Connecting Components

New items

3842524480, Bosch Rexroth

Cube Connectors, 2 or 3 way 20mm and 30mm corner cube kits containing all necessary cover caps for a neat finish. The 2 way kits are suitable for structures such as picture frames, and the 3 way kits are suitable for the building of tables and shelving. Self-tapping fasteners and caps included DesignLINE version with special silver paint Profile sizes (mm) Connections Manu. Part Number Finish Type Stock no. 20 x 20 2 3842549858 Die-cast 466-7427 30 x 30 2 3842549862 Die-cast 390-1912 40 x 40 2 3842549866 Die-cast 798-2047 45 x 45 2 3842549870 Die-cast 390-1934 50 x 50 2 3842549874 Die-cast 798-2050 20 x 20 3 3842549860 Die-cast 466-7433 30 x 30 3 3842549864 Die-cast 390-1928 40 x 40 3 3842549868 Die-cast 798-2041 45 x 45 3 3842549872 Die-cast 390-1940 50 x 50 3 3842549876 Die-cast 459-7390 20 x 20 2 3842549859 Painted 523-247 30 x 30 2 3842549863 Painted 523-203 45 x 45 2 3842549871 Painted 523-229 20 x 20 3 3842549861 Painted 523-253 30 x 30 3 3842549865 Painted 523-263 45 x 45 3 3842549873 Painted 523-269 Note Product currently being supplied with a standard grey Non ESD cap

Product Detail

New items

131 400 00020, Rose+Krieger

Base clamp F/FS FS version in industrial design, with side clamping screw with hexagon socket

Product Detail

New items

3842529383, Bosch Rexroth

Angle Brackets Bosch Rexroth angle brackets can be used to make a strong connection between 20 x 20, 30 x 30, 40 x 40, 45 x 45 or 50 x 50 profiles at an angle of 90° . Features & Benefits Brackets are unpainted Includes non-turning centring lugs for rapid and precise alignment Product Application Information Used for shelf supports, structure reinforcement, securing systems to the floor and so on.

Product Detail

New items

3842535576, Bosch Rexroth

Inner Bracket, Strut Connector Easy to assemble Economic solution for constructing door, protective grille, and partition wall frames Available for joining 6 to 6, 8 to 8, 10 to 10 and 8 to10mm groove strut profiles

Product Detail

New items

3842536560, Bosch Rexroth

Plate Plate for fastening hinged feet in profiles without core May also be used as an end or T-connector Material die-cast aluminium Dimensions (mm) Dim M Dim I1 Dim L1 Dim L2 Dim L3 Fixing Screws (x4) 12 30 60 30 11 M8 x 20 12 40 80 40 15 M12 x 20 16 45 90 45 15 M12 x 20 Supplied with fittings

Product Detail

New items

3842549859, Bosch Rexroth

Cube Connectors, 2 or 3 way 20mm and 30mm corner cube kits containing all necessary cover caps for a neat finish. The 2 way kits are suitable for structures such as picture frames, and the 3 way kits are suitable for the building of tables and shelving. Self-tapping fasteners and caps included DesignLINE version with special silver paint Profile sizes (mm) Connections Manu. Part Number Finish Type Stock no. 20 x 20 2 3842549858 Die-cast 466-7427 30 x 30 2 3842549862 Die-cast 390-1912 40 x 40 2 3842549866 Die-cast 798-2047 45 x 45 2 3842549870 Die-cast 390-1934 50 x 50 2 3842549874 Die-cast 798-2050 20 x 20 3 3842549860 Die-cast 466-7433 30 x 30 3 3842549864 Die-cast 390-1928 40 x 40 3 3842549868 Die-cast 798-2041 45 x 45 3 3842549872 Die-cast 390-1940 50 x 50 3 3842549876 Die-cast 459-7390 20 x 20 2 3842549859 Painted 523-247 30 x 30 2 3842549863 Painted 523-203 45 x 45 2 3842549871 Painted 523-229 20 x 20 3 3842549861 Painted 523-253 30 x 30 3 3842549865 Painted 523-263 45 x 45 3 3842549873 Painted 523-269 Note Product currently being supplied with a standard grey Non ESD cap

Product Detail

New items

XCAF 88, FlexLink

Fastener Yokes XC and XF Offers high vibration resistance and a neat flush finish to connect beam ends to beam side.Through hole of 12.2mm must be drilled near the beam end to accept the yoke, use drill fixture stock-no. 326-5519.,To tighten the yoke, use a ball end Allen key.,Beams may be connected end to end, requiring two yokes, two M6 x 50 caphead screws (DIN912,ISO4762) and two M6 hex nuts per joint.

Product Detail

New items

XLAQ 6, FlexLink

T-slot Nuts XC, XF and XD Slot nuts can be inserted directly into the T-slot from the beam face,Features a sprung steel tab to hold the nut in position even in vertical positions.,Plain square nuts (thickness 5mm) must be inserted from the beam ends.

Product Detail

New items

194800280G, Rose+Krieger

Elbow GT W 48 Cast aluminium tube to tube 90°elbow RK Equipment Carrier System Range of Rose & Krieger equipment carrier components to support, contain, and protect control and communication cables. Based on a standardised round steel tube 48mm in diameter, the different system elements can be combined so as to allow individual system structure to be set up within a short time The steel tube is available in three different lengths for cutting to shorter length if required Attachment to the system elements is made with self-tapping Allen screws A free cable passage 40mm in diameter is provided Protection IP 54 according to DIN 40050 (foot stand IP 42) Torque of tube clamp 30Nm Free cable passage Through fittings and tube 40 mm in diameter Tube 48mm diameter Inner galvanised steel tube, OD 48 mm x 4 mm wall thickness, DIN2393 Fitting body Cast aluminium Finish Powder-coat finish to RAL 7043, transport grey

Product Detail

New items

3842527174, Bosch Rexroth

Core Screw, Strut Connector Hex-star Socket Available for 6, 8 and 10mm groove profiles Most cost effective connecting element Special shaped screw head and self-tapping thread produce a conductive connection between the profiles No thread cutting required

Product Detail

New items

182500040200, Rose+Krieger

Type GWZ (with toothing, 15° intervals) 0° to 180° incremental positioning of two round tubes of the same size Dimensions (mm) GWZ 25 GWZ 30 GWZ 40 GWZ 25 GWZ 30 GWZ 40 A 25.1 30.1 40.15 K 136 136 188 B 25.1 30.1 40.15 L 146 146 200 C 45 45 60 M 73 73 100 D 40 40 56 P 33 33 48 E 40 40 56 R M8x40 M8x40 M10x50 G 40 40 56 S M8x35 M8x35 M10x50 H 43 43 60 T M8x35 M8x35 M10x50

Product Detail

New items

96206BC, Rose+Krieger

Reducing Bushes The RK LightClamps plastic connection system guarantees flexibility thanks to the design of its reducing bushes (sold separately). This design enables the clamping of the most various tube sections. The change to other diameters or sections requires only the change of the reduction bush. For Round Tube (R) sizes 14,16,20 and 25, and Square Tube/bar (V) sizes 10 and 20 Features and Benefits Elements made from reinforced polyamide Protection against axial deviation and twisting Compatibility to the BLOCAN® profile system Application Information They are appropriate for sensitive applications under laboratory conditions and for industrial applications as, for instance, in the beverage or packing industry. RK LightClamp range can also be used in the food industry and in wet areas, e. g. the beverage industry. Tube, Tube Joints, Bushes & Clamp Levers Reinforced polyamide clamps and reducing bushes, to accept different sizes of round or square tubing Compatibility with the BLOCAN® profile system Corrosion resistant, ideal for applications in laboratories, the food sector and beverage industries

Product Detail

New Items

3842524480, Bosch Rexroth

131 400 00020, Rose+Krieger

3842529383, Bosch Rexroth

3842535576, Bosch Rexroth

3842536560, Bosch Rexroth

3842549859, Bosch Rexroth

XCAF 88, FlexLink

XLAQ 6, FlexLink

194800280G, Rose+Krieger

3842527174, Bosch Rexroth

182500040200, Rose+Krieger

96206BC, Rose+Krieger

FAQs