RF Terminators Available, Next-Day Delivery.

New items

R404012000, Radiall

Approvals 7777 Radiall BNC RF Coaxial Connectors Brass -bodied connectors with PTFE insulators, and gold plated brass centre contacts. Certain connectors are available in both crimp and clamp braiding options and bulkhead sockets. A commercial range of BNC plugs and bulkhead sockets is available in bulk packs of 100. These have a different specification to the standard Radiall range. See the respective details in the technical specification table below. Radiall Standard Range Radiall 'Commercial' (Bulk) Working voltage 500V Body material Diecast zinc Proof voltage 1.5KV Body plating Nickel Insulation resistance 5GΩmin Contact resistance 10mΩ Frequency ramge dc → 4GHz (50Ω) dc → 1GHz (75Ω) Frequency range dc → 1.5 GHz Climatic characteristics 40/155/21 Centre impact resistance 2mΩ max Outer conductor resistance 0.2Ω max Crimp tooling Cable Type Use crimp tool (s) R58, RG59, RG174 848-391 , 848-436 RG179 848-391 plus die set 282-3502 RG12 241-8380

Product Detail

New items

TMN0111B2-3G-05, Amphenol

Amphenol Coaxial Terminals Shielded Terminations

Product Detail

New items

J01152A0018, Telegartner

SMA Termination Plug Return loss: 34 dB / 2 GHz, 23 dB / 6 GHz Output, 1 W max. Nickel-plated These screw fit connectors have a brass housing, PTFE insulation, gold plated inner conductors and nickel plated outer conductors.

Product Detail

New items

6550.41.AB, Huber & Suhner

Huber+Suhner Terminations Standard Termination Broadband operationability Connectors meet the relevant IEC / MIL / CECC interface standards High repeatability Terminations

Product Detail

New items

65_BNC-75-0-7/133_NE, Huber & Suhner

Terminations Low Power Standard Termination Broadband operationability Connectors meet the relevant IEC / MIL / CECC interface standards High repeatability Huber+Suhner

Product Detail

New items

996074, Axon’ Cable

1 W BNC Loads BNC loads to absorb cable end signals on Ethernet buses or backbones. 1 W load. Fitted with a 25 cm chain with an end ring terminal.

Product Detail

New items

SF8018-6005, Amphenol

Terminators Amphenol SMA Connectors

Product Detail

New items

6560.41.AA, Huber & Suhner

Huber+Suhner Terminations Standard Termination Broadband operationability Connectors meet the relevant IEC / MIL / CECC interface standards High repeatability Terminations

Product Detail

New items

R404131000W, Radiall

Radiall 50 Ohm N Series RF Coaxial Termination Connectors 50 Ohm N series RF coaxial male termination connectors with a nickel plated brass body, gold plated centre contact and PTFE dielectric. These N series male RF coax terminators have the following ratings: Stock number 263-2750 : DC 4 GHz, 1W Stock number 263-2766 : DC 12 GHz, 1W End Terminations Frequency Range 0 to 12.4 dc to 12.4GHz Impedance Ω 50 50 d.c. resistance 75Ω±2% 50Ω±5% Average Power at 25°C (W) 1W 1W VSWR Max. 1.15 dc to 1 GHz 1.05 dc to 4GHz 1.20 dc to 2.5 GHz 1.10, 4 to 8GHz 1.15, 8 to 12.4GHz Temperature Range -55 to +125°C Radiall Attenuators & Terminations Nickel plated brass bodies

Product Detail

New items

090-0210, Yuetsu

Product Detail

New items

R404758000, Radiall

Radiall 4.3-10 Terminators From Radiall, a range of 50 Ω male and female 4.3-10 RF terminators available in 2 W or 30 W versions. The 4.3-10 terminators have brass bodies, beryllium copper contacts and PTFE insulators. The low power 2 W 4.3-10 terminators have a Diamond knurled outer ring for easy grip and are IP67 rated when mated with suitable connectors. The 30 W 4.3-10 terminators have vertical cooling fins and natural convection. All 4.3-10 terminators in this range have a thick film resistor. Features and Benefits 4.3-10 Interface IP67 (low-power versions) when mated with suitable connector 6 GHz maximum frequency range Excellent VSWR performance Robust design Applications Microwave power testing Telecommunication base station integration Radiall 4.3-10 Range

Product Detail

New items

1-1337470-0, TE Connectivity

TE Connectivity 75 Ohm BNC Connector - Plug Termination 75 Ohm BNC plug termination connector with a PTFE dielectric, straight gold plated brass body and gold plated contact. TE Connectivity BNC RF Coaxial Connectors Nominal impedance 50Ω and 75Ω Working Voltage 500Vrms Contact resistance 1.5mΩ max Insulation resistance(initial) 5000MΩ min Dielectric withstand voltage 1500Vrms(sea level) Frequency Range 0 to 4GHz(50Ω) 0-2GHz(75Ω) VSWR 0.2GHz Straight 1.15 max 2.6GHz Straight 1.30 max Durability(cycles) 50 Temperature range -55°C to +85°C Body material Zinc Body plating Nickel Male contact material Brass Female contact material Brass Contact plating Gold Insulation Delrin or Polyethylene

Product Detail

RF Terminators

New Items

R404012000, Radiall

TMN0111B2-3G-05, Amphenol

J01152A0018, Telegartner

6550.41.AB, Huber & Suhner

65_BNC-75-0-7/133_NE, Huber & Suhner

996074, Axon’ Cable

SF8018-6005, Amphenol

6560.41.AA, Huber & Suhner

R404131000W, Radiall

090-0210, Yuetsu

R404758000, Radiall

1-1337470-0, TE Connectivity

FAQs