Heat-Shrink & Cold-Shrink Sleeves

Glenair Heat Shrink Boots, Straight, Lipped Type 1, Series 77 Glenair full nelson heatshrink lipped, series 77 type 1 semi rigid elastomer boots offer excellent solvent, fuel and oil resistance and have superb extreme temperature resilience, rated for 3000 hours at +150 deg C. These heat shrink boots fit most standard boot adaptors for circular connectors. These elastomer heatshrink boots are recommened for applications such as petrochemical exploration and military vehicles. Available with and internal coating of R epoxy adhesive (R part number designation) or adhesive free. Temperature range -75 to +150 °C Excellent resistance to fuels, oils, solvents and heat Approvals VG95343 Type 6, BSG 198-5-DE, EN62329-102, SAE AS5258 Type H Glenair Heat Shrink Boots Full Nelson Series 77 Glenair Series 77 full nelson heat shrink boots provide mechanical and environmental protection to connector - cable transistions. Suitable for many applications including military vehicles, shipboard and petrochemical exploration. These durable heat shrink boots are available in semi rigid elastomer (type 1) and polyolefin ( type 2 smoke and halogen free) material types with or without epoxy R adhesive lining. Shrink Boot Typical Material Properties Property Type 1 High Performance Elastomer Type 2 Zero Halogen Polyolefin Operating Temperature Range -75 to + 150°C -30 to + 125°C Shrink Temperature (min.) 135°C 135°C Tensile Strength (psi) 1700 1100 Elongation (% min.) 400 250 Long Term Heat Aging 3000 hrs, 150°C 3000 hrs, 125°C Heat Shock 4 hrs, 215°C 4 hrs, 175°C Heat Aging 168 hrs, 160°C 168 hrs, 150°C Dielectric Strength (V/mil) 300 380 Volume Resistivity (ohms-cm) 10 13 10 12 Water Absorption (%) 0.5 0.5 Flammability Burn Time less than 15 sec. Burn Length less than 25 mm Burn Tim...

ZH-100 halogen-free heatshrink sleeving RS Range of halogen-free thin wall heatshrink sleeving. Give off very low levels of toxic fumes in contact with flames. Supplied in 1.2 m length dimensions. Material: polyolefin Shrink ratio: 2:1 Shrink temperature: 120 °C Operating temperature: –30 °C → +105 °C Colour: black Approvals   Def. Stan. 59-97, UL 224

RNF100 Heatshrink Tubing 2:1 (1.2m lengths) Flame retardant heat-shrink tubing that provides insulation and strain relief of wire terminations and connections. Used extensively in military applications, for lightweight harness jackets, insulation, colour coding, identification, protection against fluids and to provide mechanical strength. Features and benefits • Excellent all round performance • Shrink ratio 2:1 • Available in a wide range of sizes and colours • Flame retardant • Flexible Approvals UL file E35586, CSA - LR31929. Standards VG 95343 Part 5 type A & B, VDE 0341/pt 9005, Def Stan 59-97 Type 2b, Meets AMS-DTL-23053/5 Class 1 (colours), Class 2 (Clear), BS 3G-198 part 3 11B. Warning Clear heatshrink is NOT flame retardant and NOT UL/CSA approved.