LCD Display Modules | Isplay Modules

New items

gen4-PA, 4D Systems

Gen4 Programming Adaptor - gen4-PA The programming adapter is for 4 D Systems gen4 Intelligent display modules it connects to a computer using a micro USB Cable. The alternative is an interface board RS 106-5302 gen4-IB but requires a 4D Programming Cable, or uUSB-PA5 Programming adapter. The gen4-PA programming adapter incorporates the uUSB – PA5-II and the Interface board (gen4-IB) all on one single device. It has a micro USB interface, DIP pads for GPIO breakout and 2.54 mm headers can be mounted to make the interface easier. The gen4 Programming adapter gen4-PA works with the integrated display modules from gen4-uLCD-24PT to gen4-uLCD-70DCT-CLB-SB. Operating Ambient Temperature: -15°C to +65°C Storage Temperature: -30°C to +70°C

Product Detail

New items

EA DEMOPACK-RELAY, Display Visions

DEMO APPLICATION WITH RELAY AND

Product Detail

New items

MOTG-Bluetooth, 4D Systems

MOTG Bluetooth Add-On Module The 4D Systems MOTG (Modules on the Go) product family provides an innovative plug and play solution for adding key functionalities to 4D Systems gen4 LCD Display Modules. Utilising a modular concept, the MOTG range provides a simple method for swift hardware expansion, allowing rapid design and maintenance of applications requiring a display. WiFi, Bluetooth, RS-232, RS-485 and enhanced audio can easily be added to an LCD display through simply plugging in the appropriate module into an installed MOTG interface board. This MOTG Bluetooth Add-On Module provides Bluetooth 4.2 Low Energy capability, allowing a gen4 LCD Module to interface with Bluetooth devices. The module features the 4D Systems Universal MOTG Interface (UMI) to provide plug and play functionality. The module functionality is provided by a Microchip RN4870 Bluetooth Module. Featured is an integrated ceramic chip antenna, secure AES128 encryption and remote over the air configuration capability. A host MCU can dynamically control the RN4870 over UART though the use of an available ASCII command interface. Features Adds Bluetooth capability to gen4 LCD Display Modules Features the Microchip RN4870 Bluetooth Module Bluetooth 4.2 Low Energy stack Integrated Ceramic Chip Antenna ASCII command interface API over UART Remote configuration over the air Supports 2-wire 3.3 V TTL UART interface On board Status LED Universal MOTG Interface (UMI) for plug and play functionality Fits MOTG AC1, AC2 and AC3 Interface Boards Compact – Fitment maintains slim module profile Kit Contents 1 x MOTG Bluetooth Add-On Module 4D Systems Display Accessories

Product Detail

New items

EA DEMOPACK-CLIMA, Electronic Assembly

The Electronic Assembly EA DEMOPACK-CLIMA comes with a 2.8 inches IPS display including PCAP and application board with environmental sensors, such as temperature, humidity and gas sensor for monitoring indoor air quality, equivalent to CO2 values. This miniature touch panel is eminently suited to replace physical switches and controllers in home automation. It has high contrast TFT panel

Product Detail

New items

gen4-MOTG-AC1, 4D Systems

MOTG AC1 gen4 Interface Board The 4D Systems MOTG (Modules on the Go) product family provides an innovative plug and play solution for adding key functionalities to 4D Systems gen4 LCD Display Modules. Utilising a modular concept, the MOTG range provides a simple method for swift hardware expansion, allowing rapid design and maintenance of applications requiring a display. WiFi, Bluetooth, RS-232, RS-485 and enhanced audio can easily be added to an LCD display through simply plugging in the appropriate module into an installed MOTG interface board. This MOTG AC1 Interface Board provides the link between a Diablo16 based gen4 LCD Display and a MOTG Add-On Module. The MOTG Interface Board sits flush on the back of 2.4 to 3.5 Diablo16 gen4 LCD Displays, providing 1 module slot in the Universal MOTG BUS (UMI) format. The board connects to the display via a 30-way FFC Connector. In addition, the MOTG AC1 Interface Board features an extra 30-pin ZIF socket for easy connection to other application boards. A cut-out in the PCB is present to provide access to the microSD card of the gen4 LCD Display Module. Features Allows quick and easy hardware expansion Provides 1 MOTG Module slot Compact – Fitment maintains slim module profile An extra 30-pin ZIF socket for user I/O PCB cut-out for easy access to the LCD microSD Kit Contents 1 x MOTG AC1 gen4 Interface Board 1 x 30-way 150mm FFC Cable

Product Detail

New items

MOTG-CAN, 4D Systems

The 4D Systems MOTG, Modules on the Go is a concept from 4D Systems revolutionizing embedded design allowing instant and flexible hardware expansion solution. MOTG modules offer a simple plug and play interface to Universal MOTG BUS (UMI) allowing rapid assembly and maintenance. This removes the hassle of having to solder and end up with a wiring nest. It also allows the designer to easily remove the existing module or add another module instead. Controller Area Network (CAN Bus) is a multi-master communication network for various industrial and automotive applications. Unfortunately, most microcontroller does not have an on-board CAN Bus controller and transceiver. MOTG-CAN provides a high speed It enables easy connectivity to popular host controllers such as gen4 modules, Arduino, Raspberry Pi and Beaglebone Black Supports CAN V2.0B at 1 Mb/s operation Supports both 3.3V and 5V power supply Maximum of 112 nodes connected MCP2515 CAN Controller

Product Detail

New items

gen4-4DCAPE-ADAPTOR, 4D Systems

gen4 4DCAPE BeagleBone Black Adaptor The 4D Systems gen4 4DCAPE LCD Display Modules with touch are designed specifically for the BeagleBone Black development platform. They provide a simple means of adding a primary display with touch functionality to BeagleBone Black based applications. This 4DCAPE BeagleBone Black Adaptor provides a simple interface between the 4DCAPE Display Module and a BeagleBone Black single board computer. Being in the standard BeagleBone Cape format, the 4DCAPE adaptor simply mounts directly onto the expansion headers of the BeagleBone Black and connects to the 4DCAPE Display via a 30-way FFC connector. No other connections are needed, the BeagleBone Black provides all the necessary power and display signals via the 4DCAPE adaptor. Kit Contents 1 x gen4 4DCAPE adaptor Note The gen4 4DCAPE range of products are compatible with the BeagleBone Black only. A gen4 4DCAPE adaptor is included with each gen4 4DCAPE Display Module. 4D Systems Display Accessories

Product Detail

New items

EA DEMOPACK-RGBANA, Electronic Assembly

The Electronic Assembly EA DEMOPACK-RGBANA comes with a 2.8 inches IPS display including PCAP and application board with RGB LED and potentiometer. This miniature touch panel is eminently suited to replace physical switches and controllers in home automation, for use as control panels in caravans or for integration into kitchen appliances as well as wellness and fitness equipment. It has high contrast TFT panel

Product Detail

New items

EA DEMOPACK-RGBANA, Display Visions

DEMO APPLICATION FOR DRIVING A R

Product Detail

New items

4D-UPA, 4D Systems

The 4D-UPA (Universal Programmer Adaptor) is a universal programmer designed to work with multiple 4D Systems display modules. It has a 30 way FFC connector at the top of the module, for connecting to gen4-uLCD-xx display modules. On the opposite side is a 10 way FFC connector, for connecting to gen4-IoD-xx display modules. Located centrally in the larger rectangular outline, are pads associated with the gen4-uLCD-xx modules. These break out all the signals which come to/from the gen4-uLCD-xx modules. USB 2.0 compliant Full Speed 12Mbps maximum speed, Suspend supported. Hardware or Xon/Xoff handshaking supported, 300bps to 2Mbps Power on reset circuit Virtual COM port drivers allow operation with existing COM port PC applications USB powered Traffic/Operation LED indicates board status Breakout pads of all the signals found in 2.54mm (0.1") spacing

Product Detail

New items

gen4-MOTG-AC2, 4D Systems

MOTG AC2 gen4 Interface Board The 4D Systems MOTG (Modules on the Go) product family provides an innovative plug and play solution for adding key functionalities to 4D Systems gen4 LCD Display Modules. Utilising a modular concept, the MOTG range provides a simple method for swift hardware expansion, allowing rapid design and maintenance of applications requiring a display. WiFi, Bluetooth, RS-232, RS-485 and enhanced audio can easily be added to an LCD display through simply plugging in the appropriate module into an installed MOTG interface board. This MOTG AC2 Interface Board provides the link between a Diablo16 based gen4 LCD Display and up to 2 MOTG Add-On Modules. The MOTG Interface Board sits flush on the back of a 3.2 or 3.5 Diablo16 gen4 LCD Display, providing 2 module slots in the Universal MOTG BUS (UMI) format. The board connects to the display via a 30-way FFC Connector. In addition, the MOTG AC2 Interface Board features an extra 30-pin ZIF socket for easy connection to other application boards and an audio speaker. A cut-out in the PCB is present to provide access to the microSD card of the gen4 LCD Display Module. Features Allows quick and easy hardware expansion Provides 2 MOTG Module slots Compact – Fitment maintains slim module profile An extra 30-pin ZIF socket for user I/O Audio speaker PCB cut-out for easy access to the LCD microSD Kit Contents 1 x MOTG AC2 gen4 Interface Board 1 x 30-way 150mm FFC Cable

Product Detail

New items

EA DEMOPACK-CONNI, Electronic Assembly

The Electronic Assembly EA DEMOPACK-CONNI comes with a 2.8 inches IPS display including PCAP and application board with many level shifter components. This miniature touch panel is eminently suited to replace physical switches and controllers in home automation, for use as control panels in caravans or for integration into kitchen appliances as well as wellness and fitness equipment. It has high contrast TFT panel

Product Detail

Display Interface Kits

New Items

gen4-PA, 4D Systems

EA DEMOPACK-RELAY, Display Visions

MOTG-Bluetooth, 4D Systems

EA DEMOPACK-CLIMA, Electronic Assembly

gen4-MOTG-AC1, 4D Systems

MOTG-CAN, 4D Systems

gen4-4DCAPE-ADAPTOR, 4D Systems

EA DEMOPACK-RGBANA, Electronic Assembly

EA DEMOPACK-RGBANA, Display Visions

4D-UPA, 4D Systems

gen4-MOTG-AC2, 4D Systems

EA DEMOPACK-CONNI, Electronic Assembly

FAQs