Electronics Varnishes

New items

843ER-800ml, MG Chemicals

MG Chemicals Super Shield 843ER Conductive Coatings MG Chemicals 843ER is a silvered copper, epoxy conductive paint. Containing epoxy means that the coating is suitable for using when you need tough durability. Designed to use in challenging environments, the paint remains highly conductive even after long-term exposure to excessive temperature changes, salt fog and humidity. Features and Benefits The silver copper powder is non-magnetic Cost effective Does not scratch or fade Can be cured at room temperature Volume resistivity of 0.0018 Ωcm Strong chemical resistance Typical Applications High-frequency EMI/RFI shielding in harsh environments Sensors, controllers, communication devices, and other electronic equipment which could be exposed to difficult environments Use as a base for electroplating and grounding Note More details on using and application can be found on the technical datasheet. Conductive Paint

Product Detail

New items

842AR-140G, MG Chemical

842AR is a conductive coating that consists of a one-part, solvent-based acrylic lacquer, pigmented with an extremely conductive silver flake. It is smooth, hard, and abrasion resistant. It can be easily applied by brush or spray. It has a quick dry time, with no heat cure necessary. It adheres strongly to most injection-molded plastics, such as ABS, PBT and PVA. It provides superior high frequency shielding. It also provides strong corrosion resistance, and is suitable for use in marine environments. 842AR is designed to provide a conductive coating for the interior of plastic electronic enclosures that suppresses EMI/RFI emissions. It excels when the highest level of shielding is required. Also, its thin minimum layer height makes it suitable for board level applications. Provides superior EMI/RFI shielding over a broad frequency range Resistivity of 7.6 x 10-5 ohmcm Can be applied very thin, 0.2 mil minimum coating thickness Mild solvent system, and safe on polystyrenes HAP free does not contain toluene, xylene, or MEK.

Product Detail

New items

843AR-340g, MG Chemicals

MG Chemicals Super Shield 843AR Conductive Coatings MG Chemicals 843AR super shield is a high conductive silver coated copper lacquer for giving you long-term protection from EMI/RFI. The quick drying acrylic conductive lacquer reduces the loss of metallisation through rubbing. Once cured the 843AR coating becomes hard and smooth. Features and Benefits Tough and durable Low surface resistance Low VOCs Quick drying No heat cure required High Conductivity - Low Surface resistivity of 0.21 Ω/sq for one coat (1.0 mil) Typical Applications Repairing damage to existing shielding Manufacturing of Sensors, medical equipment, electric vehicles, mobile phones, electric guitars and many more To provide electric continuity for your circuits Note 843AR is not compatible with water, oil and greasy flux residue. Always clean the surface to be coated before using. More details on using and application can be found on the technical datasheet. Caution When you want to keep the original surface intact, use with care. Conductive Paint

Product Detail

New items

838AR-900ml, MG Chemicals

MG Chemicals 838AR Total Ground Conductive Coatings The black 838AR total ground lacquer from MG Chemicals is a carbon conductive coating that has been designed to give you strong adhesion to many materials. The one part acrylic lacquer has been pigmented with a highly conductive carbon powder. Feature and Benefits Quick drying time Apply using a brush or spray No heat curing is required Strong corrosion resistant HAP free Cost effective Adheres to ABS, polycarbonate and other injection moulded plastics Available in different sizes as an aerosol or can Typical Applications Suitable for marine environments Use for grounding or RFI shielding applications Note Refer to the technical datasheet for more technical information and typical applications Conductive Paint

Product Detail

New items

76009, Kontakt Chemie

Kontakt Chemie Graphit 33 The Kontakt Chemi Graphit 33 is a black, electrically conductive graphite coating for manufacturing lubricating films and anti-static coatings. The specially formulated, spray conductive coating has an organic binder which provides a conductive coating layer to non-conductive media. Features and Benefits Sticks to materials such as glass, plastics and wood Contains a high level of pure and fine graphite powder Good electrical conductivity Typical Applications Use the conductive lacquer to avoid electrostatic build-up in packaging materials and housings of electronic equipment as well as to repair damaged shields and as pre-coat for Galvano-plating of non-conductive materials.

Product Detail

New items

841AR-P, MG Chemicals

NICKEL CONDUCTIVE PEN

Product Detail

New items

31892-AB, Ambersil

SV100 - Electric Spray Varnish Electric Spray Varnish provides a tough, impervious insulating seal – ideal for components subjected to difficult environments and high humidity. Insulates all types of electrical systems against high humidity Tough and impervious Dries rapidly to form a thin film of red varnish Highly effective in sealing potential leakage paths, including high voltage transformers and switchgear Excellent noise reduction characteristics Resists transformer oils and moisture When cured, conforms to BS 5629 type 1.1 (IEC 85) Suitable for use in thermal Class B and F insulating systems

Product Detail

New items

30799-AH, Kontakt Chemie

Product Detail

New items

75009, Kontakt Chemie

Kontakt Chemie Urethan 71 The Kontakt Chemie Urethan 71 is a protective varnish for your PCBs. The transparent, air drying varnish protects and insulates in humid environments. Features and Benefits Air drying Use in humid environments Use in temperatures between -40°C and +120°C Typical Applications For use on PCBs and transformers, and for providing subsequent insulation for armature coils on electric motors

Product Detail

New items

841AR-900ml, MG Chemicals

MG Chemicals Super Shield 841AR Conductive Coatings The grey super shield 841AR from MG Chemicals is a nickel conductive paint that protects your electronic devises from EMI and RFIs issues. The easy to use solvent based, acrylic lacquer is pigmented with nickel flake and does not need heat to cure. The highly conductive 841AR has been designed for apply to the interior of your plastic electronic enclosures helping devices pass FCC emission testing. Features and Benefits Durable and abrasion resistant Quick drying HAP Free Easy to use Safe on polystyrenes Can be cured at room temperature Sticks well to plastics, aluminium, copper, wood and many other surfaces Typical Applications Use to repair existing shielding damage, as a conductive undercoat when electroplating, to give you electric continuity of your circuits. Also use the paint on medical equipment, sensors, mobile phones, laptops or other communication devices. Refer to the datasheet for more details. Conductive Paint

Product Detail

New items

841WB-850ml, MG Chemicals

MG Chemicals Super Shield 841WB Conductive Coatings MG Chemicals super shield 841WB is a conductive paint that you can apply easily using a paintbrush, roller or spray gun. The one-part conductive coating has been designed to reduce electromagnetic or radio frequency interference (EMI/RFI) in your electronic applications. It is a durable acrylic coating pigmented with a high purity nickel flake that can be painted over with common architectural paint. The 841WB shielding paint bonds well to drywall. The cured coating is tough, durable, and provides effective shielding. Features and Benefits Easy to use No dilution required High conductivity Non-flammable Cures at room temperature Sticks to plastics, wood, metal and ceramics Long-term protection Low toxicity Typical Applications Use 841WB in engine rooms to stop creating EMI/RFI noise in another room or outside area. Use in rooms that contain your sensitive electronic equipment. Use instead of solvent-based shielding paints. Works well on drywall. Note More information can be found on the technical datasheet Caution Do NOT freeze. Approvals UL approved for adhesion to ABS and polycarbonates at hot and cold temperatures Conductive Paint

Product Detail

New items

841AR-340g, MG Chemicals

MG Chemicals Super Shield 841AR Conductive Coatings The grey super shield 841AR from MG Chemicals is a nickel conductive paint that protects your electronic devises from EMI and RFIs issues. The easy to use solvent based, acrylic lacquer is pigmented with nickel flake and does not need heat to cure. The highly conductive 841AR has been designed for apply to the interior of your plastic electronic enclosures helping devices pass FCC emission testing. Features and Benefits Durable and abrasion resistant Quick drying HAP Free Easy to use Safe on polystyrenes Can be cured at room temperature Sticks well to plastics, aluminium, copper, wood and many other surfaces Typical Applications Use to repair existing shielding damage, as a conductive undercoat when electroplating, to give you electric continuity of your circuits. Also use the paint on medical equipment, sensors, mobile phones, laptops or other communication devices. Refer to the datasheet for more details. Conductive Paint

Product Detail

New Items

843ER-800ml, MG Chemicals

842AR-140G, MG Chemical

843AR-340g, MG Chemicals

838AR-900ml, MG Chemicals

76009, Kontakt Chemie

841AR-P, MG Chemicals

31892-AB, Ambersil

30799-AH, Kontakt Chemie

75009, Kontakt Chemie

841AR-900ml, MG Chemicals

841WB-850ml, MG Chemicals

841AR-340g, MG Chemicals

FAQs