Highly Demanding Instrument Cases Available With Same-Day Delivery Online.

New items

1598ASGYPBK, Hammond

The Hammond instrument case is molded from general purpose ABS plastic and suited for mounting printed circuit boards, two sets of vertical 1.5 mm P.C. board guides are molded into case halves front and rear, enclosure halves are secured with self tapping screws threaded into plastic standoffs. Integral horizontal P.C. card mounts on eurocard centers Grey enclosure with black plastic panels IP54 degree of protection

Product Detail

New items

1598RDBK, Hammond

ABS Instrument Case - Shielded Desk top electronic instrument enclosure, ideally suited for mounting printed circuit boards Moulded PCB stand-offs, vertical card guides and brass bushings for repetitive assembly/disassembly Positive fit, tongue and groove construction Flame retardant to UL94V-0 Recessed end panels Plastic Instrument Cases All cases are manufactured from ABS.

Product Detail

New items

PC 21/18-3 enclosure, Fibox

CARDMASTER Polycarbonate Enclosures - IP65 The Cardmaster range of enclosures from Fibox are ideal for packaging instrumentation, measurement, monitoring and process control equipment. The box provides two compartments, one for circuit board insertion and the other for terminals and wiring. RoHS Compliant and Halogen Free Good chemical resistance Electrically insulated Temperature range -40 to +80 °C Flammability rating UL 94-5V Impact resistance IK07 (side surface), IK08 (front surface) Note The aluminium front plates fit flush on the front of the enclosure whereas the polycarbonate front plates have a frame and PUR gasket. Standards EN 62208: 2003 (50298: 1998). EN 60950. GostR.

Product Detail

New items

A9040065, OKW

Two Tone Cases Two-part cases with a solid tongue and groove joint 4 bosses in the base for PCB mounting (no. 4 self-tapping screws) Impact resistant

Product Detail

New items

A9030065, OKW

Two Tone Cases Two-part cases with a solid tongue and groove joint 4 bosses in the base for PCB mounting (no. 4 self-tapping screws) Impact resistant

Product Detail

New items

AWN7-7-20EBB, Takachi Electric Industrial

Takachi AWN Heatsink Aluminium Enclosure The Takachi AWN series is a heavy duty waterproof enclosure ideally suited to tough outdoor environments. These enclosures have diecast side plates and an extruded aluminium body with fins on either side which act as a heat sink. Application examples include LED outdoor power supply case, enclosed switch, controller or industrial camera housing. Heavy duty enclosure Silver or black anodized extruded aluminium body with heat-sink Flanged metallic grey or black powder coated side plates for easy wall mounting PCB or chassis are horizontally mountable by sliding into grooved inner body frame Integral card guides accept 1.6mm PCB IP67 rated Operating temperature -40 to +105°C Maximum torque 1.0N/m (10kgf/cm) Note The inside of end panels are unpainted for EMI shielding on selected models. Supplied with 2 x side plates, 1 x body frame, 2 x silicone gaskets, 8 x stainless steel screws and 4 x rubber feet.

Product Detail

New items

1598BBK, Hammond

ABS Instrument Case - Un-Shielded The Hammond 1598 series is a desktop electronic instrument case ideally suited for mounting printed circuit boards (PCBs). Moulded in flame retardant ABS plastic these enclosures are designed to meet IP54 protection against dust and splashing water. Two sets of vertical 1.5mm PC board guides are moulded into each half of the case, front and rear. The enclosure also has integral horizontal PC card mounts on Eurocard centres. Desk top electronic instrument enclosure, ideally suited for mounting printed circuit boards Moulded PCB stand-offs, vertical card guides and brass bushings for repetitive assembly/disassembly Positive fit, tongue and groove construction Flame retardant to UL94V-0 Recessed front and rear end panels in brushed aluminium Plastic Instrument Cases All cases are manufactured from ABS.

Product Detail

New items

MS133-21-28G, Takachi Electric Industrial

Metal Case, MS Series Cleverly designed assembly-style system case Flat panels slot into frame Front and rear panels can be machined together easily Grey / light grey paint Part name x number of pieces Material / colour / surface processing Front panel x 1 A1050P-H24 2.0 t / HL silver Alumite Rear panel x 1 A1050P-H24 2.0 t / silver Alumite Side frame x 2 A6063S-T5 / grey-coated Front frame x 2 A6063S-T5 / grey-coated Rear frame x 2 A6063S-T5 / silver Alumite Upper cover x 1 SPCC 1.0 t / light grey paint Lower cover x 1 SPCC 1.0 t / light grey paint Corner block x 2 ADC12 / grey paint Rear feet x 2 Flame-retardant ABS ((UL94-VO), textured grey Rubber feet x 4 Polyurethane / black Screws ´ 1 set Steel / chromate / black chromate Part name W (mm) H (mm) D (mm) Empty weight (kg) MS66-16-23G 160 66 230 1.3 MS66-21-28G 210 66 280 1.8 MS66-26-28G 260 66 280 2.1 MS66-32-28G 320 66 280 2.5 MS66-32-35G 320 66 350 3 MS66-37-35G 370 66 350 3.3 MS66-37-45G 370 66 450 4.1 MS66-43-35G 430 66 350 3.7 MS66-43-45G 430 66 450 4.6 MS88-16-23G 160 88 230 1.5 MS88-21-28G 210 88 280 2.1 MS88-26-28G 260 88 280 2.5 MS88-32-28G 320 88 280 2.8 MS88-32-35G 320 88 350 3.2 MS88-37-35G 370 88 350 3.6 MS88-37-45G 370 88 450 4.4 MS88-43-35G 430 88 350 4 MS88-43-45G 430 88 450 5 MS99-16-23G 160 99 230 1.5 MS99-21-28G 210 99 280 2.1 MS99-26-28G 260 99 280 2.4 MS99-32-28G 320 99 280 2.8 MS99-32-35G 320 99 350 3.3 MS99-37-35G 370 99 350 3.6 MS99-37-45G 370 99 450 4.5 MS99-43-35G 430 99 350 4.1 MS99-43-45G 430 99 450 5 MS133-16-23G 160 132.5 230 1.7 MS133-21-28G 210 132.5 280 2.4 MS133-26-28G 260 132.5 280 2.8 MS133-32-28G 320 132.5 280 3.2 MS133-32-35G 320 132.5 350 3.7 MS133-37-35G 370 132.5 350 4.1 MS133-37-45G 370 132.5 450 5 MS133-43-35G 430 132.5...

Product Detail

New items

M5725227, METCASE

METcase Mettec Type A Cases The Mettec Type A case consists of an aluminium front bezel, top and base covers and extruded side and rear panels. A high degree of shielding is guaranteed thanks to its masked internal faces and additional contact points. The guide ridges in the side extrusions of the Mettec case allow mounting of PCBs in several positions. Features and Benefits Aluminium front bezel, top and base covers and extruded side and rear panels Front bezel recessed for fitting optional aluminium front panels Base panel fitted with earth stud Guide ridges in side extrusions for mounting PCBs All parts fully integrated for strength and shielding Supplied fully assembled Fine texture powder polyester finish Anthracite Grey RAL7016 or Off White RAL9002 Applications The Mettec Type A case is designed for small desktop and portable electronics equipment. Applications include measuring and control technology, medical, laboratory and peripheral equipment for computers and networking. Supplied with 1 x front bezel, 2 x side extrusions, top and base covers, rear panel extrusion, 4 non slip feet and fixing screws.

Product Detail

New items

M5635325, METCASE

Unimet Case with Handle An aluminium enclosure for desktop and portable electronic equipment such as controllers and medical devices. Easy to assemble case with a tilt/swivel carry handle Die-cast front bezel in mid-grey (RAL 7040) Folded top section, base and removable rear panel in light grey (RAL 7035) PCB mounting points in base 4 non-slip feet Note Anodised aluminium front panels, eg stock no. 342-9533 and ABS tilt feet, stock no. 209-6205 are available separately.

Product Detail

New items

M5511110, METCASE

Unicase without Handle The Unicase is a simple universal enclosures for measuring and control technology, feedback control, peripheral devices and interfaces, switchboxes, modems, medical field and laboratory technology. The design of the instrument case provides total access resulting in quick and simple assembly. The Unicase has internal assembly extrusions with four guide rail positions for mounting PCBs. Two standard colours light grey and black Simple and fast assembly Removable internal chassis PCB guide rails in the assembly extrusions Aluminium front and rear panels Front panels recessed to protect controls Four push-in non-slip rubber feet Supplied with 4 rubber feet, all fixings and assembly instructions.

Product Detail

New items

191.152.004, ROLEC

IP69K aluCASE Enclosure Fixing points in upper and lower parts provide secure fastening of the integrated components Recesses in the top of the enclosures can accommodate membrane keypads Enclosure can be installed after closing Clip-on design covers conceal the fixing components Access is safeguarded by means of insert lock

Product Detail

Instrument Cases

New Items

1598ASGYPBK, Hammond

1598RDBK, Hammond

PC 21/18-3 enclosure, Fibox

A9040065, OKW

A9030065, OKW

AWN7-7-20EBB, Takachi Electric Industrial

1598BBK, Hammond

MS133-21-28G, Takachi Electric Industrial

M5725227, METCASE

M5635325, METCASE

M5511110, METCASE

191.152.004, ROLEC

FAQs