In-Circuit Emulators | In-Circuit Debuggers

New items

8.08.00 J-LINK BASE, SEGGER

J-Link BASE Probe J-Link BASE is a JTAG programming and debug probe supporting a large number of processor cores. J-Link is supported by all major IDEs such as IAR EWARM, Keil MDK, Rowley CrossWorks, Atollic TrueSTUDIO, IAR EWRX, Renesas HEW, Renesas e2studio, and many others. Supported Processors ARM7/9/11, Cortex-A5/A7/A8/A9, Cortex-M0/M1/M3/M4/M7, Cortex-R4/R5 Microchip PIC32 Renesas RX100/RX200/RX610/RX621/RX62N/RX62T/RX630/RX631/RX63N Features Direct download into Flash memory of most microcontrollers supported Download speed up to 1MB/second Supports unlimited breakpoints in Flash memory Supports breakpoints in external Flash memory of Cortex-M systems Supports concurrent access to CPU by multiple applications GDB Server included: allows using J-Link remotely via TCP/IP Supports multiple target interfaces: JTAG, SWD Supports SWV/SWO (Serial Wire Viewer / Serial Wire Output) Wide target voltage range: +1.2V to +3.3V, +5V tolerant Supports JTAG chains with multiple devices Embedded Trace Buffer (ETB) support Various target adapters and optical isolation adapters available Powered via USB connector Support for adaptive clocking All JTAG signals can be monitored, target voltage can be measured Target power supply: 300mA with overload protection Target interface: JTAG 20-pin PC interface: USB 2.0 Dimensions: 100 x 53 x 27mm Cross-platform support (runs on Windows, Linux, Mac OS X) Supported by all major IDEs Software Developer Kit (SDK) available Free software updates, 1 year of support Target Adapters & Adapter Cables 131-1325 J-Link Target Power Supply Adapter 131-1326 J-Link 10-pin Needle Adapter 131-1327 J-Link RX100/200/600 MCU Adapter 131-1328 J-Link 19-pin ARM Cortex-M MCU Adapter 131-1329 J-Link 9-pin ARM Cortex-M MCU Adapter 131-1330 J-Link 14-pin ARM 7/9/11 MCU Adapter 131-1331 J-Lin...

Product Detail

New items

8.20.00 J-Trace PRO Cortex, SEGGER

SEGGER J-Trace Pro Cortex The SEGGER J-Trace pro cortex is a high-speed hardware trace probes for use with Cortex-A/M/R based microcontrollers. The super-speed USB 3.0 interface of J-trace pro cortex allows continuous streaming trace via USB with the full trace clock, lifting the limitations by internal buffers. Features and Benefits: Full J-link debug functionality Isolate and identify hard-to-find code defects with unlimited trace No power supply required (powered through USB) Real-time streaming at a full system clock Satisfy regulatory requirements with instruction-level code coverage Tune your application with live profiling Unlimited flash breakpoints information Applications: Electronics industry Embedded programming Certifications: ANSI/ESD S20.20:2014 BS EN 61340-5-1:2007

Product Detail

New items

5.04.01 Flasher ST7, SEGGER

The SEGGER Flash programmer for ST7 series of flash microcontrollers with on-chip flash. Small, compact housing Easy to use windows program Free updates Serial (in target) programming supported Programming / Verifying / Read back supported OPTION BYTE Programming supported 512 KB internal Flash memory to store target program High speed programming: app 12 sec for 60 KB in serial mode with 16 MHz target clock for programming and verification

Product Detail

New items

ASBK-014, Microchip

The Microchip ASBK-014 Device Programmer Kit is designed for the 2ASC and 62EM1 family of AgileSwitch digital programmable gate drivers. The 2ASC gate drivers feature patented robust short circuit detection and augmented switching. The 62EM1 gate drivers also offer patented augmented Turn-Off (ATOff) and up to 7 unique fault conditions. ASBK-014 kit includes 1 x Microchip PICKIT4 programmer, 1 x AgileSwitch ASB-014 adapter, and 2 x programming cables

Product Detail

New items

DEBUGADPTR1-USB, Silicon Labs

USB DEBUG ADAPTER 8-BIT

Product Detail

New items

240-127, Digilent

The Digilent Digital Discovery is a combined logic analyser and pattern generator instrument that was created to be the ultimate embedded development companion. The Digital Discovery was designed to optimize channels, speed, and portability. The small form factor facilitates easy storage and provides a whole suite of advanced features to allow you to debug, visualize, and simulate digital signals for most embedded projects. 24-channel digital logic analyser 16-channel pattern generator

Product Detail

New items

8.16.28 J-Link ULTRA+, SEGGER

J-Link ULTRA+ Probe J-Link ULTRA+ is a JTAG/SWD programming and debug probe supporting a large number of processor cores. It features seamless integration into the IAR Embedded Workbench IDE and comes with integrated licenses for unlimited breakpoints in Flash memory, RDI / RDDI and J-Flash. Supported Processors ARM7/9/11, Cortex-A5/A8/A9, Cortex-M0/M1/M3/M4/M7, Cortex-R4/R5 Microchip PIC32 Renesas RX100/RX200/RX610/RX621/RX62N/RX62T/RX630/RX631/RX63N Features Direct download into Flash memory of most microcontrollers supported Download speed up to 3MB/sec Supports unlimited breakpoints in Flash memory Supports breakpoints in external Flash memory of Cortex-M systems Supports concurrent access to CPU by multiple applications Remote Server included. Allows using J-Link remotely via TCP/IP Automatic core recognition Supports SWD/SWV (Serial Wire Debug / Serial Wire Viewer) Supports J-Flash Production Flash programming Maximum target interface speed: 50MHz Maximum SWO sampling speed: 100MHz Wide target voltage range: +1.2V to +3.3V, +5V tolerant Embedded Trace Buffer (ETB) support Various target adapters and optical isolation adapters available RDI / RDDI interface Powered via USB connector Support for adaptive clocking All JTAG signals can be monitored, target voltage can be measured Target power supply: 300mA with overload protection Target interface: JTAG/SWD 20-pin PC interface: USB 2.0 HS Dimensions: 100 x 53 x 27mm Cross-platform support (runs on Windows, Linux, Mac OS X) Flash DLL available Software Developer Kit (SDK) available Free software updates, 1 year of support Target Adapters & Adapter Cables 131-1325 J-Link Target Power Supply Adapter 131-1326 J-Link 10-pin Needle Adapter 131-1327 J-Link RX100/200/600 MCU Adapter ...

Product Detail

New items

PG164140, Microchip

The MPLAB® PICkit™ 4 In-Circuit Debugger/Programmer allows fast and easy debugging and programming of PIC® and dsPIC® flash microcontrollers, using the powerful graphical user interface of MPLAB X Integrated Development Environment (IDE), version 4.15. The MPLAB PICkit 4 is connected to the design engineer's computer using a high-speed 2.0 USB interface and can be connected to the target via an 8-pin Single In-Line (SIL) connector. The connector uses two device I/O pins and the reset line to implement in-circuit debugging and In-Circuit Serial Programming™ (ICSP™). An additional micro SD card slot and the ability to be self-powered from the target means you can take your code with you and program on the go.* PICkit 4 supports advanced interfaces such as 4-wire JTAG and Serial Wire Debug with streaming Data Gateway, while being backward compatible for demo boards, headers and target systems using 2-wire JTAG and ICSP. The PICkit 4 also has a unique programmer-to-go function with the addition of a micro SD card slot to hold project code and the ability to be powered by the target board.* The MPLAB PICkit 4 In-Circuit Debugger/Programmer supports many, but not all, PIC MCUs and dsPIC DSCs at this time. The firmware is continually being upgraded to add support for new devices. To request priority device support or to report issues, email: PICkit4_Update@microchip.com Features and Benefits Matches silicon clocking speed - Programs as fast as the device will allow Target voltage of 1.20V to 5.5V - Wide target voltage supports a variety of devices Can supply up to 50mA of power to the target - Can be powered from the target to program in the field* Minimal current consumption at Portable USB-powered and RoHS-compliant 8-pin single in-line header - Supports advanced interfaces such as 4-wire JTAG and Serial Wire Debug with streaming Data Gateway Backward compatible for demo boards, headers and target systems u...

Product Detail

New items

CY8CKIT-002, Infineon

PSoC® MiniProg3 Program and Debug Kit Cypress Semiconductor CY8CKIT-002 PSoC® MiniProg3 Program and Debug Kit is a low-cost aid to help developers who want to build their own systems around Cypress 8- and 32-bit PSoC devices. The kit is a programmer for PSoC 1, PSoC 3, PSoC 4 and PSoC 5LP architectures and a debug tool for PSoC 3, PSoC 4 and PSoC 5LP architectures. MiniProg3 provides the flexibility to work with different programming and debugging interfaces, such as JTAG, SWD, ISSP and I²C. When programming, MiniProg3 enables communication with target devices using I/O voltage levels from 1.5V to 5.5V. In addition, MiniProg3 can supply power to a simple target board at one of four voltage levels: 1.8V, 2.5V, 3.3V, or 5V. Kit Contents - MiniProg3 programmer/debugger - 10-pin ribbon cable - USB Standard-A to Mini-B cable - Quick Start Guide Applications - Embedded Design & Development

Product Detail

New items

5.17.01 Flasher PRO, SEGGER

The SEGGER Flasher PRO is a programming tool for Microcontroller with on-chip or external Flash memory. Stand-alone JTAG/SWD programmer (Once set up, Flasher can be controlled without the use of PC program) Ethernet interface Supports internal and external flash devices Wide range of devices are supported Free firmware updates 128 MB internal NAND flash, used for storing configuration and data files Serial in target programming supported

Product Detail

New items

UMFTPD3A, FTDI Chip

The FTDI Chip Universal Programmer Module is used to provide an external programming voltage that covers 1.5 to 6.5V to program FTDI development modules and ICs with internal OTP memory or electrical poly-fuse. USB 2.0 full speed compatible Visual indicator for VPP programming voltage using LEDs Visual indicator for VPP USB bus power using LEDs

Product Detail

New items

HW-USBN-2B, Lattice Semiconductor

HW-USBN-2B FPGA Programming Cable, Lattice Semiconductor The HW-USBN-2B FPGA programming cable provides an enhanced iCE programming support via USB port connection. It uses fly-wire connectors to the target system board for maximum flexibility. The cables also include adapters for easy interface to widely used 1 x 8 and 2 x 5 header configurations. 1.2 V to 3.3 V compatible 3x-10x I 2 C support Programmable Logic Programming

Product Detail

Debuggers & In-Circuit Emulators

New Items

8.08.00 J-LINK BASE, SEGGER

8.20.00 J-Trace PRO Cortex, SEGGER

5.04.01 Flasher ST7, SEGGER

ASBK-014, Microchip

DEBUGADPTR1-USB, Silicon Labs

240-127, Digilent

8.16.28 J-Link ULTRA+, SEGGER

PG164140, Microchip

CY8CKIT-002, Infineon

5.17.01 Flasher PRO, SEGGER

UMFTPD3A, FTDI Chip

HW-USBN-2B, Lattice Semiconductor

FAQs