Splice Connectors

New items

63130-2, TE Connectivity

The TE Connectivity splice connectors are used to make quick splices or connections with two or more pieces of wire. These splices are normally crimped or soldered so that the power conducted from the source cable to the next cable is transferred at inacceptable conductivity and pull-out resistance performance level. EU RoHS complaint EU ELV complaint

Product Detail

New items

HCRN-5-BLISTER, HellermannTyton

The HellermannTyton releasable wire connector blister pack are used for all types of wires to connect cable and conductors in the field of electrical installation. The connectors can be used in all kinds of junction boxes either on-wall or flush-mounted. Universal push-in wire connector for solid, stranded and fine-stranded wires Wire clamping range 0.2-4.0 mm² Dimensions(mm) height 14 length 26 width 20.5 Maximum current 32A Maximum voltage 450V Material polycarbonate Operating Temperature -30 °C to +85 °C

Product Detail

New items

967398-000, TE Connectivity

Splices Red 0.25 - 1.6 mm² Blue 1.0 - 2.6 mm² Yellow 2.7 - 6.6 mm² Approvals UL Duraseal Heatshrinkable TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint. The TE Duraseal kit is especially suited for use in automotive (approved by most car manufacturers) and marine builds, where environmental sealing is important Kits are also available comprising various heat-shrinkable pre-insulated nylon splices and terminals, covering ranges from 0.5mm² to 6.0mm². Voltage Rating 600 V Insulation Material Nylon Temperature Range -55°C to +125°C Dielectric Strength 7.5kV Terminal Material High Grade Copper Insulation Resistance 10 MΩ Approvals UL Listed

Product Detail

New items

53440-2, TE Connectivity

TE Connectivity ELECTRO-TAP Splices ELECTRO-TAP splices offer an economic method of joining branch or tap wire to solid or stranded for wire ranges 0.5mm - 6.0mm² using insulation displacement self-stripping contacts. These ELECTRO-TAP splice connectors have colour coded nylon housings which double lock when closed. Please see additional data table for insulation diameter and tap wire range. Can be applied using standard pliers Additional Data Stock Number Manufacturer Part Number Number of Tap Wires Insulation Diameter Tap Wire Range 118-5691 735410-0 1 4mm 0.5 - 0.75 mm 2 118-5708 735398-0 1 4mm 1.00 - 2.50 mm 2 284-8494 735411-0 1 5mm 4.00 - 6 mm 2 712-2236 177766-1 1 1.00 - 1.90 mm 0.18 - 0.36 mm 2 731-2943 735411 1 5mm 4.00 - 6 mm 2 731-2947 53440-2 1 4mm 0.50 - 0.80 mm 2 731-2956 735410 1 4mm 0.50 - 0.75 mm 2 731-2959 735398 1 4mm 1.00 - 2.50 mm 2 782-4985 53440-1 1 4mm 0.80 - 2.00 mm 2 795-6499 626437-1 1 4mm 1.00 - 2.50 mm 2

Product Detail

New items

148-00114 HECP-3-32-PC-CL/OG, HellermannTyton

HelaCon Plus HelaCon Plus is a sophisticated push-in wire connector for professional cable connections in electrical housing applications. The newly developed double spring allows easy processing of single core and multi-core conductors and will support installers especially in tricky situations like overhead work. This ensures proper fixing that can optically be checked through the transparent housings. Different colour codes provide a comfortable identification of the different connectors. A separate voltage test entry on the front guarantees safety during application, installation and maintenance. Transparent housing allows quick and easy checking of conductor fitting Separate test entry on front allows use of voltage meter Connector depth 19mm

Product Detail

New items

FVP-2, JST

Parallel Splices JST Insulated Crimp Terminals

Product Detail

New items

221-503, Wago

Mounting carrier for 3-conductor terminal blocks, 221 Series for screw mounting

Product Detail

New items

709836-1, TE Connectivity

TE Connectivity XG7T Type Tubular Terminals TE Connectivity AMPOWER Crimp Terminals

Product Detail

New items

735410-0, TE Connectivity

TE Connectivity ELECTRO-TAP Splices ELECTRO-TAP splices offer an economic method of joining branch or tap wire to solid or stranded for wire ranges 0.5mm - 6.0mm² using insulation displacement self-stripping contacts. These ELECTRO-TAP splice connectors have colour coded nylon housings which double lock when closed. Please see additional data table for insulation diameter and tap wire range. Can be applied using standard pliers Additional Data Stock Number Manufacturer Part Number Number of Tap Wires Insulation Diameter Tap Wire Range 118-5691 735410-0 1 4mm 0.5 - 0.75 mm 2 118-5708 735398-0 1 4mm 1.00 - 2.50 mm 2 284-8494 735411-0 1 5mm 4.00 - 6 mm 2 712-2236 177766-1 1 1.00 - 1.90 mm 0.18 - 0.36 mm 2 731-2943 735411 1 5mm 4.00 - 6 mm 2 731-2947 53440-2 1 4mm 0.50 - 0.80 mm 2 731-2956 735410 1 4mm 0.50 - 0.75 mm 2 731-2959 735398 1 4mm 1.00 - 2.50 mm 2 782-4985 53440-1 1 4mm 0.80 - 2.00 mm 2 795-6499 626437-1 1 4mm 1.00 - 2.50 mm 2 Approvals -

Product Detail

New items

7TAI029580R0003, ABB

The ABB 2F-4 non-insulated butt splice has 1.12 inches in length and has width of 0.377 inch. It is ideal for temperatures of up to 150 degree celsius. Rated for voltages of up to 600V

Product Detail

New items

31819, TE Connectivity

TE Connectivity SOLISTRAND Standard Closed Barrel Butt Splices SOLISTRAND standard closed barrel butt splices designed to terminate solid and stranded wire and irregular shaped conductors. These SOLISTRAND standard closed barrel butt splices are made from fine grade high conductivity copper with tin plating and have closed barrels with brazed seams that create a uniform metal strength around the barrel. The inner surface of the barrels of these SOLISTRAND butt splices are either dimpled or serrated for maximum tensile strength and to maximise the electrical contact area after crimping Note For suitable hand crimp tool see stock number 817-325 and stock number 373-308 for die assembly or hand crimp tool stock number 162-3159 Approvals BS4G178 / UL listed / CSA certified TE Connectivity SOLISTRAND Terminals and Splices

Product Detail

New items

52195, TE Connectivity

TE Connectivity TERMI-FOIL SOLISTRAND Wire Terminals TERMI-FOIL SOLISTRAND wire terminals for use in the manufacture of transformers making it possible to use aluminium foil strip instead of copper wire windings. These TERMI-FOIL wire terminals can be applied to bare, insulated, anodized or coated aluminium and bare or insulated copper wire and have lances that penetrate surface oxides and insulation. When the two faces of these TERMI-FOIL terminals are clamped together these lances embed into the foil or strip creating an air-tight and moisture-proof connection. Typical applications for these TERMI-FOIL wire terminals include air or oil filled transformers, capacitors, reactors, solenoids, relays and regulators. They can also be applied in heating elements, alarm systems and electrostatic shields. Accommodate aluminium foil or strip thickness from 0.03 to 2.41mm and soft copper to 0.025mm Exceed current-carrying requirements No surface preparation necessary No noise injection in low-level audio circuits Will terminate or tap aluminium foil-wound coils Will splice two or more pieces of foil or strip TE Connectivity TERMI-FOIL Terminals and Splices

Product Detail

New Items

63130-2, TE Connectivity

HCRN-5-BLISTER, HellermannTyton

967398-000, TE Connectivity

53440-2, TE Connectivity

148-00114 HECP-3-32-PC-CL/OG, HellermannTyton

FVP-2, JST

221-503, Wago

709836-1, TE Connectivity

735410-0, TE Connectivity

7TAI029580R0003, ABB

31819, TE Connectivity

52195, TE Connectivity

FAQs