Non Contact Safety Switches

New items

103044826, Schmersal

The Schmersal RSS 36-D-R-ST-DU has universal coding with RFID technology and RFID-technology for needs-based protection against tampering with 1 x connector plug M12, 8-pole also has actuation from side with thermoplastic enclosure and two short-circuit proof PNP safety outputs. Misaligned actuation possible 27 mm x 108.2 mm x 35 mm High repeat accuracy of the switching points Integral cross-short, wire-breakage and external voltage monitoring of the safety cables up to the control cabinet Degree of protection IP65, IP67, IP69

Product Detail

New items

AZM400-B1, Schmersal

Product Detail

New items

440N-S32021, Allen Bradley Guardmaster

Allen-Bradley Sipha S2 Non-contact Safety Switch The Sipha S2 is a non-contact switch in a slim ABS housing with moulded-in brackets, making it extremely versatile and simple to install. It incorporates several magnetically sensitive elements, which must be triggered in a particular sequence to operate correctly. It is designed to operate with its own actuator to help prevent the switch being defeated by a simple magnet. The Sipha S1 must be connected to the Sipha control unit to provide a monitored circuit. Coding meets the requirements of more complex applications where simple magnetically actuated switching may not be sufficient Head & actuator are IP67 rated, which is ideal for steam cleaning or high pressure hosing down Non-contact actuation Magnetic coded sensing Slim moulded ABS housing, 82x19x19mm Must be operated with its own safety control unit Approvals UL, CSA. Standards EN1088, EN292, EN60204-1. Supplied with Stock nos. 334-0777 & 335-5763 have a 3m cable attached, stock no. 873-2219 has a 10m cable attached.

Product Detail

New items

RE11-SAC, Sick

SICK Magnetic Safety Switches The RE1 and RE2 series from SICK are compact non-contact safety switches with a long service life thanks to the durable and low maintenance design. Just one of these safety switches, in conjunction with a suitable safety module, makes it possible to solve applications up to PL e and Cat. 4 (EN ISO 13849). These magnetic switches are easy to clean, making them suitable for contaminated areas or environments with strict hygiene standards. Flexi Loop now enables a safe series connection with enhanced diagnostics capabilities and minimal wiring effort. Up to performance level PL e / Cat. 4 (EN ISO 13849) Sensors with plug connector or connected cable Flexi Loop-compatible M12 plug connector High tolerances for door misalignment Glass-fiber reinforced PPS rectangular housing Both RE1 & RE2 are supplied with a switch and actuator offering significant cost saving Spare actuators are also available separately RE1 Response range of up to 7 mm 1 NO/1 NC or 2 NO contacts RE2 1 NO/1 NC, 2 NO contacts or 3 NO contacts Fast diagnostics via LED status indicator (RE27) Note The actuators are only coded in the sense that they have an identical magnetic combination making them type specific not individual example specific.

Product Detail

New items

440N-S32033, Allen Bradley Guardmaster

Allen-Bradley Sipha S2 Non-contact Safety Switch The Sipha S2 is a non-contact switch in a slim ABS housing with moulded-in brackets, making it extremely versatile and simple to install. It incorporates several magnetically sensitive elements, which must be triggered in a particular sequence to operate correctly. It is designed to operate with its own actuator to help prevent the switch being defeated by a simple magnet. The Sipha S1 must be connected to the Sipha control unit to provide a monitored circuit. Coding meets the requirements of more complex applications where simple magnetically actuated switching may not be sufficient Head & actuator are IP67 rated, which is ideal for steam cleaning or high pressure hosing down Non-contact actuation Magnetic coded sensing Slim moulded ABS housing, 82x19x19mm Must be operated with its own safety control unit Approvals UL, CSA. Standards EN1088, EN292, EN60204-1. Supplied with Stock nos. 334-0777 & 335-5763 have a 3m cable attached, stock no. 873-2219 has a 10m cable attached.

Product Detail

New items

139015, IDEM

IDEM HYGIEMAG SMR Non Contact Safety Switches The HYGIEMAG SMR safety switch has been developed for non-contact guard door interlocking of hinged, sliding or removable guard doors. It is ideal for applications that require a wide tolerance to misalignment, a high switching capacity or high levels of hygiene. When used with dual channel safety relays, the SMR safety switch can be used to provide up to PLe/Category 4 to ISO13849-1 protection. Features and Benefits Magnetic high-power switching Dual channel safety outputs Stainless steel 316 housing High temperature stability up to 105°C Can be mounted on steel structures High tolerance to guard misalignment IP69K protection Resistant to high temperature hosing and detergent wash down Conformance to EN60947-5-3 PDF-S Up to PLe ISO 13849-1 Universal fitting suitable for most general industry applications Suitable for food splash zones - EHEDG Guidelines Mirror Polished Finish to Ra4 Suitable for CIP and SIP cleaning 2NC / 1 NO 12 mm wide sensing Switching capacity 1 A 22 mm fixing centres Housing: 25.5 x 50 x 13 mm Applications The HYGIEMAG SMR non-contact safety switch is ideal for the food processing, pharmaceutical, packaging and chemical industries. Note The normally closed (NC) circuits are closed when the guard is closed and the actuator is present. Approvals CE, cULus, TUV. Standards EN1088 (ISO 14119), EN 60947-5-1, EN 60204-1, ISO 13849-1, EN 62061, UL 508. Supplied with Actuator.

Product Detail

New items

139016, IDEM

IDEM HYGIEMAG SMR Non Contact Safety Switches The HYGIEMAG SMR safety switch has been developed for non-contact guard door interlocking of hinged, sliding or removable guard doors. It is ideal for applications that require a wide tolerance to misalignment, a high switching capacity or high levels of hygiene. When used with dual channel safety relays, the SMR safety switch can be used to provide up to PLe/Category 4 to ISO13849-1 protection. Features and Benefits Magnetic high-power switching Dual channel safety outputs Stainless steel 316 housing High temperature stability up to 105°C Can be mounted on steel structures High tolerance to guard misalignment IP69K protection Resistant to high temperature hosing and detergent wash down Conformance to EN60947-5-3 PDF-S Up to PLe ISO 13849-1 Universal fitting suitable for most general industry applications Suitable for food splash zones - EHEDG Guidelines Mirror Polished Finish to Ra4 Suitable for CIP and SIP cleaning 2NC / 1 NO 12 mm wide sensing Switching capacity 1 A 22 mm fixing centres Housing: 25.5 x 50 x 13 mm Applications The HYGIEMAG SMR non-contact safety switch is ideal for the food processing, pharmaceutical, packaging and chemical industries. Note The normally closed (NC) circuits are closed when the guard is closed and the actuator is present. Approvals CE, cULus, TUV. Standards EN1088 (ISO 14119), EN 60947-5-1, EN 60204-1, ISO 13849-1, EN 62061, UL 508. Supplied with Actuator.

Product Detail

New items

2702972, Eaton Fulleon

Proximity safety circuit, unicode sensor with RFID coding, model 4, automatic or manual start, integrated diagnostics, 24 V DC supply, M12 connector. The PSR-CT safety circuit consists of a combination of a PSR-CT-...-SEN-1-8 sensor with varying coding types and a coded PSR-CT-C-ACT actuator. It provides maximum tamper protection and the highest level of safety. The PSR-CT safety circuit is available with the following types of coding: Fixcode: For the sensor to detect the actuator, the actuator must first be associated with the sensor via a learning process. The learning process can only be completed once. The sensor and actuator are then permanently assigned to each other by their coding. Safety circuits with fixcode evaluation achieve a high coding level. Unicode: For the sensor to detect the actuator, the actuator must first be assigned to the sensor via a learning process. The learning process for a new actuator can be repeated any number of times. The sensor only detects the last learned actuator. Safety circuits with unicode evaluation achieve a high coding level. Multicode: The sensor detects every actuator of the approved type. No specific actuator code can be assigned. Safety circuits with multicode evaluation achieve a low coding level.

Product Detail

New items

542011, Pilz

PSENcode Slim Non-Contact Safety Switch, Coded The PSEN cs5.11 and PSEN cs5.1p safety switches are coded and only switch when used with an actuator from the PSEN cs1.1 series. There is no restriction on the number of times the actuator can be used and reset. Features and Benefits Transponder technology for presence detection Coded switch Dual-channel operation 2 safety inputs for series connection of multiple safety switches 2 safety outputs Safety Device Diagnostics (SDD) Safety Device Diagnostics can be used to poll sensor information, to perform actions and to read configuration parameters Diagnostic input for Y1 for Safety Device Diagnostics (SDD) Signal output/diagnostic output Y32 for Safety Device Diagnostics LED display for state of actuator detection, state of the inputs and supply voltage/fault IP66 / IP67 protection PSEN cs5.11 (stock no. 918-6667 ) 1 actuation direction with 3 approach directions: square marking for normal operating distance M12 8 pole male connector 30 N holding force PSEN cs5.1p (stock no. 918-6661 ) 4 actuation directions, each with 3 approach directions: square marking for normal operating distance and triangle marking for short operating distance M8 8 pole male connector Caution The safety level PLe (Cat. 4)/SIL CL 3 is only achieved if the safety outputs use 2-channel processing. Standards EN 60947-5-3; EN 62061 SIL CL 3; EN ISO 13849-1 PLe Cat. 4; EN ISO 14119 Coding level Low, Type4. Approvals CE, TÜV, UL/cUL, FCC, IC, ECOLAB. Supplied with Actuator.

Product Detail

New items

542000, Pilz

PSENcode Slim Non-Contact Safety Switch, Coded The PSEN cs5.11 and PSEN cs5.1p safety switches are coded and only switch when used with an actuator from the PSEN cs1.1 series. There is no restriction on the number of times the actuator can be used and reset. Features and Benefits Transponder technology for presence detection Coded switch Dual-channel operation 2 safety inputs for series connection of multiple safety switches 2 safety outputs Safety Device Diagnostics (SDD) Safety Device Diagnostics can be used to poll sensor information, to perform actions and to read configuration parameters Diagnostic input for Y1 for Safety Device Diagnostics (SDD) Signal output/diagnostic output Y32 for Safety Device Diagnostics LED display for state of actuator detection, state of the inputs and supply voltage/fault IP66 / IP67 protection PSEN cs5.11 (stock no. 918-6667 ) 1 actuation direction with 3 approach directions: square marking for normal operating distance M12 8 pole male connector 30 N holding force PSEN cs5.1p (stock no. 918-6661 ) 4 actuation directions, each with 3 approach directions: square marking for normal operating distance and triangle marking for short operating distance M8 8 pole male connector Caution The safety level PLe (Cat. 4)/SIL CL 3 is only achieved if the safety outputs use 2-channel processing. Standards EN 60947-5-3; EN 62061 SIL CL 3; EN ISO 13849-1 PLe Cat. 4; EN ISO 14119 Coding level Low, Type4. Approvals CE, TÜV, UL/cUL, FCC, IC, ECOLAB. Supplied with Actuator.

Product Detail

New items

541009, Pilz

PSENcode Compact Non-Contact Safety Switch, Coded The PSEN cs3.1 and PSEN cs3.1p safety switches are coded and only switch with an actuator from the PSEN cs3.1 series. There is no restriction on the number of times the actuator can be used and reset. Features and Benefits Transponder technology for presence detection (safety function) Coded switch Dual-channel operation 2 safety inputs for series connection of multiple safety switches 2 safety outputs 1 signal output LED display for state of the actuator, state of the inputs and supply voltage/fault 1 direction of actuation IP69K protection Stock no. 918-6655 has an M12 8 pole male connector Stock no. 918-6664 has an M8 8 pole male connector Caution The safety level PLe (Cat. 4)/SIL CL 3 is only achieved if the safety outputs use 2-channel processing. Standards EN 60947-5-3 with the actuator PSEN cs3.1 PDDB; EN 62061 SIL CL 3; EN ISO 13849-1 PLe Cat. 4; EN ISO 14119 coding level Low, Type4. Approvals CE, cULus Listed, TÜV, BG, CCC. Supplied with Actuator.

Product Detail

New items

440N-A02025, Allen Bradley Guardmaster

Ferrogard 6, 9 & 10 Slim Non Contact Safety Switch The Ferrogard FRS 6, 9 and 10 are magnetically actuated non-contact safety switches which offer reliability and a high tolerance to misalignment. Designed to be installed on a guard door, the action of the magnetic actuator being removed from the switch opens the N.C. safety contacts therefore isolating the control power to the machines primary control element. Moulded in ABS plastic with a slim rectangular housing to accommodate narrow mounting areas and sealed to IP67 (NEMA 6P), these non-contact switches are ideal for wet environments. They have two active sensing faces allowing more flexible mounting options. Slim housings to accomodate narrow mounting areas Two active sensing faces allowing more flexible mounting options Operating distance for safety contacts: make 12mm; break 23mm Operating temperature range: -10°C to +65°C M4 mounting IP67 rating (NEMA 6P) Cat. 1 Device per EN954-1 Dual channel interlocks suitable for Cat. 3 or 4 systems Approvals CE Marked for all applicable directives and cULus. Standards EN954-1, ISO13849-1, IEC/EN60204-1, NFPA79, EN1088, ISO14119, ANSI B11.19, AS4024.1.

Product Detail

New Items

103044826, Schmersal

AZM400-B1, Schmersal

440N-S32021, Allen Bradley Guardmaster

RE11-SAC, Sick

440N-S32033, Allen Bradley Guardmaster

139015, IDEM

139016, IDEM

2702972, Eaton Fulleon

542011, Pilz

542000, Pilz

541009, Pilz

440N-A02025, Allen Bradley Guardmaster

FAQs