Push Button Switches | Control Switches | Isolation Switches, Light Switches

New items

2TLA020001R1000 JSHD2C type E, ABB

Enabling Switch, JSHD Series The JSHD series from ABB Jokab offers the ability to operate machinery safely via a three position control device. Many different versions are available for a wide variety of applicational uses. Key features which have been incorporated within this series from ABB Jokab include a front button (for programme start, low speed, etc), a top button (for programme stop, grip devices, etc),a bottom plate (wide bottom plate for fixing interlocking devices and Eden (non-contact sensor) or narrow bottom plate for more flexible handling), a cable version (straight or spiral cable with connectors or assembled on the device), LED indication and finally the device is designed to work with a safety relay or PLC. Multiple uses in troubleshooting, test running and programming where no other protection is available or feasible Key adavntages of the JSHD4 enabling device include it being ergonomic, adaptable and the device provides LED status information Mechanical life of 1000000 cycles to the middle position The body material consists of Polyamide 6.6 Operating force of approximately 15 N High protection class rating of IP65 Insulation resistance of a minimum of 20 MΩ

Product Detail

New items

HE3B-M2PY, Idec

IDEC HE3B Series Pushbutton Enabling Switch Ideally suited for use as an enabling switch for manual robotic control, the function accomodates a panic situation wherein the operator can release or squeeze for the switch off position. The contact will not close when released from "Off" position 3 to "Off" position 1. Rubber covers are available in a choice of 3 colours, see typically Stock no 8077115 . Multiple contacts for enhanced reliability Snap acting contacts from position 1 to 2 3 position operation Off-On-Off

Product Detail

New items

440J-N21TNPM-NP, Allen Bradley Guardmaster

Enabling Switch, 440J Series Hand-operated grip style enabling device. Underneath the rubber boot, called the trigger switch, the 440J enabling device has two three-position switches. The contacts are closed when the actuator is in the mid-position (partly depressed). The contacts are open when the actuator is in the rest (released) position and in the fully pressed position. When transitioning from fully pressed to released, the contacts remain open. The 440J meets the requirements of IEC 60947-5-8:2006, which was written to describe the performance and design requirements of three-position enabling devices. The model with the normally open contact is typically used as a jog or reset function. The safety system design must only allow the use of the jog or reset function when the trigger switch is in the mid-position. 2 N/C direct-opening action Operating force; Position 2: 15 N approx., Position 3: 50 N max. Direct opening force; 90 N Maximum actuation frequency; 1200 operations per hour Note Base plate included. If operation of the switch contacts is all that is needed use the holding bracket 440J-A00N. Additional accessory brackets can be added to achieve various arrangements. The 440J-A01N right angle bracket accommodates the 440K-A11238 (standard actuator) which is used with the standard Trojan 6 or Trojan T15 and the 440G-A27011 (GD2 actuator) which is used with the GD2 interlocks. With two additional screws, the right angle bracket can be mounted to the 440J enabling switch for horizontal mounting. An actuator can also be mounted for vertical use without the 440J-A01N bracket. Mounting plate 440J-A02N has multiple pre-drilled and tapped holes to facilitate mounting of a single 440K-MT (MT-GD2) or 440K-T (Trojan) interlock. Four additional through-holes at the corners allow mounting of the plate to a flat surface. The 440J-A03N accessory mounts to...

Product Detail

New items

HE9Z-GSH51, Idec

IDEC HE5B Series Pushbutton Enabling Switch Ideally suited for use as an enabling switch for manual robotic control. To assist the operator the "On" position requires only light pressure to maintain the function, a higher force is then required to switch from the "On" position to position 3. The contact will not close when released from "Off" position 3 to "Off" position 1. For a suitable IDEC "Pendant Grip" see stock no 8077086 . Rubber button covers are available in a choice of 3 colours; see typically stock no 8077112 IP65 rated with fitted rubber cover Mounts in 16 mm round hole 3 position operation Off-On-Off Standards IEC60947-5-1, EN60947-5-1, JIS C8201-5-1, UL508, CSA C22.2 No 14 Enabling Switch

Product Detail

New items

A4EG-C000041, Omron

Enabling Switch, A4EG Series The A4EG enabling grip switch when used in conjunction with the G9SX-GS ensures the safety of machine operators during setting and maintenance operations. The operator can start and stop the machine while movements are being performed at reduced speed using the grip switch and in the event of danger, to give an emergency stop instruction. If the enabling switch is released or if the operators grip tightens the machine will be stopped immediately. Ergonomic design Three easily discernable positions Equipped with conduit connector Ingress Protection: IP66 for A4EG-C000041; IP65 for A4EG-BE2R041 and A4EG-BM2B041 Enabling Switch

Product Detail

New items

HE6B-M211, Idec

IDEC HE6B Enabling Switch Ideally suited for use as an enabling switch for manual robotic control, the function accomodates a panic situation wherein the operator can release or squeeze for the switch off position. The contact will not close when released from "Off" position 3 to "Off" position 1. Rubber covers are available in a choice of 3 colours, see typically Stock no 8077146 IP65 rated with fitted rubber cover 3 position operation Off-On-Off Standards IEC60947-5-1, EN60947-5-1, IEC60947-5-8, EN60947-5-8, JIS C8201-5-1, UL508, CSA C22.2 No 14 Enabling Switch

Product Detail

New items

HE1B-M1N, Idec

IDEC HE1B Series Basic Enabling Switch Designed for use as an enabling switch on teach pendants, the function accomodates a panic situation wherein the operator can release or squeeze for the switch off position. The contact will not close when released from "Off" position 3 to "Off" position 1 Positive action contacts to ensure no contact welding 3 position functionality (Off-On-Off ) as required for robotic control Standards IEC60947-5-1, EN60947-5-1, JIS C8201-5-1, UL508, CSA C22.2 No 14 Enabling Switch

Product Detail

New items

2TLA019995R2400 JSHD4-4-AB, ABB Jokab

Enabling Switch, JSHD Series The JSHD series from ABB Jokab offers the ability to operate machinery safely via a three position control device. Many different versions are available for a wide variety of applicational uses. Key features which have been incorporated within this series from ABB Jokab include a front button (for programme start, low speed, etc), a top button (for programme stop, grip devices, etc),a bottom plate (wide bottom plate for fixing interlocking devices and Eden (non-contact sensor) or narrow bottom plate for more flexible handling), a cable version (straight or spiral cable with connectors or assembled on the device), LED indication and finally the device is designed to work with a safety relay or PLC. Multiple uses in troubleshooting, test running and programming where no other protection is available or feasible Key adavntages of the JSHD4 enabling device include it being ergonomic, adaptable and the device provides LED status information Mechanical life of 1000000 cycles to the middle position The body material consists of Polyamide 6.6 Operating force of approximately 15 N High protection class rating of IP65 Insulation resistance of a minimum of 20 MΩ

Product Detail

New items

A4EG-BE2R041, Omron

Enabling Switch, A4EG Series The A4EG enabling grip switch when used in conjunction with the G9SX-GS ensures the safety of machine operators during setting and maintenance operations. The operator can start and stop the machine while movements are being performed at reduced speed using the grip switch and in the event of danger, to give an emergency stop instruction. If the enabling switch is released or if the operators grip tightens the machine will be stopped immediately. Ergonomic design Three easily discernable positions Equipped with conduit connector Ingress Protection: IP66 for A4EG-C000041; IP65 for A4EG-BE2R041 and A4EG-BM2B041 Enabling Switch

Product Detail

New items

HE5B-M2PY, Idec

IDEC HE5B Series Pushbutton Enabling Switch Ideally suited for use as an enabling switch for manual robotic control. To assist the operator the "On" position requires only light pressure to maintain the function, a higher force is then required to switch from the "On" position to position 3. The contact will not close when released from "Off" position 3 to "Off" position 1. For a suitable IDEC "Pendant Grip" see stock no 8077086 . Rubber button covers are available in a choice of 3 colours; see typically stock no 8077112 IP65 rated with fitted rubber cover Mounts in 16 mm round hole 3 position operation Off-On-Off Standards IEC60947-5-1, EN60947-5-1, JIS C8201-5-1, UL508, CSA C22.2 No 14 Enabling Switch

Product Detail

New items

2TLA019995R0200 JSHD4-2-AB, ABB Jokab

Enabling Switch, JSHD Series The JSHD series from ABB Jokab offers the ability to operate machinery safely via a three position control device. Many different versions are available for a wide variety of applicational uses. Key features which have been incorporated within this series from ABB Jokab include a front button (for programme start, low speed, etc), a top button (for programme stop, grip devices, etc),a bottom plate (wide bottom plate for fixing interlocking devices and Eden (non-contact sensor) or narrow bottom plate for more flexible handling), a cable version (straight or spiral cable with connectors or assembled on the device), LED indication and finally the device is designed to work with a safety relay or PLC. Multiple uses in troubleshooting, test running and programming where no other protection is available or feasible Key adavntages of the JSHD4 enabling device include it being ergonomic, adaptable and the device provides LED status information Mechanical life of 1000000 cycles to the middle position The body material consists of Polyamide 6.6 Operating force of approximately 15 N High protection class rating of IP65 Insulation resistance of a minimum of 20 MΩ

Product Detail

New items

HE1B-M1, Idec

IDEC HE1B Series Basic Enabling Switch Designed for use as an enabling switch on teach pendants, the function accomodates a panic situation wherein the operator can release or squeeze for the switch off position. The contact will not close when released from "Off" position 3 to "Off" position 1 Positive action contacts to ensure no contact welding 3 position functionality (Off-On-Off ) as required for robotic control Standards IEC60947-5-1, EN60947-5-1, JIS C8201-5-1, UL508, CSA C22.2 No 14 Enabling Switch

Product Detail

Safety Enabling Switches

New Items

2TLA020001R1000 JSHD2C type E, ABB

HE3B-M2PY, Idec

440J-N21TNPM-NP, Allen Bradley Guardmaster

HE9Z-GSH51, Idec

A4EG-C000041, Omron

HE6B-M211, Idec

HE1B-M1N, Idec

2TLA019995R2400 JSHD4-4-AB, ABB Jokab

A4EG-BE2R041, Omron

HE5B-M2PY, Idec

2TLA019995R0200 JSHD4-2-AB, ABB Jokab

HE1B-M1, Idec

FAQs