Buy Machine Guarding Accessories Online With Next-Day Delivery At Enrgtech

Types of machines guarding accessories:

As the types of equipment being secured might vary greatly, machine guarding and accessories span a wide range. However, some common categories of accessories are given below:

locks and keys (for extra security)

labelling accessories

guards (with a range of sizes and shapes)

installation accessories for assisting the guards in setting up.

Typical Uses of machine guarding accessories:

The primary purpose of machine guarding is to protect the operator and others in the work area from hazards that may arise during machine operation. These include the risk of problems such as pinch points, cornering points, reciprocating, traversing, and splinters and sparks.

Some guards also provide safety to workers from shavings and flying shards of metal produced by working machines.

The machine guarding helps prevent cuts, lacerations, bumps, and abrasions. Without this protection, injuries can result in severe illness or death.

Note: Even if you think you can work faster without a guard on a machine, there is no good reason to remove it from your machine. The guards are there to protect you!

New Items

New items

106872 | LS-XB-ZB, Eaton

Actuator, form XB

Product Detail

New items

106833 LS-XG-ZBZ, Eaton

Actuator, flat

Product Detail

New items

106831 LS-XFG-ZBZ, Eaton

Actuator, flat, flexible

Product Detail

New items

106839 LS-XW-ZBZ, Eaton

Eaton Interlock Key The Eaton actuator can be used with LS-Titan Solenoid Safety Limit Switches. Its Safety key for use with solenoid interlock switch for monitoring position of protective guards. It is short actuator for attachment to swinging doors at least 350mm in width. Features and Benefits Angled actuator Short key Shock resistant Certifications IEC/EN 60947

Product Detail

New items

106838 LS-XWA-ZBZ, Eaton

Eaton actuator The Eaton actuator can be used with LS-Titan Solenoid Safety Limit Switches. Its Safety key for use with solenoid interlock switch for monitoring position of protective guards. It is long actuator for attachment to swinging doors at least 250mm in width. Features and Benefits Angled actuator Long key Shock resistant Certifications UL Listed CSA Certified IEC/EN 60947-5 UL 508 CSA-C22.2 No. 14 CE marking

Product Detail

New items

106838 | LS-XWA-ZBZ, Eaton

Product Detail

New items

LS-XFG-ZBZ, Eaton

Product Detail

New items

106833 | LS-XG-ZBZ, Eaton

Actuator, flat

Product Detail

New items

XY2CZ403, Schneider Electric

The Schneider Electric Acti 9 OF electrical auxiliary is an open/close contact. It is dedicated to iD, C60, C120, DPN, DPN Vigi, C60H-DC, SW60-DC, C60PV-DC, C60NA-DC, C120NA-DC. This device includes an open/close contact OF to indicate the position of the circuit breaker. Emergency stoppage by normally open pushbutton. It provides a remote indication of the position of the associated device There is a test function on the toggle The operating frequency is 50Hz or 60Hz

Product Detail

New items

106872 LS-XB-ZB, Eaton

Actuator, form XB

Product Detail

New items

F39-TGR-ST-ADJ, Omron

Product Detail

New items

EX-KLE-M16x1.5, Schmersal

AZ16, ATEX Long life - up to 1 million mechanical operations Double insulated 3 cable entries M16 x 1.5 Large wiring compartment High level of contact reliability with low voltages and currents Patented roller system - not sensitive to dirty conditions Slotted holes for adjustment, circular holes for location Note Actuator not supplied and must be ordered separately Standards IEC 60947-5-1, IEC 61241-1, BG-GS-ET-15 Interlock Switch

Product Detail

Machine Guarding Accessories

Types of machines guarding accessories:

Typical Uses of machine guarding accessories:

New Items

FAQs