Led Holders

New items

LZ-3.5, Mac 8

LED Spacer (LZ Series), MAC8 Can be installed squarely on Ø 3, Ø 5 LED Material PPS resin, black (UL94V-0) Colour Black Operating temperature range -40 → +125 °C Compatible LED Ø 3, Ø 5 LED Foot pitch 2.54 mm, 2.5 mm Foot diameter 0.5□, Ø 0.5, Ø 0.6 and under, 0.6□ and under Note Insert the LED in this product and bend at a right angle. LED Mounting Hardware, Mac 8

Product Detail

New items

8900, Keystone

Keystone LED Spacer Mounts - Tri-Lead This family of LED spacer mounts, from Keystone Electronics, are for PCB mounting of tri-lead T-1 (3mm) and T-1 (5mm) LEDs. Their design seperates the leads and retains tri-lead components. The spacer mounts provide height control whilst protecting the leads. It also helps to keep the LED leads stable. These LED spacer mounts are also suitable for use with mounting lamps, resistors, transistors, diodes and capacitors etc. LED Mounting Hardware, Keystone Electronics

Product Detail

New items

LTM-300, Bivar

Bivar LTM Series LED Spacers The LTM series from Bivar is a family of LED spacers for through-hole LEDs. They are designed to elevate the LED from the PCB and offer protection from high temperature environments. LTM spacer mounts feature internal tapered pin dividers to support the LED pins. They are made using a black crystalline polymer with a UL rating. Features of the LTM LED spacers: For 3 mm or 5 mmm through-hole LEDs Vertical mounting Pin dividers Variety of lengths LED Mounting Hardware, Bivar

Product Detail

New items

8669, Keystone

Keystone LED Lens Caps - Round This family of LED lens caps, from Keystone, are in round configurations. They are designed for use with standard 3mm (T-1) and 5mm (T-1 3/4) through-hole LEDs with both diffused and non-diffused lenses. Installation is made easy by snap-in mounting through the panel. The LEDs can then be pushed in by hand, placing them into the cap using light pressure. It is then held securely in place due to the lens cap design. The round lens caps are ideal for protecting the LED against any physical damage, thus potentially improving the life time of the LED in harsher environments. The cap also guards the LED from any electrostatic discharge (ESD) of up to 16KV. Available in a variety of colour options, including clear, the round LED lens caps are made from a polycarbonate material. The coloured caps are ideal for providing high contrast and visibility. Features of the round LED lens caps: For 3mm (T-1) and 5mm (T-1 3/4) LEDs Variety of colours LED Mounting Hardware, Keystone Electronics

Product Detail

New items

8338, Keystone

Keystone LED Spacer Mounts - Bi-Lead This family of PCB LED spacer mounts, from Keystone Electronics, are designed to fit T-1 (3mm) and T-1 (5mm) LEDs. They are self aligning space mounts for bi-lead LEDs. A barrier within the LED spacer mount guides the leads through it to ensure that no crimping or shorting occurs. It also provides positive self-alignment on .100 centers. Available in a range of different length options, the bi-lead LED spacer mounts are moulded from a nylon material. Designed to allow LEDs to be mounted at different heights above the PCB and to minimise mechanical movement, the spacers also have a maximum continuous operating temperature rating of 50°C (3mm types) and 65°C (5mm types) LED Mounting Hardware, Keystone Electronics

Product Detail

New items

LZ-2, Mac 8

LED Spacer (LZ Series), MAC8 Can be installed squarely on Ø 3, Ø 5 LED Material PPS resin, black (UL94V-0) Colour Black Operating temperature range -40 → +125 °C Compatible LED Ø 3, Ø 5 LED Foot pitch 2.54 mm, 2.5 mm Foot diameter 0.5□, Ø 0.5, Ø 0.6 and under, 0.6□ and under Note Insert the LED in this product and bend at a right angle. LED Mounting Hardware, Mac 8

Product Detail

New items

LM-10, Mac 8

LED Spacer (LM Series), MAC8 LED spacer for use with Ø 3, Ø 5 LED head diameter Can also be used with 3-leg type Note LED lead can be inserted through the holes on either side or through the centre hole. LED Mounting Hardware, Mac 8

Product Detail

New items

LM-1.5, Mac 8

LED Spacer (LM Series), MAC8 LED spacer for use with Ø 3, Ø 5 LED head diameter Can also be used with 3-leg type Note LED lead can be inserted through the holes on either side or through the centre hole. LED Mounting Hardware, Mac 8

Product Detail

New items

LM-8, Mac 8

LED Spacer (LM Series), MAC8 LED spacer for use with Ø 3, Ø 5 LED head diameter Can also be used with 3-leg type Note LED lead can be inserted through the holes on either side or through the centre hole. LED Mounting Hardware, Mac 8

Product Detail

New items

8310, Keystone

Keystone Snap-In LED Holders The "snap-in" LED holders, from Keystone, are designed to be used with 3mm (T-1) or 5mm (T-1 3/4) through hole LEDs. The holders can be easily placed into the front panel with the LED snapping into the back of the holder. The holder then keeps the LED securely in place. The 8309 and 8310 LED bezels are ideal for general purpose indicator applications. Their black face improves the appearance of the LED and offers a high contrast with the LED light. 8309 for 3 mm (T-1) LEDs 8310 for 5 mm (T-1 3/4) LEDs LED Mounting Hardware, Keystone Electronics

Product Detail

New items

ELM 1-3MM, Bivar

Bivar ELM 1 Series Self-Retaining LED Mounts The ELM 1 series of LED spacers from Bivar are designed to fit 5mm (T1 3/4) LEDs. The ELM 1 self-retaining narrow profile LED mounts serve as a lead forming fixture while uniformly aligning and elevating LEDs making assembly easier, uniformity better and display enhancement simple. Fit 5mm LEDs with 2 leads Made from extruded PVC LED Mounting Hardware, Bivar

Product Detail

New items

SML 190 CTP, Visual

Visual SML 190 Series Lense Mounts A standard height LED bezel. Made from polycarbonate, this lense mount is conveniently designed for an easy and secure mount. LED Mounting Hardware, Visual

Product Detail

New Items

LZ-3.5, Mac 8

8900, Keystone

LTM-300, Bivar

8669, Keystone

8338, Keystone

LZ-2, Mac 8

LM-10, Mac 8

LM-1.5, Mac 8

LM-8, Mac 8

8310, Keystone

ELM 1-3MM, Bivar

SML 190 CTP, Visual

FAQs