Circular Connector Dust Caps

Types of Circular Connect Dust Caps:

Port dust caps: threaded into connector Adapters to offer protection from environmental factors, including bad weather.

TPE: TPE (thermoplastic elastomer) is a versatile material that is strong, long-lasting, and suitable for both harsh and soft situations.

Fiber dust caps: Fiber dust caps incorporate a cord called fiber. These fiber cords are typically used to protect the cap and the connector to ensure a reliable, durable, and scalable connection across the system.

Connector dust caps with chains: Dust caps with chains can be utilized in more challenging conditions because of the cord's plating.

IP Ratings:

The grade supported by the IEC 60529 standard, known as an IP (ingress protection) rating, indicates how waterproof and dust-proof a component is. Two letters (IP) and two digits (n) make up IP ratings.

As may be seen below, the numbers represent various levels of protection. The item's protection against solids is shown by the first number, while its protection against liquids is indicated by the second number.

IP69 & IP69K - Fully dust-tight and capable of submersion for extended periods of time in 1 m or deeper. Streams and hot pressures can be handled by IP69K.

IP66 - Completely dust light having the potential to manage great water jets up close.

IP68 – Dust-tight is possible to submerge up to 1m+.

IP67 - A complete dust-oriented light has the potential to be encountered underneath by up to 1m.

New Items

New items

08-2840-000-000, Binder

Accessories series 768 / 718 From Binder, individual components that are compatible with M8 and M12 connectors.

Product Detail

New items

N/MS25042-24D, JAE

Product Detail

New items

QC39, Deutsch

QC Pro Caps Sealed pro cap with lanyard to suit the Deutsch Quick Connect (QC) range of connectors,Integral panel sealing ring Approvals IP68 QC Pro Caps

Product Detail

New items

TT118DCR, Toughcon

Sealing Caps The use of protective caps is advisable particularly for applications where disconnected Toughcon connector or receptacle could come into contact with humidity or dust. The protective cap can either be screwed into place on the receptacle attached to the cable using a cable Binder. This means that the protective cap cannot be lost. All models are highly reliable and excellent quality. Features & Benefits Material PPO Temperature range -20°C to +105°C Toughcon Circular Connectors (Plastic) Toughcon circular connectors are used in many industrial applications. With a range of matching plugs, receptacles and accessories, the Toughcon system is suitable for flexible configuration and can be used for a wide range of requirements within an application. The Toughcon TT series is made of sturdy and light plastic.The contact holder is the shell at the same time, and is made of resistant, glass-fibre reinforced, temperature stable plastic.,For a comprehensive cross reference of component parts please see the selection table on our website

Product Detail

New items

62GB-1070-18(416), Amphenol

Dust Cap for Chassis Connectors (Nickel Plating) Dust caps suitable for chassis mounted connectors in the UK Pattern 105 and MIL-C-26482 ranges. A silicone rubber gasket provides sealing to a chassis receptacle. A nylon retention cord is fitted. Amphenol - 62GB (nickel plating) High quality bayonet locking connectors that have been designed to meet the requirements of BS9522 FOO17, Def Stan 59-35 and MIL-C-26482E. The connector shells are machined from aluminium alloy bar to ensure high strength. An electro less nickel plating provides a resilient, durable and long lasting finish which meets the requirements of the EC Directive for cadmium free products. These solder termination connectors are all provided with normal orientation of the inserts and are suited to applications where robust high quality connectors are demanded. This range offers standard signal pin and power pin type planforms

Product Detail

New items

HR41-25WBR-C, Hirose

HR41 Series Waterproof Outdoor Connectors From Hirose, the HR41 series are a selection of lightweight plastic waterproof connectors that are suitable for outdoor use. Rated to IP68, the connector is guaranteed to ensure a waterproof seal when mated. The HR41 connector series features a bayonet-locking system and tactile plug alignment indicator, and is offered in jack, plug, and receptacle variants. The three-step sequence structure of pin location designed for 5-pin plugs protects the system in case of hot swapping. Features and Benefits IP68 weather-resistant waterproof connector for outdoor use Bayonet lock and tactile plug alignment indicator Current rating is 20 A for 3-pin configuration, 10 A for 5-pin (20 A if using 4 pins and 1 ground) Rated voltage is 600 V ac, 400 V dc for the 3-pin configuration and 600 V ac, 400 V dc for the 5-pin Anti-loosening mechanical structure for clamp tightening Applications HR41 series connectors are suitable for many applications, including LED lighting, BTS, ETC systems, and lighting in harsh environments. Note For crimp contacts see 875-2850 and range.

Product Detail

New items

734-209-100, Hirschmann

ASI socket cover and M12 plug M12 plugs ensure that unused inputs / outputs are sealed. ASI interface for multipoint connectors. ASI is a bus for On-off sensors/actuators, which enable the complex wiring of an installation to be replaced by an unscreened 2-wire cable system with quick connection and without interruption. This concept can be used in any configuration, and the cable transfers the transmitted information between the master and the slaves of the bus and their power supplies. The bus is mainly comprised of: - 31 slaves maximum; 5 ms max. to process information - 100 metres of cable, developed with all derivatives merged - possibility to connect 124 inputs and/or 124 outputs per master - permanent diagnostic ensured by consistency checking between the expected slaves and the slaves which are actually detected on the bus. Field of application: the ASI interface offers great flexibility, especially with modular machines - adding a functional module does not call the initial investment in to question.

Product Detail

New items

PCPD-5, ITT Cannon

Panel Drain Connectors 660A ITT VEAM PowerLock panel drain connectors are field installable power distribution connectors which serve a broad industry base including generator distribution connectors at carnivals, outdoor concerts, sporting events and many other heavy industry applications that require a robust and hard wearing power connector.ITT VEAM PowerLock panel drain connectors are single pole connectors that accept line source connectors of the same colour coding as part of the power supply daisy chain. Supplied with female contact. Rigid IP2Xspring loaded finger proof nose O Ring to guarantee IP67 when mated Note Never attempt to uncouple a connector when under load. 400 and 600 amp connectors are interconnectable, which is not advisable in a power network, caution must be applied when building a network to ensure the power handling capabilities of connectors are not exceeded. Approvals IP67, UL94-V0, IP2X Veam Powerlock The Veam Powerlock connector series for field installable power distribution systems which offers the ultimate in safety and reliability under the most severe operating systems.,Typical applications include three phase motors, generators, load banks, lighting distribution panels and in-house supplies.

Product Detail

New items

08-2677-000-000, Binder

Accessories M12 A-coded From Binder, a range of components compatible with M12 connectors.

Product Detail

New items

UTP20DCG, Souriau

CONN RCPT SEALING CAP SIZE 20

Product Detail

New items

08-1079-000-000, Binder

Accessories series 423, 723, 425 Ways 2 3 4 6 7 8 12 24 Current Rating (A) 7 7 6 5 5 5 3 1 Voltage Rating (Vac) 250 250 250 250 250 60 60 60 Max. Wire Gauge (mm²) 0.75 0.25 0.14 Cable Outlet Size 4 - 6mm 6 - 8mm Contact Material, Pin Brass Contact Material, Skt Bronze Contact Plating Silver Gold Contact Resistance ≥5mΩ ≤3mΩ Insulation Resistance ≥10 10 Ω Mating Cycles >500 Operating Temperature -40°C to +85°C Cable Connector Material PA66 Panel Connector Material Nickel plated zinc diecasting Flammability Rating UL94-0 (inserts), UL94 HB (cable connector housing)

Product Detail

New items

08-2615-000-000, Binder

Accessories M12 A-coded From Binder, a range of components compatible with M12 connectors.

Product Detail

Types of Circular Connect Dust Caps:

IP Ratings:

What are the applications of Circular Connector Dust Caps?

New Items

08-2840-000-000, Binder

N/MS25042-24D, JAE

QC39, Deutsch

TT118DCR, Toughcon

62GB-1070-18(416), Amphenol

HR41-25WBR-C, Hirose

734-209-100, Hirschmann

PCPD-5, ITT Cannon

08-2677-000-000, Binder

UTP20DCG, Souriau

08-1079-000-000, Binder

08-2615-000-000, Binder

FAQs