Plastic Sheets

New items

RS_257-7322, NYLATRON

Nylon 66 - MoS 2 Filled Modified by addition of Molybdenum Disulpide. Low friction and self-lubricating. Capable of high temperatures and high mechanical strength. High abrasive and ultra-violet light resistant. Suitable for bushes, bearings, gears and wheels etc.,Nylon 66 is unaffected by chlorinated hydrocarbons. Weak acids (pH3) will quickly cause decomposition. Exposure to alkalis (pH>11) and hot water will cause dimensional change due to absorption. Black in colour Max. Service Temp. (Long Term) 100°C Elongation 5 - 35 % (at break) % Tensile Strength 75 MPa Hardness (Rockwell-Shore D) M100 (Rockwell) Flammability Rating UL 94 HB Water Absorption 7% at saturation Nylatron® / MoS 2 Filled Nylon These materials are abrasion resistant and self-lubricating and have reasonably good chemical resistance to weak acids.

Product Detail

New items

RS_257-7372, NYLATRON

Nylon 66 - MoS 2 Filled Modified by addition of Molybdenum Disulpide. Low friction and self-lubricating. Capable of high temperatures and high mechanical strength. High abrasive and ultra-violet light resistant. Suitable for bushes, bearings, gears and wheels etc.,Nylon 66 is unaffected by chlorinated hydrocarbons. Weak acids (pH3) will quickly cause decomposition. Exposure to alkalis (pH>11) and hot water will cause dimensional change due to absorption. Black in colour Max. Service Temp. (Long Term) 100°C Elongation 5 - 35 % (at break) % Tensile Strength 75 MPa Hardness (Rockwell-Shore D) M100 (Rockwell) Flammability Rating UL 94 HB Water Absorption 7% at saturation Standards 7777 Nylatron® / MoS 2 Filled Nylon These materials are abrasion resistant and self-lubricating and have reasonably good chemical resistance to weak acids.

Product Detail

New items

RS_193-5430, NYLATRON

Cast Nylon 6 - MoS 2 Filled Modified by addition of Molybdenum Disulpide. Low friction and self-lubricating. Capable of high temperatures and high mechanical strength. High abrasive and ultra-violet light resistant. Suitable for bushes, bearings, gears and wheels etc. Black in colour Max. Service Temp. (Long Term) 100°C Elongation 40 - 60 % (at break) % Tensile Strength 65 MPa Hardness (Rockwell-Shore D) M88 (Rockwell) Flammability Rating UL 94 HB Water Absorption 6% at saturation Standards DIN 50 014 Nylatron® / MoS 2 Filled Nylon These materials are abrasion resistant and self-lubricating and have reasonably good chemical resistance to weak acids.

Product Detail

New items

RS_314-0173, Tufnol®

Tufnol®, 6F/45 6F/45 is a fine weave cotton fabric combined with modified epoxy resin to produce a rigid sheet material with outstanding electrical performance. The key benefits of this material are: Very high resistance to electrical tracking Mechanically strong and wear resistant Resistant to a wide range of chemicals Conforms to BS2572 Type F6 and EN60893 Type EP CC 301 Can be machined to high tolerance with a good machined finish Cross Bearing Strength 170 MPa Dielectric Strength In Oil At 90°C 80 kV (edgewise) Compressive Strength (Flatwise) 290 MPa Compressive Strength (Edgewise) 190 MPa Maximum Service Temperature (longterm) 130°C Relative Density 1.36 g/cm 3 Specfic Heat At 23°C 1.5 kJ/kgK Thermal Coductivity At 23°C 0.36 W/m K Water Absorption 0.55 mg/cm² Standards BS 2572 Type F6; EN 60893 Type EP CC 301

Product Detail

New items

RS_193-5496, NYLATRON

Cast Nylon 6 - MoS 2 Filled Modified by addition of Molybdenum Disulpide. Low friction and self-lubricating. Capable of high temperatures and high mechanical strength. High abrasive and ultra-violet light resistant. Suitable for bushes, bearings, gears and wheels etc. Black in colour Max. Service Temp. (Long Term) 100°C Elongation 40 - 60 % (at break) % Tensile Strength 65 MPa Hardness (Rockwell-Shore D) M88 (Rockwell) Flammability Rating UL 94 HB Water Absorption 6% at saturation Standards DIN 50 014 Nylatron® / MoS 2 Filled Nylon These materials are abrasion resistant and self-lubricating and have reasonably good chemical resistance to weak acids.

Product Detail

New items

RS_325-7091, DuPont

Acetal Homopolymer - Delrin® Delrin® has similar properties to Acetal Copolymer but with better mechanical and machining properties. Resistance to hot water and alkalis is slightly inferior. Max Service Temp. 100°C Elongation 40% Tensile Strength 70 MPa Hardness (Rockwell-Shore D) M90 Rockwell Flammability Rating UL 94 HB Water Absorption 0.5% at saturation Acetal Copolymer & Homopolymer Both materials are available in rod and sheet form, they are abrasion and impact resistant and exhibit good chemical resistance. They are easy to machine and have excellent self lubricating properties. Both are UV light resistant and can be welded.

Product Detail

New items

RS_257-7316, NYLATRON

Nylon 66 - MoS 2 Filled Modified by addition of Molybdenum Disulpide. Low friction and self-lubricating. Capable of high temperatures and high mechanical strength. High abrasive and ultra-violet light resistant. Suitable for bushes, bearings, gears and wheels etc.,Nylon 66 is unaffected by chlorinated hydrocarbons. Weak acids (pH3) will quickly cause decomposition. Exposure to alkalis (pH>11) and hot water will cause dimensional change due to absorption. Black in colour Max. Service Temp. (Long Term) 100°C Elongation 5 - 35 % (at break) % Tensile Strength 75 MPa Hardness (Rockwell-Shore D) M100 (Rockwell) Flammability Rating UL 94 HB Water Absorption 7% at saturation Nylatron® / MoS 2 Filled Nylon These materials are abrasion resistant and self-lubricating and have reasonably good chemical resistance to weak acids.

Product Detail

New items

RS_314-0167, Tufnol®

Tufnol®, 6F/45 6F/45 is a fine weave cotton fabric combined with modified epoxy resin to produce a rigid sheet material with outstanding electrical performance. The key benefits of this material are: Very high resistance to electrical tracking Mechanically strong and wear resistant Resistant to a wide range of chemicals Conforms to BS2572 Type F6 and EN60893 Type EP CC 301 Can be machined to high tolerance with a good machined finish Cross Bearing Strength 170 MPa Dielectric Strength In Oil At 90°C 80 kV (edgewise) Compressive Strength (Flatwise) 290 MPa Compressive Strength (Edgewise) 190 MPa Maximum Service Temperature (longterm) 130°C Relative Density 1.36 g/cm 3 Specfic Heat At 23°C 1.5 kJ/kgK Thermal Coductivity At 23°C 0.36 W/m K Water Absorption 0.55 mg/cm² Standards BS 2572 Type F6; EN 60893 Type EP CC 301

Product Detail

New items

RS_193-5468, NYLATRON

Cast Nylon 6 - MoS 2 Filled Modified by addition of Molybdenum Disulpide. Low friction and self-lubricating. Capable of high temperatures and high mechanical strength. High abrasive and ultra-violet light resistant. Suitable for bushes, bearings, gears and wheels etc. Black in colour Max. Service Temp. (Long Term) 100°C Elongation 40 - 60 % (at break) % Tensile Strength 65 MPa Hardness (Rockwell-Shore D) M88 (Rockwell) Flammability Rating UL 94 HB Water Absorption 6% at saturation Standards DIN 50 014 Nylatron® / MoS 2 Filled Nylon These materials are abrasion resistant and self-lubricating and have reasonably good chemical resistance to weak acids.

Product Detail

New items

RS_325-7209, DuPont

Acetal Homopolymer - Delrin® Delrin® has similar properties to Acetal Copolymer but with better mechanical and machining properties. Resistance to hot water and alkalis is slightly inferior. Max Service Temp. 100°C Elongation 40% Tensile Strength 70 MPa Hardness (Rockwell-Shore D) M90 Rockwell Flammability Rating UL 94 HB Water Absorption 0.5% at saturation Standards 7777 Acetal Copolymer & Homopolymer Both materials are available in rod and sheet form, they are abrasion and impact resistant and exhibit good chemical resistance. They are easy to machine and have excellent self lubricating properties. Both are UV light resistant and can be welded.

Product Detail

New items

RS_325-7085, DuPont

Acetal Homopolymer - Delrin® Delrin® has similar properties to Acetal Copolymer but with better mechanical and machining properties. Resistance to hot water and alkalis is slightly inferior. Max Service Temp. 100°C Elongation 40% Tensile Strength 70 MPa Hardness (Rockwell-Shore D) M90 Rockwell Flammability Rating UL 94 HB Water Absorption 0.5% at saturation Acetal Copolymer & Homopolymer Both materials are available in rod and sheet form, they are abrasion and impact resistant and exhibit good chemical resistance. They are easy to machine and have excellent self lubricating properties. Both are UV light resistant and can be welded.

Product Detail

New items

RS_197-4508, DuPont

Acetal Homopolymer - Delrin® Delrin® has similar properties to Acetal Copolymer but with better mechanical and machining properties. Resistance to hot water and alkalis is slightly inferior. Max Service Temp. 100°C Elongation 40% Tensile Strength 70 MPa Hardness (Rockwell-Shore D) M90 Rockwell Flammability Rating UL 94 HB Water Absorption 0.5% at saturation Acetal Copolymer & Homopolymer Both materials are available in rod and sheet form, they are abrasion and impact resistant and exhibit good chemical resistance. They are easy to machine and have excellent self lubricating properties. Both are UV light resistant and can be welded.

Product Detail

New Items

RS_257-7322, NYLATRON

RS_257-7372, NYLATRON

RS_193-5430, NYLATRON

RS_314-0173, Tufnol®

RS_193-5496, NYLATRON

RS_325-7091, DuPont

RS_257-7316, NYLATRON

RS_314-0167, Tufnol®

RS_193-5468, NYLATRON

RS_325-7209, DuPont

RS_325-7085, DuPont

RS_197-4508, DuPont

FAQs