LED Drivers Of Improved Quality Available Online With Efficient Delivery.

Types of LED-Drivers:

There are various types of these drivers; however, some of the available drivers include:

Constant Current LED-Drivers:

The constant current across the electronic circuit is maintained; however, the voltage varies. Due to maintenance of the same current, they are widely employed for powering high-power LEDs.

Constant Voltage LED-Drivers:

Unlike constant current drivers that maintain a constant current, constant voltage drivers function as maintaining a constant voltage. These drivers perform their best for LED products with a current control mechanism, like a resistor. In addition, they are ideal for string LEDs, such as LED strips.

Dimmable Drivers:

As the name suggests, they are used to dim LED lighting to the required levels, making them perfect for commercial mood lighting. They are available for dimming control with varied dimming operations.

Factors while considering LED Drivers:

Compatibility:

It is crucial to consider the compatibility of your desired drivers when buying them. Our provided drivers comprise models with varied input/output and configurations to meet the demands of customers’ desired applications. For instance, these are available with varying levels of ingress protection that ensure your lighting setup is secured from environmental factors.

IP Rating:

An IP rating of these drivers shows their water-resistance capabilities. The higher the IP rating, the better they are water-resistant. For instance, IP67 LED-drivers are rugged and best for outdoor applications where they can submerge in water. On the other hand, IP20 drivers are ideal for indoor use.

Applications of LED Drivers:

Basically, the LED-drivers are ideal for converting high-voltage AC to low-voltage direct current.

They also prevent power surges and temperature fluctuations that result in a rise in temperatures and affect light output.

They can also be used for controlling and sequencing LED system brightness.

New Items

New items

TPS92411PDBVT, Texas Instruments

IC LED DRIVER OFFLINE SOT23-5

Product Detail

New items

LYT0006D, Power Integrations

IC LED DRIVER OFFLINE 401MA 8SO

Product Detail

New items

TLC5924DAP, Texas Instruments

IC LED DRIVER LIN 80MA 32HTSSOP

Product Detail

New items

RACD35-2500A, Recom

35W LED Driver, Constant Current, RACD35-A Series The Recom RACD35-A Series is a range of dimmable LED Drivers for constant current LED luminaires. The RACD35-A has a wide input voltage range of 90 to 305 Vac, which means that they can be used worldwide. These class 2 power supplies operate with efficiency of up to 83% and active PFC, with power factors exceeding 0.90, the RACD35-A series is protected against short circuit, overvoltage and over temperature conditions. These LED Drivers come with a 3-in-1 dimming function and can be controlled with analogue, PWM, or external resistor dimming. Due to their IP67 rated enclosures these LED Drivers are protected against dust and moisture and can be installed in industrial or out-buildings, as well as damp rooms like bathrooms or basements. 35W Class II AC-DC LED Power Supply 500, 700, 1000, 1400mA or 2500mA Output Active power factor correction >0.90 Efficiency up to 83% IP67 certified 3 in 1 dimming Standards UL8750, EN61347, EN55015, EN61547 Recom LED Drivers

Product Detail

New items

CAT4137TD-GT3, onsemi

IC LED DRIVER RGLTR DIM TSOT23-5

Product Detail

New items

RCD-24-1.20/W, Recom

Constant Current LED Driver, RCD-24 Series - Wired Non-isolated Drives up to ten 2W power LEDs Constant current source Output current accuracy ±2%, Output current stability ±1% Efficiency up to 96% Wide input voltage range Short circuit protection Compact package Connection Data Wire Function 1 (Red) +Vin 4 (Black) GND 5 (Brown) -Vout 6 (Yellow) +Vout Note Operating temperature is without derating. MTBF to MIL-HDBK-217F (25°C). LED Drivers

Product Detail

New items

OT DIM, Osram

OPTOTRONIC LED Dimming Controller Units These OPTOTRONIC Intelligent LED dimming control units from Osram, can be connected between the LED driver and the LED lighting modules to provide dimming control. Reversible protection for short circuits, over-temperature and overloads

Product Detail

New items

PWM-60-24, Mean Well

Mean Well 60W Dimmable Constant Voltage LED Drivers - PWM-60 Series The Mean Well PWM-60 Series is a range of 60W LED Drivers with a built-in 3 in 1 dimming function and transmitting PWM style output, adapting to all kinds of LED strips and ensuring that colour temperature and brightness is maintained consistent. The PWM-60 LED drivers have a high efficiency of up to 90% and a low no load power consumption below 0. 5W. These LED power supplies are waterproof, with the case made of 94V-0 flame retardant plastic. The interior of the PWM-60 is fully potted in silicone, making these LED drivers suited to meet the anti-vibration demand up to 5G and enhancing the heat dissipation. The PWM-60 LED drivers are IP67 rated and can be used in highly dusty and humid harsh environment. The class II design and the double insulation weather resistant cable makes the PWM-60 Led drivers ideal for flexible installation in applications like LED strip lighting, indoor LED lighting, LED decorative lighting and LED architecture lighting. Universal AC input Built in active PFC function Constant Voltage PWM style output Built-in 3 in 1 dimming function High efficiency of up to 90% Short circuit, over load, over voltage and over temperature protection Fully encapsulated IP67 rated Class II power unit, no FG pin Operating temperature -40°C to +70°C Suitable for dry, damp, wet locations No load power consumption below 0.5W Approvals SELV, cUL, UL, CB, CE Standards UL8750, CSA C22.2 No.250.13, ENEC EN61347-1, EN61347-2-13, EN62384 independent, IP67, design refer to EN60335-1 Mean Well LED Drivers / Power Supplies - IP Rated

Product Detail

New items

RCD-24-0.50/W, Recom

Product Detail

New items

RACD06-700, Recom

Recom 6W Constant Current LED Power Supply - RACD06 Series RACD06 series 6W constant current LED power supply with a single output. This low cost constant current LED power supply has a universal AC input and is suitable for driving six high power LEDs. Universal input voltage range Constant current output Drives 1 to 6 high brightness LEDs 3 kVAC isolation Protections:overload, short circuit, output overvoltage and overtemperature IP44 ingress protection Screw terminal connections Designed to meet harmonic current compliance to EN 61000-3-2: 2006 Note Stock number 737-7060 will drive 6 x 1 W LEDs Stock number 737-7063 will drive 2 x 2 W LEDs For Industrial Use Only, not in scope of Regulation (EC) No 125/2009. Standards Designed to meet Standards: EN55015:2006 + A1: 2007 + A2:2009, EN 61000-3-2:2006, EN 61000-3-3: 2006, EN 61547: 1995 + A1:2000, UL1310, FCC18A Certifications: EN 61347-1:2008, EN 61347-2-13: 2006. Designed to meet UL 8750 Recom - Constant Current LED Power Supply

Product Detail

New items

PCD-40-500B, Mean Well

40W Constant Current Dimmable LED Driver PCD-40 Series The Mean Well PCD-40 Series of LED drivers is a 40W Single Output Constant Current LED power supply with AC phase cut dimming which works with leading edge and trailing edge TRIAC Dimmers. The PCD-40 series have built-in active PFC function, protections including short circuit and over temperature. Fully isolated in a plastic case with strain relief design the unit is IP30 rated and is suitable for indoor LED lighting applications. AC phase-cut dimming Works with leading edge and trailing edge TRIAC Dimmers Built in active PFC function Protections for Short Circuit and Over Temperature Cooling by free air convection Fully isolated plastic case Class 2 Power Unit IP30 Design Suitable for indoor LED lighting applications 100% full load burn in test Low cost High reliability 3 years warranty Mean Well LED Drivers, Constant Current

Product Detail

New items

PLN-60-24, Mean Well

RS - 60W Waterproof (IP64) SMPSU with PFC External switch mode IP64 rated power supplies High efficiency, long life and high reliability Designed for indoor or outdoor installations Suitable for LED lighting and moving sign applications Built-in constant current limiting circuit with adjustable over current protection 100% full load burn-in test Fully regulated output Short circuit, over-load, over-voltage, over-temperature protection 300mm un-terminated, 3-core 18AWG input lead 300mm un-terminated, 2-core 18AWG output lead UL1310 Class 2 power unit, pass LPS EMC compliance to EN 55022 Class B Power factor correction to EN 61000-3-2 Note For Industrial Use Only, not in scope of Regulation (EC) No 125/2009. Power derates above 40°C. MTBF to MIL-HDBK-217F. Approvals TUV, UL recognised for Canada & US Standards TUV EN 61347-1, EN 61347-2-13, UL 1310 Class 2, CAN/CSA C22.2 No. 223-M91 (except for 48V)

Product Detail

LED Drivers

What are alternative names for LED drivers?

Types of LED-Drivers:

Constant Current LED-Drivers:

Constant Voltage LED-Drivers:

Dimmable Drivers:

Factors while considering LED Drivers:

Compatibility:

IP Rating:

Applications of LED Drivers:

New Items

TPS92411PDBVT, Texas Instruments

LYT0006D, Power Integrations

TLC5924DAP, Texas Instruments

RACD35-2500A, Recom

CAT4137TD-GT3, onsemi

RCD-24-1.20/W, Recom

OT DIM, Osram

PWM-60-24, Mean Well

RCD-24-0.50/W, Recom

RACD06-700, Recom

PCD-40-500B, Mean Well

PLN-60-24, Mean Well

FAQs