 283 Series Simple, compact, IP65 door hinge safety switch Additional non-safety hinge available as an accessory Switching angle between 4°C and 13° Separate hinge available, stock no. 528-0778 Hinge Switch

Product Detail

New Items

TVS 400-12/B-M20, Schmersal

440H-S34010, Allen Bradley Guardmaster

T4C 236-11Z, Schmersal

I88-U1Z VKWRE, Bernstein AG

440H-E22027, Allen Bradley Guardmaster

TVS 410SK-11/11U, Schmersal

440H-S34019, Allen Bradley Guardmaster

XCSPR752, Telemecanique Sensors

XCSTR752, Telemecanique Sensors

6019390022 SHS3-U15Z-KA 5 R, Bernstein AG

440H-S34012, Allen Bradley Guardmaster

3SE2283-0GA43, Siemens

FAQs