Compact Power Connectors Available With Efficient Delivery Online.

New items

572-002-000-300, EDAC

EDAC IP67 572 Series Wire to Wire Plugs From EDAC, a series of superior quality fully waterproof wire to wire connectors. These IP67 rated plugs have pre-assembled housings featuring an integrated seal providing complete waterproof protection guaranteeing no water ingress. The 572 series of connectors have a 5.8mm pitch and can accommodate a wide range of wire sizes depending on the crimp contacts selected. This range of wire to wire connectors are available in 1, 2 and 3 pole arrangements offering a wide range of connection solutions. Operating temperature across the whole series of -40° to + 105°. A hand crimp tool for the 572 series is available, see part number 111-9356 Features and Benefits Fully waterproof with double latch Internal polarisation preventing miss mating Pre-assembled housings and seals Easy crimp and poke Wire to wire and wire to board options Applications Lighting Industrial Pumps Test equipment Emergency vehicles Construction equipment Welding equipment Automotive Sound and broadcast systems IP67 Edac Range

Product Detail

New items

794821-1, TE Connectivity

TE Connectivity Mini-Universal MATE-N-LOK Sealed Plug Connectors Mini-Universal MATE-N-LOK sealed wire to wire plug style connectors with a splashproof design ideal for use in environments where there is high humidity or intermittent liquid splashing. These Mini-Universal MATE-N-LOK sealed plug connectors are fully polarized, have a positive locking latch enabling accurate and secure mating and mate with all standard Mini-Universal MATE-N-LOK connector housings and pin headers (except Blindmate). Pin and socket contacts can accomodated in the same housing, see stock numbers 720-2234 and 683-1324 . These Mini-Universal MATE-N-LOK sealed plug connectors are for use in conjunction with interface seals which need to be purchased separately, see stock number 500-557 typically. A single housing cavity plug seal is also available, see stock number 500-658 and a single wire seal, see stock number 500-648) Dimensions (mm) Number of Ways A B C 2 5.6 10.8 9.8 3 5.6 15 14 3 9.8 11.8 9.8 4 12.3 12.3 9.8 6 14 11.8 9.8 9 14 16 14 12 16 18.2 14 15 22.4 16 14 20 43 12 9.8 Standards Tested to Sealing Level of IP56 and IP57 per IEC 60529 TE Connectivity Mini-Universal MATE-N-LOK Connector System The Mini-Universal MATE-N-LOK connector system for wire to wire and wire to board connections on a 4.14mm centreline. The connectors have a compact and durable design and can achieve a maximum electrical performance with current ratings of up to 9.5 A max per line. The Mini-Universal MATE-N-LOK connector system consists of plug and cap housings and PCB headers. The plug and cap housings can accept a combination of both pins and sockets in the same housing.

Product Detail

New items

172343-1, TE Connectivity

TE Connectivity Mini-Universal MATE-N-LOK Free Hanging Receptacle Housings Mini-Universal MATE-N-LOK free hanging receptacle style housings with a 4.14mm centreline for use in wire to wire applications. These Mini-Universal MATE-N-LOK receptacle housings have a compact, durable design and are fully polarized with a postitive locking mechanism to ensure accurate and secure mating. Both pin and socket contacts can be accommodated in the same housing The housings are made from either UL94V-0 or UL94V-2 white nylon, please refer to datasheet for details. For contacts see stock numbers 680-5040 typically For mating plug style housings see stock number 483-8556 typically TE Connectivity Mini-Universal MATE-N-LOK Connector System The Mini-Universal MATE-N-LOK connector system for wire to wire and wire to board connections on a 4.14mm centreline. The connectors have a compact and durable design and can achieve a maximum electrical performance with current ratings of up to 9.5 A max per line. The Mini-Universal MATE-N-LOK connector system consists of plug and cap housings and PCB headers. The plug and cap housings can accept a combination of both pins and sockets in the same housing.

Product Detail

New items

20ESRM-3, TE Connectivity

SR Series IEC Power Inlets C-14 A comprehensive range of snap-in and flange mount unfiltered C-14 power inlets with faston terminals, UL94V-0 rated thermoplastic housings, 250V maximum rated voltage.

Product Detail

New items

1-480318-0, TE Connectivity

TE Connectivity Commercial MATE-N-LOK Free Hanging Socket (Plug) Housings Commercial MATE-N-LOK free hanging socket (plug) housings with a 5.08mm centreline that accept crimp socket contacts (see stock number 710-0554 typically). These Commercial MATE-N-LOK free hanging socket (plug) housings are made from UL 94V-2 nylon GF, are fully polarized with built in contact stabilization and have self aligning features and locking devices to ensure the connector halves hold together under conditions of severe shock and vibration. For mating connectors see Commercial MATE-N-LOK PCB vertical (stock number 520-264 typically) and right angle mounting (stock number 520-346 typically) pin headers and Commercial MATE-N-LOK PCB vertical socket headers (stock number 520-258 typically) A keying plug is also available - see stock number 712-2261 Dimensions Number of Circuits Length Width 1 22.1 6.6 2 21.9 7.5 3 21.6 7.4 TE Connectivity Commercial MATE-N-LOK Range The Mate-N-Lok commercial range of connectors from TE Connectivity have a wide range of applications including both crimp and IDC terminations for Wire to Wire and Wire to Board. Special features of the Commercial range of Mate N Lok connectors include: Fully polarized nylon housings Easy cavity identification Low insertion/extraction forces required Built in contact stabilization and self-aligning features Locking devices are integral part of design Connector halves will hold together under severe conditions of vibration and shock

Product Detail

New items

794940-1, TE Connectivity

Socket/Receptacle Housing Suitable for mounting directly to a free cable or panel allowing wire to wire and wire to panel connections Accepts male or female contacts Fully polarised housings Dimensions (mm) Number of Ways A B C 2 5.6 10.8 9.8 3 5.6 15 14 3 9.8 11.8 9.8 4 12.3 12.3 9.8 6 14 11.8 9.8 9 14 16 14 12 16 18.2 14 15 22.4 16 14 20 43 12 9.8 Note Images are a representitive only. TE Connectivity Mini-Universal MATE-N-LOK Connector System The Mini-Universal MATE-N-LOK connector system for wire to wire and wire to board connections on a 4.14mm centreline. The connectors have a compact and durable design and can achieve a maximum electrical performance with current ratings of up to 9.5 A max per line. The Mini-Universal MATE-N-LOK connector system consists of plug and cap housings and PCB headers. The plug and cap housings can accept a combination of both pins and sockets in the same housing.

Product Detail

New items

PX0959/P, Bulgin

8-Way, Non-Reversible, Low Power Polarised Plugs & Sockets 8-Way non-reversible plugs and sockets for low power applications found in lighting, theatre, heating and general industrial applications to enable safe interconnection coupling of equipment at mains voltage. Connector detail: Cable plug stock no. 487-384 has 90° open cable entry Cable socket stock no. 294-9389 has a 90° sleeved cable entry Chassis socket stock no. 487-378 has straight 4.8mm tab connections Chassis socket stock no. 294-9503 has splayed 4.8mm tab connections Chassis plug stock no. 473-1809 has solder spill connections Current rating 6A Voltage rating 250Vac (per pin for stock no.s 487-384 and 487-378 ) Contact resistance 294-9389 and 294-9503 Insulation resistance >10 3 MΩ for stock no.s 487-384 and 487-378 >10 8 MΩ for all others Body material Glass filled nylon ( 487-384 and 487-378 ) Glass filled nylon UL94H-B (for all others) Contact material Brass (Tin/Nickel plated) Operating temp. -20°C to +70°C Max. cable dia. 10mm Warning The following RS power connectors are suitable for direct connection to 240V a.c. mains unless otherwise stated. Care must be taken when choosing a product for mains connection.

Product Detail

New items

IL-AG9-2P-S3C1, JAE

JAE IL-AG9 In-line Plugs and Sockets These IL-AG9 wire to wire in-line plug and socket housings incorporate a hinge type double hooking mechanism which prevents incomplete terminal insertion and removal plus the pin housing can facilitate a nylon clip for attachment. Note For contacts for use in these IL-AG9 housings see stock number 690-9887 female or 690-9896 male. JAE IL-AG9 Series Automotive Connectors The JAE IL-AG9 Series is a range of compact relay connectors for use in the automotive industry. This IL-AG9 series has a small number of contacts on a 2.5 mm pitch. Twisted mating, mis-mating and reverse insertion are prevented by the design of the housings. A mechanical lock method is used to withstand vibration and pulling.

Product Detail

New items

RP100GGN, Superior Electric

Product Detail

New items

1-480303-0, TE Connectivity

TE Connectivity Commercial MATE-N-LOK Free Hanging Socket (Plug) Housings Commercial MATE-N-LOK free hanging socket (plug) housings with a 5.08mm centreline that accept crimp socket contacts (see stock number 710-0554 typically). These Commercial MATE-N-LOK free hanging socket (plug) housings are made from UL 94V-2 nylon GF, are fully polarized with built in contact stabilization and have self aligning features and locking devices to ensure the connector halves hold together under conditions of severe shock and vibration. For mating connectors see Commercial MATE-N-LOK PCB vertical (stock number 520-264 typically) and right angle mounting (stock number 520-346 typically) pin headers and Commercial MATE-N-LOK PCB vertical socket headers (stock number 520-258 typically) A keying plug is also available - see stock number 712-2261 Dimensions Number of Circuits Length Width 1 22.1 6.6 2 21.9 7.5 3 21.6 7.4 TE Connectivity Commercial MATE-N-LOK Range The Mate-N-Lok commercial range of connectors from TE Connectivity have a wide range of applications including both crimp and IDC terminations for Wire to Wire and Wire to Board. Special features of the Commercial range of Mate N Lok connectors include: Fully polarized nylon housings Easy cavity identification Low insertion/extraction forces required Built in contact stabilization and self-aligning features Locking devices are integral part of design Connector halves will hold together under severe conditions of vibration and shock

Product Detail

New items

560-003-000-311, EDAC

EDAC IP67 560 Series Wire to Wire Plugs From EDAC, a series of superior quality fully waterproof wire to wire connectors. These IP67 rated plugs have pre-assembled housings featuring an integrated seal providing complete waterproof protection guaranteeing no water ingress. The 560 series of connectors have a 2.5 mm pitch and can accommodate a wire size range of 1.0 mm to 1.7 mm. This range of wire to wire connectors are available in 2, 3 and 5 pole arrangements offering a wide range of connection solutions. Operating temperature across the whole series of -40° to + 105°. A hand crimp tool for the 560 series is available, see part number 111-9356 Features and Benefits Fully waterproof with double latch Internal polarisation preventing miss mating Pre-assembled housings and seals Easy crimp and poke Wire to wire and wire to board options Applications Lighting Industrial Pumps Test equipment Emergency vehicles Construction equipment Welding equipment Automotive Sound and broadcast systems IP67 Edac Range

Product Detail

New items

6ESRMC2, TE Connectivity

SR Series IEC Power Inlets C-14 A comprehensive range of snap-in and flange mount unfiltered C-14 power inlets with faston terminals, UL94V-0 rated thermoplastic housings, 250V maximum rated voltage.

Product Detail

Compact Power Connectors

New Items

572-002-000-300, EDAC

794821-1, TE Connectivity

172343-1, TE Connectivity

20ESRM-3, TE Connectivity

1-480318-0, TE Connectivity

794940-1, TE Connectivity

PX0959/P, Bulgin

IL-AG9-2P-S3C1, JAE

RP100GGN, Superior Electric

1-480303-0, TE Connectivity

560-003-000-311, EDAC

6ESRMC2, TE Connectivity

FAQs