Highly Demanding General Purpose Enclosures Available With Efficient Delivery Online.

New items

FEX 1919 13 G +EKHVT, Fibox

FEX Polycarbonate Enclosure The FEX Series non-metallic enclosures made of polycarbonate (PC). Available with clear transparent or grey covers. These enclosure are designed for use in hazardous environments, manufactured and tested to international standards. Features and Benefits Self-extinguishing and impact resistant Resistant to most acids IP54 Temperature range: -40 °C to +120 °C short term, -10 °C to +80 °C for continuous use. Dimensions: 188 x 188 x 130 mm to 378 x 278 x 180 mm RAL 7035 (IP) Ingress Protection and what it means? IP rating classifies the degrees of protection provided against the intrusion of solid objects (including body parts like hands and fingers), dust, accidental contact, and water in electrical enclosures. Chassis Plates Chassis plates are not available for the following FEX Polycarbonate Enclosures RS Stock no: 199-286, 221-642, 221-658, 221-664, 221-670, 221-686, 221-692, 251-160, 251-176, 251-182, 251-198, 251-205, 251-211, 251-227, 251-233, 251-249 Application Information These highly attractive and ergonomic housings are perfectly suitable for modern industrial electronics. FAQs Can the box be used outside? Yes, FEX series enclosures have an IP54 rating Are they mountable? Yes, they are suitable for wall mounting or portable applications What is supplied? Enclosure, Base with screws for mounting plate/DIN-rail, Cover with silicon gasket and Polyamide cover screws. Note After incorporation of components, further certification must be obtained before use in zone 1. Approvals certificate available on request Approvals EEx e II T6; KEMA certificate no. EX97D3891U

Product Detail

New items

C-6, Serpac

C Series Miniature ABS Boxes 2 piece design Easy location of PCB's within enclosure Flammability classification UL 94 HB

Product Detail

New items

1553BYLBKBAT, Hammond

Hammond 1553 Series Handheld Enclosures The Hammond Soft Sided enclosure is ergonomically designed for hand held comfort. These cases are available in either light grey (RAL 7035) or black (RAL 9011) and comes with or without a battery door and compartment. Features and Benefits Top cover is recessed for membrane display or keypad Printed Circuit Board (PCB) standoffs are moulded into case Includes removable front panel and assembly hardware Over moulded in general purpose ABS plastic with a soft plastic grip Note Battery door and compartment version includes 4 battery clips (for 2 – AA batteries) and a 9 volt (PP3) battery clip.

Product Detail

New items

FEX 1919 18 T enclosure, Fibox

FEX Polycarbonate Enclosure The FEX Series non-metallic enclosures made of polycarbonate (PC). Available with clear transparent or grey covers. These enclosure are designed for use in hazardous environments, manufactured and tested to international standards. Features and Benefits Self-extinguishing and impact resistant Resistant to most acids IP54 Temperature range: -40 °C to +120 °C short term, -10 °C to +80 °C for continuous use. Dimensions: 188 x 188 x 130 mm to 378 x 278 x 180 mm RAL 7035 (IP) Ingress Protection and what it means? IP rating classifies the degrees of protection provided against the intrusion of solid objects (including body parts like hands and fingers), dust, accidental contact, and water in electrical enclosures. Chassis Plates Chassis plates are not available for the following FEX Polycarbonate Enclosures RS Stock no: 199-286, 221-642, 221-658, 221-664, 221-670, 221-686, 221-692, 251-160, 251-176, 251-182, 251-198, 251-205, 251-211, 251-227, 251-233, 251-249 Application Information These highly attractive and ergonomic housings are perfectly suitable for modern industrial electronics. FAQs Can the box be used outside? Yes, FEX series enclosures have an IP54 rating Are they mountable? Yes, they are suitable for wall mounting or portable applications What is supplied? Enclosure, Base with screws for mounting plate/DIN-rail, Cover with silicon gasket and Polyamide cover screws. Note After incorporation of components, further certification must be obtained before use in zone 1. Approvals certificate available on request Approvals EEx e II T6; KEMA certificate no. EX97D3891U

Product Detail

New items

041016060, Rose

ROSE Die-Cast Aluminium Enclosure, 160mm Width, 100mm Height - Aluform Series - 04101606 Features & Benefits Applications How much does this enclosure weigh?

Product Detail

New items

PCT 233011 enclosure, Fibox

Polycarbonate or ABS IP 66//67 Euronorm II series cases Euronord range of enclosures from Fibox are designed to house DIN Rail-mounted terminal blocks and various types of sensors. The outer surface is free of gate marks creating a smooth area for labels, decals or screen printing. Cover screws fully tighten in 4 revolutions, are held captive, but are still removable. The enclosure meets IP66/67 with the installation of a Polyurethane gasket. Features and Benefits The bottom of the case has several attachment humps for mounting internal equipment. The stainless steel fastening screws and polyurethane seal protect the housing. The polyurethane enclosure in the version with a grey or transparent front cover are intended for harsh environments. ABS cases represent a more economical alternative for less demanding interior environments. Applications: terminal blocks, electrical devices, electronics and industrial electronics. Typical Applications Test and Measurement Instrumentation Medical Tools Transportation Equipment Industrial Controls Lighting Applications

Product Detail

New items

74401301, Spelsberg

IP66 AK Compact Range High impact halogen free polystryrene Grey or transparent lids (allowing product visibility) Resistant to most acids and alkalis V2 flammability rating with zero halogen Suitable for mounting electrical & electronic components Integral polyurethane gasket seal Knockout Information 533-7199 is without knockouts 533-7206 is without knockouts 533-7212 is without knockouts 533-7228 has 13 x M20 and 2 x M20/M25 knockouts 533-7234 has 20 x M20, 2 x M20/M25 and 2 x M25/M32 knockouts 533-7256 has 20 x M20, 4 x M20/M25 and 2 x M32/M40 knockouts 533-7262 is without knockouts 533-7739 is without knockouts 533-7278 is without knockouts 533-7284 has 13 x M20 and 2 x M20/M25 knockouts 533-7290 has 20 x M20, 2 x M20/M25 and 2 x M25/M32 knockouts 533-7313 has 20 x M20, 4 x M20/M25 and 2 x M32/M40 knockouts

Product Detail

New items

BIM2001/11-ORG/ORG, CAMDENBOSS

2000 Series General Purpose ABS Cases A range of electronic enclosures with a solid ABS lid, designed for a broad range of applications. Lid and Base moulded in ABS Lid mounted by four M3 machine screws Brass inserts in base for repetitive removal of the lid Low draught angle for mounting control elements on side walls Polished finish for ease of cleaning Excellent properties for machining Integral mounting guides to accept 1.6mm PCBs PCB adaptors (included) for horizontal PCB mounting (except for stock number. 505 -555 ) Withstand temperatures to 85°C Flammability rating of UL94-HB

Product Detail

New items

1518000, Rittal

The Rittal KX terminal box is a small enclosure. This enclosure can be used for many purposes like to house various electronic, electrical and mechanical components, equipment, and devices. An extra protection is provided to the device or equipment or while the equipment is in operation and prevent the ingress of environmental contaminants such as dust and water. This enclosure is without gland plate and is made of sheet steel. Allows flexible interior installation Maintain high protection category IP 66 protection NEMA 4 protection category

Product Detail

New items

1510000, Rittal

The Rittal KX terminal box is a small enclosure. This enclosure can be used for many purposes like to house various electronic, electrical and mechanical components, equipment, and devices. An extra protection is provided to the device or equipment or while the equipment is in operation and prevent the ingress of environmental contaminants such as dust and water. This enclosure is without gland plate and is made of sheet steel. Allows flexible interior installation Maintain high protection category IP 66 protection NEMA 4 protection category

Product Detail

New items

1530000, Rittal

The Rittal KX terminal box is a small enclosure. This enclosure can be used for many purposes like to house various electronic, electrical and mechanical components, equipment, and devices. An extra protection is provided to the device or equipment or while the equipment is in operation and prevent the ingress of environmental contaminants such as dust and water. This enclosure is with gland plate and is made of sheet steel. Allows flexible interior installation Simple and easy cable entry with optimum use of space IP 55 protection NEMA 12 protection category

Product Detail

New items

1610000, Rittal

The Rittal KX bus enclosure is a small enclosure which is a wall-mounted enclosure with door of sheet steel and polycarbonate viewing window. It comes optionally with mounting plate or support rails. Drilled holes for cable glands are already provided, depending on the version. This enclosure can be used for many purposes like to house various electronic, electrical and mechanical components, equipment, and devices. An extra protection is provided to the device or equipment or while the equipment is in operation and prevent the ingress of environmental contaminants such as dust and water. IP 65 protection NEMA 12 protection category Made of sheet steel Bus modules of virtually all makes may be attached

Product Detail

General Purpose Enclosures

New Items

FAQs