D Sub Backshells In Sophisticated Designs Available Online

Applications of backshells

There are connector backshells for both industrial and military use. Depending on the kind selected, they can be environmentally friendly or not, utilized for general duty or in extreme conditions, or provide EMI/RFI protection. Heat shrink boots or other supplementary exterior protection, such as circular banding or crimp-ring connector backshells, may be necessary. Consider the angle/profile you need (straight, 90°, or 45°), the coupling technique you need (such as spin, self-lock, or direct), and the type of connection you're using depends on the overall needs of your application when choosing a connector backshell.

Why choose us?

Our extensive D-Sub Backshells, including our own branded Enrgtech, provide a range of solutions to improve stability while maintaining the highest level of cable strain relief to prevent damage to wires and contacts. The screw-type connector included in the standard D-Sub Backshell ensures delivery of a dependable and secure connection method.

New Items

New items

FMH4-4381 / 1731110502, FCT from Molex

Nickel-plated Solid metal hoods with short and long jack screws and anti-kink sleeving The two halves of the hood lock into one another Jack screws can be retrofitted Option of fitting hoods universally using locking mechanisms ( 100–7490 ) Ø 6.5 cable — 14 mm for flat cable and round-flat cable

Product Detail

New items

5745174-5, TE Connectivity

AMPLIMITE D-Sub Connector, Series HDE, HDP RFI/EMI Straight Exit Shielded Backshells AMPLIMITE straight exit two-piece RFI/EMI shielded backshell kits or cable clamps with die cast or metal plated plastic shields for use with HDE Metal-Shell and HDP Metal-Shell (tin plated only) d-sub cable mount connectors. These AMPLIMITE straight exit two-piece RFI/EMI shielded backshell kits accept a variety of shell sizes and cable diameters, please see table for details. Part numbers 5745171-x , 5745172-x , 5747173-x , 5745174-x and 5745175-x have zinc alloy shields plated with bright nickel over bright copper. Part numbers 5745854-x , 5747099-x , 5745833-x , 5747100-x and 5748677-x have thermoplastic shields plated with nickel over copper. Each kit also contains zinc plated stainless steel 4-4- fillister head screws, hex nuts and 4-40 mounting screws. Stock number 680-9355 is also supplied with 4 grommets. For ferrules see stock numbers 718-0730 , 745-5791 and 680-9383 typically For two piece spring latch see stock number 450-9321 Additional Data Stock Number Manufacturer Part Number Product Description Shell Size Maximum Cable O.D. 680-9305 5745171-2 Backshell, Die Cast Shield 1 5.08 mm 680-9301 5745171-1 Backshell, Die Cast Shield 1 6.35 mm 680-9314 5745171-5 Backshell, Die Cast Shield 1 9.40 mm 680-9320 5745172-3 Backshell, Die Cast Shield 2 5.72 mm 680-9131 1-5745172-3 Backshell, Die Cast Shield 2 10.92 mm 680-9317 5745172-1 Backshell, Die Cast Shield 2 9.53 mm 680-9311 5745172-2 Backshell, Die Cast Shield 2 7.62 mm 717-4628 5745173-5 Backshell, Die Cast Shield 3 7.11 mm 680-9336 5745173-4 Backshell, Die Cast Shield 3 8.89 mm 680-9327 5745173-3 Backshell, Die Cast Shield 3 10.92 mm 717-4593 5745173-2 Backshell, Die Cast Shield 3 12.19 mm 680-9323 5745173-1 Backshell, Die Cast Shield 3 13.46 mm 717-4603 5745174-3 Backshell, Die Cast Shield 4 12.70 mm 719-9766 5...

Product Detail

New items

063380, ERNI

Shielded Plastic Backshells These backshells are ideally suited for use with ITT Cannon D*JK filter 'D' connectors They provide an excellent solution for the D*W series as depth of the shell accommodates the extended insulator length of this range EMI/RFI shielding obtained with integrated shielding sheets ESD protected Comes complete with M3 jackscrews (stock no. 224-1512 ) or 4-40 UNC jackscrews (stock nos 224-1562 and rest of module), cable support & assembly screws Maximum height 40mm to cable entry

Product Detail

New items

XM2S-1513, Omron

The Omron D-Sub connector assembly hood belongs to XM2S series, it is mainly used for office equipment interfaces. It has total 15 contacts also it has attached #4-40 lock screw. The metallized plastic hood provides noise protection. It is shielded against electromagnetic interference It is RoHS compliant It is fitted in a rugged, compact metal shell.

Product Detail

New items

XM2S-2512, Omron

The Omron D-Sub connector assembly hood belongs to XM2S series, it is mainly used for office equipment interfaces. It has total 25 contacts also it has attached M3 lock screw. The metallized plastic hood provides noise protection. It is shielded against electromagnetic interference It is RoHS compliant It is fitted in a rugged, compact metal shell.

Product Detail

New items

HDB-CTH(10), Hirose

Product Detail

New items

104370M001, Provertha

Quick Lock D-Sub Metalized Plastic Hoods - Provertha The Provertha Quick Lock range of D-Sub metalized plastic hoods offers a Push_Pull locking system for easy, fast, blind-mating and secure connection of D-Sub cable connectors to D-Sub device interfaces. The 103 series of Quick Lock hoods have 2 cable inputs and the 104 series has 3 cable inputs. These Quick Lock hoods are suitable for use with crimp flanges, internal and external cable clamps. Provertha D Type Connectors

Product Detail

New items

10450DC001, Provertha

Quick Lock D-Sub Die Cast Hoods - Provertha The Provertha Quick Lock range of D-Sub die cast hoods offers a Push_Pull locking system for easy, fast, blind-mating and secure connection of D-Sub cable connectors to D-Sub device interfaces. The 103 series of Quick Lock hoods have 2 cable inputs and the 104 series has 3 cable inputs. These Quick Lock hoods are suitable for use with crimp flanges, internal and external cable clamps. Provertha D Type Connectors

Product Detail

New items

8655MH2501BLF, Amphenol FCI

BACKSHELL DB25 STR METAL SHLD

Product Detail

New items

5748677-3, TE Connectivity

Product Detail

New items

FMK3-K201 / 1731110062, FCT from Molex

FMK Series Metal Hoods, Straight and Angled 45° These FMK Series Metal Hood Backshells have a Large Inner Chamber and an Angled or Straight Cable Outlet. This large amount of internal space is particularly suitable for D-sub connectors with special contacts. The design of the FMK Series Metal Hood Backshell includes strain relief on the cable outlet. The FMK Series Metal Hood Backshell is easy to assemble thanks to the catch spring system and pre-mounted locking screws. The FMK Series Metal Hood Backshells can be used with engagement hooks and locking or knurled screws. FMKx: Angled FMKx G : Straight FMKxx- K201 : Large Cable Outlet FMKx- 4881 : Dual Cable Outlet

Product Detail

New items

FMK5GL-K201 / 1731110218, FCT from Molex

Product Detail

D Sub Backshells

What are D-Sub Connector Backshells used for?

What is the purpose of using a back shell on a connector?

How do I find the backshell for my connector?

Applications of backshells

Why choose us?

New Items

FMH4-4381 / 1731110502, FCT from Molex

5745174-5, TE Connectivity

063380, ERNI

XM2S-1513, Omron

XM2S-2512, Omron

HDB-CTH(10), Hirose

104370M001, Provertha

10450DC001, Provertha

8655MH2501BLF, Amphenol FCI

5748677-3, TE Connectivity

FMK3-K201 / 1731110062, FCT from Molex

FMK5GL-K201 / 1731110218, FCT from Molex

FAQs