Safety Two Hand Control Switches

New items

STBVR81, Banner

Turck Run Bar w/ STB Buttons w/o E-Stops This run bar with STB buttons is designed for reduced hand, wrist and arm stress and requires no physical pressure to operate. This run bar is designed with two STB self-checking touch buttons that have a continuous internal self-checking operation, immunity to ambient light and a heavy excess gain to cut through heavy contamination. No hand, wrist or arm stress associated with mechanical push buttons LED Indicator lights whenever the output relay is activated Emergency Stop Pushbutton

Product Detail

New items

2TLA020007R6000 JSTD25F, ABB

ABB Two-Hand Control Switch The ABB JSTD25 series control switch is a two-hand control unit with two safeballs mounted on the ends of an aluminium profile. The safeballs are protected with shields for an unintended press of the Safeball buttons. The device can be easily mounted with the aid of grooves in the aluminium profile and a quick connection is made to the M12 connector underneath the device to increase the grip and ergonomics. Features and Benefits 2NO/2NC contact configuration Equipped with a 5-pole M12 male connector High mechanical life of 106 cycles Operation force of 2N Actuator travel of 1.3 ±0.6mm Certifications IP65 rated EN 574 EN ISO 13849-1 EN ISO13850 EN 60947-1 EN 60947-5-1 EN 999 IEC 60529 TUV approved CE certified

Product Detail

New items

STBVP6Q5, Banner

Turck Optical Touch Buttons This optical touch button requires no physical pressure to operate and is designed to replace mechanical push buttons as well as capacitive touch switches. The optical touch button activates while a finger is in the touch area of the switch, interrupting the buttons infrared sensing beam. No hand, wrist or arm stress associated with mechanical push buttons LED Indicator lights whenever the output relay is activated Emergency Stop Pushbutton

Product Detail

New items

3SU1803-3NB00-1AE1, Siemens

Product Detail

New items

2TLA020007R3400 JSTD1-E, ABB

Two Hand Control Safeball JSTD1/JSTD25 Series Safeball is a one hand device which can also be used in pair to create a two hand device. They can be mounted on a table or on aluminium profiles available from ABB Safety. In order to increase the grip and ergonomics, the Safeballs can be mounted on a flexible support or similar device. JSTD1 is a single hand control device which can be used in a pair to create a two hand controller JSTD25 is a prepared two hand safety control station which includes two JSTD1's Complies to safety category 4 High protection class rating of IP65 High mechanical life of 10 6 cycles Operation force of 2 N Actuator travel of 1.3 ± 0.6 mm

Product Detail

New items

STBVP6-RB1E02, Banner

Turck Run Bar w/ STB Buttons w/ E-Stops This run bar with STB buttons is designed for reduced hand, wrist and arm stress and requires no physical pressure to operate. This run bar is designed with two STB self-checking touch buttons that have a continuous internal self-checking operation, immunity to ambient light and a heavy excess gain to cut through heavy contamination. The run bar also comes with an emergency stop button. No hand, wrist or arm stress associated with mechanical push buttons LED Indicator lights whenever the output relay is activated Emergency stop button included Emergency Stop Pushbutton

Product Detail

New items

STBVR81Q, Banner

Turck Run Bar w/ STB Buttons w/o E-Stops This run bar with STB buttons is designed for reduced hand, wrist and arm stress and requires no physical pressure to operate. This run bar is designed with two STB self-checking touch buttons that have a continuous internal self-checking operation, immunity to ambient light and a heavy excess gain to cut through heavy contamination. No hand, wrist or arm stress associated with mechanical push buttons LED Indicator lights whenever the output relay is activated Emergency Stop Pushbutton

Product Detail

New items

2TLA020007R3000 JSTD1-A, ABB

ABB One- Hand Control Switch The ABB JSTD1 series single-hand control switch can be used when the operator cannot reach into the hazardous area with a freehand or on less dangerous machines. It can be mounted on a table or on aluminium profiles available from ABB Safety. To achieve the highest safety level forone-hand control this device must be connected to a safety control system (E.g. safety relay or safety PLC). This safeball can be mounted on flexible support or similar devices, in order to increase the grip and ergonomics. Features and Benefits 1NO/1NC contact configuration Cable length is 2m Ergonomic Low activation force Flexible mounting Several grip possibilities Highest safety level (category 4) Two-channel switching in each hand High mechanical life of 106 cycles Operating force is 2N Actuator travel of 1.3 ±0.6mm Certifications IP67 rated EN 574 EN ISO 13849-1 EN ISO13850 EN 60947-1 EN 60947-5-1 EN 999 IEC 60529 TUV certified CE certified CSA certified

Product Detail

New items

2TLA020007R3100 JSTD1-B, ABB

ABB One- Hand Control Switch The ABB JSTD1 series single-hand control switch can be used when the operator cannot reach into the hazardous area with a freehand or on less dangerous machines. It can be mounted on a table or on aluminium profiles available from ABB Safety. To achieve the highest safety level for One-hand control this device must be connected to a safety control system (E.g. safety relay or safety PLC). This safeball can be mounted on flexible support or similar devices, in order to increase the grip and ergonomics. Features and Benefits 1NO/1NC contact configuration Cable length is 0.2m Ergonomic Low activation force Flexible mounting Several grip possibilities Highest safety level (category 4) Two-channel switching in each hand High mechanical life of 106 cycles Operating force is 2N Actuator travel of 1.3 ±0.6mm Certifications IP67 rated EN 574 EN ISO 13849-1 EN ISO13850 EN 60947-1 EN 60947-5-1 EN 999 IEC 60529 TUV certified CE certified CSA certified

Product Detail

New items

STBVP6, Banner

Turck Optical Touch Buttons This optical touch button requires no physical pressure to operate and is designed to replace mechanical push buttons as well as capacitive touch switches. The optical touch button activates while a finger is in the touch area of the switch, interrupting the buttons infrared sensing beam. No hand, wrist or arm stress associated with mechanical push buttons LED Indicator lights whenever the output relay is activated Emergency Stop Pushbutton

Product Detail

New items

STBVP6L, Banner

Turck Optical Touch Buttons This optical touch button requires no physical pressure to operate and is designed to replace mechanical push buttons as well as capacitive touch switches. The optical touch button activates while a finger is in the touch area of the switch, interrupting the buttons infrared sensing beam. No hand, wrist or arm stress associated with mechanical push buttons LED Indicator lights whenever the output relay is activated Emergency Stop Pushbutton

Product Detail

New items

2TLA020007R6900, ABB

The ABB JSTD25K two-hand device with two JSTD1-B safeballs and one emergency stop button smile 10 EK. Each safeball is mounted on a side of a 44x88 extruded aluminium profile designed for two-hand applications. The smile 10 EK emergency stop button is mounted on top. The safeballs and smile are pre-wired to a M12-8 male connector The safeballs have protective flanges

Product Detail

New Items

STBVR81, Banner

2TLA020007R6000 JSTD25F, ABB

STBVP6Q5, Banner

3SU1803-3NB00-1AE1, Siemens

2TLA020007R3400 JSTD1-E, ABB

STBVP6-RB1E02, Banner

STBVR81Q, Banner

2TLA020007R3000 JSTD1-A, ABB

2TLA020007R3100 JSTD1-B, ABB

STBVP6, Banner

STBVP6L, Banner

2TLA020007R6900, ABB

FAQs