Controllers - Accessories

SIMATIC ET 200SP, Base Unit BU15-P16+A10+2B, BU type A0, Pack quantity: 10 units, Push-in terminals, with 10 AUX terminals, bridged to the left, WxH: 15 mmx141 mm

Communications processor CP 1242-7 V2 for connection of SIMATIC S7-1200 to GSM/GPRS network, Web server access to CPU, data point configuration

Analogue Output Module Two channel analogue output module with 12-bit resolution ±10V output, or 11-bit resolution 4-20mA output. SIMATIC S7-200 analogue output modules Note Expansion modules cannot be used with S7-221. S7-200 Expansion Modules for 2nd & 3rd Generation A range of digital and analogue expansion modules to increase the I/O capacity of the S7-200 CPUs. A maximum of 2 modules can be used with S7-222, with a maximum of 78 I/O, up to 7 modules may be used with S7-224 and S7-226 CPUs, with a maximum of 128 I/O 248 respectively. The modules are available in 24Vdc or 85-245Vac powered versions, and include digital input, output and combined forms, plus analogue input, output and temperature sensor modules. In addition to digital signals the S7-200 series can process analogue signals from sensors or actuators directly by using an analogue expansion module. Module Type Stock no. Input Ranges or Types Output Input Module 434-1816 0-5V, 0-10V, 0-20mA, ±2.5V or ±5V None RTD Input Module 434-1844 Pt100, Pt200, Pt500, Pt1000, Pt10k Cu10, Ni10, Ni120, Ni1000 R 150, 300 & 600 Ohms FS None Thermocouple Module 434-1850 Type J, K, T, E, R, S, N, and 80mV FS None Output Module 434-1822 None ±10V or 4-20mA

SENSOR TEMP ANLG VOLT PROBE

LOGO! Mounting Kits LOGO! and SIPLUS LOGO! are designed for quick and easy mounting on standard rails. With the mounting kit, these devices can also be easily and safely installed in front panels. If the supplied washer and seals are used, the devices are reliably protected against harsh environmental conditions up to the IP65 degree of protection. Siemens LOGO! 5 Series The 6th Generation LOGO! brings you additional features aimed at keeping the LOGO! at the forefront of this technology. LOGO! is small but provides a simple but powerful solution for control applications, at a price which can give significant time, space and cost savings when compared with alternative methods. Major improvements over previous LOGO! units include: PI loop control Analogue multiplexing Adjustable display contrast User selectable power up screen Plus all of the following features: Easy to use and simple to configure, no PLC programming knowledge required 12 I/O onboard expandable up to 24 inputs, 16 outputs and 8 analogue inputs Digital Inputs configurable as 0 – 10Vdc analogue inputs depending on model Relay: 10(3)A Transistor outputs: 0.3A max. resistive 130 function blocks (each block equivalent to multiple steps of ladder) 8 standard logic functions, 25 special functions including on/off delay timers, real time clock unless specified otherwise, with automatic summer/winter changeover, up/down counters, analogue comparison, message window, shift register plus more Integrated retention facility to store status information, in case of power failure May be used as part of a larger and more powerful control system, by providing local control of a process or piece of equipment Can be connected to an AS-i network using AS-i expansion module Backlit 4 line by 12 character LCD display shows built in functions during programming and status information and user defined messages during operation with the exception of LOGO!Pure Ability to change parameters via function keys and...

S7-1200 Extension cable Extension cable for SIMATIC S7-1200 CPUs, digital modules and analog modules. Extension cable for two-tier configuration For connecting digital/analog signal modules Siemens S7-1200

CONNECTOR SET 2-PIN (KP32F)

MILLENIUM SLIM USB DONGLE