Safety Relays At Best Prices | Control Relays And Timers ✅

New items

R1.188.3580.0 - SNO4083KM-A, Wieland

Wieland SNO 4083KM Safety Relay SNO 4083KM Safety Relay Function - after the supply voltage is applied to terminals A1/A2 and the safety inputs are closed, the enabling current paths (NO contacts) are closed and the signal current path (NC contact) is opened automatically or by pressing the reset button (manual monitored start). When the safety inputs are opened/de-energized the enabling current paths (NO contacts) are opened immediately and the signal current path (NC contact) is closed. The SNO 4083KM safety relay requires fewer connection cables, irrespective of whether operation with or without cross monitoring is desired. The two channel control of the SNO 4083KM is carried out by either an NC/NC or an NC/NO combination of the safety sensor. In the case of two channel control of the device, a synchronous time is automatically monitored between the two channels. The SafeStart function is used with a manual start, the reset input is automatically monitored for a rising and falling signal edge. The Monoflop function is integrated into the safety relay and prevents device interlocking under all circumstances. Simple diagnosis is possible thanks to an intelligent display system that shows the user the different operating modes of the safety relay in its different applications. Monitoring of E-Stop, Safety Gate and Light Barrier applications Stop Category 0 according to EN 60204-1 Single channel or two channel control Two-channel control with NC/NC or NC/NO Manual or automatic start Cross monitoring Synchronous time monitoring for two channel control 3 enabling current path / 1 signalling current path Screw terminals, pluggable Up to PL e / Category 4 (EN ISO 13849-1) Up to SIL CL 3 (EN 62061)

Product Detail

New items

2903253, Phoenix Contact

PSR-PIP-24DC/MXF1/4X1/2X2/B

Product Detail

New items

XPSAR311144P, Schneider Electric

XPS AR for Light Curtains and E-stops Provides 7 N/O safety relay outputs plus 2 N/C volt free signalling output 4 solid state output signals, duplicating the signalling of the LED's mounted on the front of the module Monitoring of the start button or automatic starting 24Vdc option incorporated for each supply voltage version Compact 90mm housing Can be used to monitor type 4 safety light curtains with semi-conductor outputs according to EN61496-01 Where the letter 'P' appears at the end of the part number this indicates that the product has removable terminal blocks Approvals BG, UL, CSA Standards IEC 204-1; EN 292; EN 418; EN 60204-1; EN 1088

Product Detail

New items

440R-N23114, Rockwell Automation

Minotaur MSR126R and MSR126T, Single or Dual Channel The MSR126R/T is designed for connection to a single channel safety gate, a single channel e-stop or a light curtain that provides cross fault detection. The MSR126.1R/T is designed for connection to a dual channel safety gate or e-stop, as it performs cross fault detection across the inputs.Stop category 0Cross fault monitoringMonitored manual or automatic resetCat. 4 per EN954-1

Product Detail

New items

2981363, Phoenix Contact

SAFETY RELAY 2PDT 24VAC/DC

Product Detail

New items

XPSAK361144, Schneider Electric

XPS AK for all Devices Provides 3 N/O safety relay outputs plus 1 N/C volt free signalling output 4 solid state output signals, duplicating the signalling of the LED's mounted on the front of the module Monitoring of start button or automatic starting 24Vdc option incorporated for each supply voltage version Compact 45mm housing Can be used to monitor type 4 safety light curtains with semi-conductor outputs according to EN61496-1 Approvals BG, UL, CSA Standards IEC 204-1; EN 292; EN 418; EN 60204-1; EN 1088

Product Detail

New items

LG5933.48 DC24V, Dold

LG5933 - two-hand safety relay Safety relay in accordance with the EC Machines Directive 98/37/EC Inputs for 2 switches Overvoltage and short circuit protection LED status display Overall width of 22.5 mm Applications For use in metalwork press tool controllers Processing machines with dangerous closing movements Standards Complies with EN 574 Approvals CE

Product Detail

New items

G9SA-301 AC100-240, Omron

G9SA, Safety Relays, Expandable The G9SA family offers a line-up of compact and expandable safety relay units. Modules with safe OFF-delay timing are available as well as a two hand controller. Simple multiplication of safety contacts is possible by using the connection on the front. 45mm wide housing, expansion units are 17.5mm wide Both DIN mount and screw mount are possible Safe OFF-delay timer model with 1-15s delay (in 1s steps) Simple expansion connection Certification up to category 4 according to EN954-1 depending on the application Suitable for PNP OSSD outputs of safety sensors, F3SN, F3SH, F3S-B, F3S-TGR, F3SL Approvals UL, CSA Standards EN954-1, EN60204-1, EN574 (-TH301), UL508, CSA C22.2 No. 14

Product Detail

New items

G9SA-321-T075 AC/DC24, Omron

G9SA, Safety Relays, Expandable The G9SA family offers a line-up of compact and expandable safety relay units. Modules with safe OFF-delay timing are available as well as a two hand controller. Simple multiplication of safety contacts is possible by using the connection on the front. 45mm wide housing, expansion units are 17.5mm wide Both DIN mount and screw mount are possible Safe OFF-delay timer model with 1-15s delay (in 1s steps) Simple expansion connection Certification up to category 4 according to EN954-1 depending on the application Suitable for PNP OSSD outputs of safety sensors, F3SN, F3SH, F3S-B, F3S-TGR, F3SL Approvals UL, CSA Standards EN954-1, EN60204-1, EN574 (-TH301), UL508, CSA C22.2 No. 14

Product Detail

New items

LG5924.02/61 AC50/60Hz 230V, Dold

LG5924 - Emergency stop module Emergency stop relay compliant with the EC Directive on machines 98/37/EC 1-channel configuration LED status display Short circuit detection between terminal Y1 and earth Overall width of 22.5 mm Applications Protection of persons and machines Machine emergency stop switches Approvals CE Standards IEC/EN 60204-1, VDE 0113 Part 1 (1998-11)

Product Detail

New items

G9SA-TH301 AC/DC24, Omron

G9SA, Safety Relays, Expandable The G9SA family offers a line-up of compact and expandable safety relay units. Modules with safe OFF-delay timing are available as well as a two hand controller. Simple multiplication of safety contacts is possible by using the connection on the front. 45mm wide housing, expansion units are 17.5mm wide Both DIN mount and screw mount are possible Safe OFF-delay timer model with 1-15s delay (in 1s steps) Simple expansion connection Certification up to category 4 according to EN954-1 depending on the application Suitable for PNP OSSD outputs of safety sensors, F3SN, F3SH, F3S-B, F3S-TGR, F3SL Approvals UL, CSA Standards EN954-1, EN60204-1, EN574 (-TH301), UL508, CSA C22.2 No. 14

Product Detail

New items