Flow Sensor | Flow Meter | Meter Sensor | Water Flow Meter

New items

FM.26 322 229, Parker

Industrial Flow Indicators - Flowline High pressure, variable flow indicators with a graduated flow scale on the outer viewing sleeve and an indicator ring which is magnetically coupled to an internal piston. All utilise the technique of differential pressure across a piston which, as the flow increases, moves the piston against a calibrated spring. Can be installed on any plane. Maximum operating temperature 90°C Calibration Water SG 1.0 at 20°C Scale Reading 10% FS (min) Accuracy ±5% Repeatability ±1% Body Brass to BS2874 Wetted parts Magnet Alcomax, PTFE coated Non-wetted Parts Seal Viton Retainer Gland Brass to BS2874 CZ 121 M plated with electroless nickel Indicator Ring Mild steel plated with electroless nickel

Product Detail

New items

142542BSPP, Gems Sensors

RFI Type Visual Flow Indicator RotorFlow® in its most basic form — a bright orange rotor turning with fluid flow. Simple, direct and reliable. Flow rate is estimated, or confirmed, by viewing the speed of the turning rotor. Either port can be used for incoming flow, and bayonet mounting lens is easily removed for quick cleanout. RFI Type RotorFlow® sensors are easy to see, easy to install and easy to afford. Features and Benefits Bright visual flow confirmation Flow ranges from 0.38 LPM to 227 LPM Removable lens for quick cleanout Available in brass, stainless steel or high performance plastic housings Product Application Information Visual flow confirmation on heat exchangers Plastic injection moulding equipment Dimensions Visual only - Polypropylene H64mm W35mm L123mm (Brass L77mm) Electronic versions - Polypropylene H64mm W61mm L125mm (Brass L77mm)

Product Detail

New items

FSU12LF, Sensata/Cynergy 3

The Cynergy3 FSU series flow switches are designed for use in liquid flow systems at pressures up to 10 bar and temperatures up to 85ºC. The design is based around a moving magnet and a fixed reed switch with a low flow restriction. The switches are designed to be used in liquids only and should not be used in systems with significant amounts of solid particles. 1/2 and 3/4 NPT thread connections 1/2 and 3/4 push fit connections Low flow versions available Maximum operating pressure 10 bar NSF 61 Approved Operating temperature rated to 185°F

Product Detail

New items

FSU12A, Cynergy3

The Cynergy3 FSU series flow switches are designed for use in liquid flow systems at pressures up to 10 bar and temperatures up to 85ºC. The design is based around a moving magnet and a fixed reed switch with a low flow restriction. The switches are designed to be used in liquids only and should not be used in systems with significant amounts of solid particles. 1/2 and 3/4 NPT thread connections 1/2 and 3/4 push fit connections Low flow versions available Maximum operating pressure 10 bar NSF 61 Approved Operating temperature rated to 185°F

Product Detail

New items

FSU12A, Sensata/Cynergy 3

The Cynergy3 FSU series flow switches are designed for use in liquid flow systems at pressures up to 10 bar and temperatures up to 85ºC. The design is based around a moving magnet and a fixed reed switch with a low flow restriction. The switches are designed to be used in liquids only and should not be used in systems with significant amounts of solid particles. 1/2 and 3/4 NPT thread connections 1/2 and 3/4 push fit connections Low flow versions available Maximum operating pressure 10 bar NSF 61 Approved Operating temperature rated to 185°F

Product Detail

New items

SFM3019, Sensirion

The Sensirion solution on providing high volumes of flow meters for medical ventilators in order to support the global pandemic situation due to the Corona virus outbreak. It relies on a modular approach of assembling approved parts with good availability to Sensirion and a high-volume through-put manufacturing. High reliability and long-term stability Industry-proven technology with a track record of more than 15 years Designed for mass production

Product Detail

New items

2540A5L61PI, Key Instruments

High Flow FR5000 Series Indicator Series FR5000 is a standard precision-machined acrylic flow meter for liquids and gases, with direct reading air or water scales. Model FR5000 flowmeters have standard 1"" FNPT PVC fittings. Features and Benefits Durable, 1 piece, clear acrylic construction Large scales are easy-to-read Valve with positive stop stays in place under pressure Rod guided float for stable measurements Fitting, valve and O-Ring options accommodate multiple applications Multiple connection options for easier installation Easy disassembly and assembly for maintenance Product Application Information Air sampling equipment aquaculture Desalinisation equipment Gas analysers Medical systems Photo processing equipment Water treatment and distribution systems Purge

Product Detail

New items

29609, Gems Sensors

FS-550 Series Professional range of FS-550 series flow switches from Gems Sensors. This series of flow switches sense liquid flow in either direction to monitor flow/no-flow conditions. They are supplied in two paddle lengths. As flow increases in a pipe, the paddle of the switch pivots to move out of the liquid path. Therefore producing less than 3 PSIG of pressure drop regardless of pipe size. Altech Flow Sensors & Switches

Product Detail

New items

155480, Gems Sensors

RFI Type Visual Flow Indicator RotorFlow® in its most basic form — a bright orange rotor turning with fluid flow. Simple, direct and reliable. Flow rate is estimated, or confirmed, by viewing the speed of the turning rotor. Either port can be used for incoming flow, and bayonet mounting lens is easily removed for quick cleanout. RFI Type RotorFlow® sensors are easy to see, easy to install and easy to afford. Features and Benefits Bright visual flow confirmation Flow ranges from 0.38 LPM to 227 LPM Removable lens for quick cleanout Available in brass, stainless steel or high performance plastic housings Product Application Information Visual flow confirmation on heat exchangers Plastic injection moulding equipment Dimensions Visual only - Polypropylene H64mm W35mm L123mm (Brass L77mm) Electronic versions - Polypropylene H64mm W61mm L125mm (Brass L77mm)

Product Detail

New items

155421, Gems Sensors

RFO Type Electronic Flow Sensor Gems™ Sensors popularised the RotorFlow® paddle wheel design by combining high visibility rotors with solid-state electronics that are packaged into compact, panel mounting housings. They provide accurate flow rate output with integral visual confirmation and an unprecedented price/performance ratio. Features and Benefits Accurate flow rate indication with integral visual confirmation 4.5 V dc to 24 V dc pulsed output Product Application Information Water purification/Dispensing systems Chemical metering equipment Lasers and welders Water injection systems Semiconductor processing equipment Chillers and heat exchangers Altech Flow Sensors & Switches

Product Detail

New items

EF.7731111291, Parker

Flow Indicator The EASIFLOW is a flow measuring device incorporating an AC-DC switch suitable for controlling valves or pump motors or for activating alarm signals. Features and Benefits Oil and water calibrated Pressures up to 10 bar Flows from 1 L/min to 150 L/min Accuracy ±5% FSD Repeatability ±1% FSD fully adjustable flow rate signalling Plant and equipment protection Technical Specification Operating temperature range +5°C to +60°C Maximum working pressure 10 bar Viscosity 10 to 200 centistrokes Accuracy ±5% Repeatablilty ±1% Connections 1" BSP female thread Construction Materials Body Polyester Viewing glass Borosilicate Seals Nitrile Rubber Cone Acetal Spring Stainless Steel Supplied with 2 x DIN standard sockets complete with plugs

Product Detail

New items

426506, Burkert

8045 Series, Digital Flow Transmitter Solid state flow sensor, no moving parts Displays flow and volume Multi-language, menu driven operation Simulation option provides all output signals for commissioning Teach-in, automatic calibration for specific applications Outputs: 4 to 20mA, calibrated pulse and two relays Display and function keys protected by cover Applications include waste water, surface treatment, laundries, chemical industry, (non-hazardous applications), food industry, swimming pools, some acidic and alkaline solutions Stainless steel fittings available Measuring Range 0.05-10m/s Measuring Error teach in Linearity Repeatability ±0.25% of range Temp Coefficient DN15 +0.2K Display 15 x 60mm, 8 digit LC display, alphanumeric, 15 segments, 9mm large Fluid Conductivity >20uS (micro siemens) Ambient Temperature 0 to 60°C Pressure Class PN 6 Enclosure IP65 (NEMA 4) Sensor Material body PVDF, electrodes stainless steel O-rings FPM standard Housing PC Front Plate Foil polyester Power Supply 12...30Vdc, 3 wire Output Signal 4...20mA Load max. 900 ohm at 30V, max. 500 ohm at 24V, max. 100 ohm at 15V Pulse Current open collector NPN and PNP, 0...30V, 100mA protected Relay Outout 2 relays, freely programmable, 3A 230Vac Note System is suitable for liquid applications having a conductivity of greater than 20uS.

Product Detail

Flow Sensors

New Items

FM.26 322 229, Parker

142542BSPP, Gems Sensors

FSU12LF, Sensata/Cynergy 3

FSU12A, Cynergy3

FSU12A, Sensata/Cynergy 3

SFM3019, Sensirion

2540A5L61PI, Key Instruments

29609, Gems Sensors

155480, Gems Sensors

155421, Gems Sensors

EF.7731111291, Parker

426506, Burkert

FAQs