Lighting Ballasts

New items

QTP-OPTIMAL 1x18-40, Osram

QUICKTRONIC PROFESSIONAL OPTIMAL Electronic Control Gear The Osram Quicktronic Professional Optimal is an electronic control gear for fluorescent and compact fluorescent lamps. This ECG guarantees a long lamp life and is not affected by frequent on/off switching. The Quicktronic Optimal is the perfect electronic ballast for use with motion sensor lighting. This Osram ECG has a very high efficiency, thanks to its cut-off technology. Ideal applications for the Quicktronic Professional Optimal ECG are in emergency lighting systems, industry, offices, corridors, storage rooms, public buildings, sports halls, strip lighting and modernization of existing systems. Long lamp life No adverse effect from frequent on/off switching Automatic restart after lamp replacement Perfect lamp start for applications with motion sensors Very high energy efficiency due to cut-off technology Supply voltage: 220-240V Line voltage: 198-264V Line frequency: 0 Hz | 50 Hz | 60 Hz Lamp start with optimum filament preheating Lifetime: up to 100,000 hours Energy Efficiency Index EEI: A2 BAT Automatic shutdown of defective lamps and at end of life Approvals VDE/VDE EMC Standards EN 61347-2-3, EN 60929

Product Detail

New items

QTP-OPTIMAL 2x18-40, Osram

QUICKTRONIC PROFESSIONAL OPTIMAL Electronic Control Gear The Osram Quicktronic Professional Optimal is an electronic control gear for fluorescent and compact fluorescent lamps. This ECG guarantees a long lamp life and is not affected by frequent on/off switching. The Quicktronic Optimal is the perfect electronic ballast for use with motion sensor lighting. This Osram ECG has a very high efficiency, thanks to its cut-off technology. Ideal applications for the Quicktronic Professional Optimal ECG are in emergency lighting systems, industry, offices, corridors, storage rooms, public buildings, sports halls, strip lighting and modernization of existing systems. Long lamp life No adverse effect from frequent on/off switching Automatic restart after lamp replacement Perfect lamp start for applications with motion sensors Very high energy efficiency due to cut-off technology Supply voltage: 220-240V Line voltage: 198-264V Line frequency: 0 Hz | 50 Hz | 60 Hz Lamp start with optimum filament preheating Lifetime: up to 100,000 hours Energy Efficiency Index EEI: A2 BAT Automatic shutdown of defective lamps and at end of life Approvals VDE/VDE EMC Standards EN 61347-2-3, EN 60929

Product Detail

New items

BE 218-4-UN, ELT

100V to 260V Electronic Ballasts for T8 Fluorescent Tubes Class I built-in multi-voltage ballasts for T8 tubes. Versatile multi-voltage capability (100 to 260V) therefore also suitable for 110V site lighting applications. Ignition with pre-heating in cathodes for long lamp life without flashes and flickering Constant total power and stabilised luminous flux High frequency operation High energy efficiency Corrected stroboscopic effect Allows the use of Class I and Class II luminaires without screening to earth in the lamps Over voltage protection 350Vac (2 hours) Rapid conncetor with fixing spring. Circular conductor section: 0.5 - 1.5 mm²

Product Detail

New items

HF-P 3/414 TL5 III, Philips Lighting

Philips HF-Performer III High Frequency Ballast for TL5 Lamps The Philips HF-Performer III TL5 is a slim high frequency electronic ballast for TL5 and TL5 Eco fluorescent lamps. It is ideal for applications where high energy efficiency is required. The HF Performer III has a robust design, meets all relevant international safety and performance standards and is energy efficient. Rated lamp type: TL5 Rated number of lamps: 3/4 Line voltage: 220 - 240V @50/60Hz Housing dimensions: L280mm x H21mm x W39mm Lifetime: 100000 hours approx. Ignition method: programmed start Approvals ENEC VDE-EMV IEC 60598-2-22 CE

Product Detail

New items

913713031666, Philips Lighting

Product Detail

New items

4008321873729, Osram

Osram Quicktronic Professional Optimal Lighting Ballast Features and Benefits Typical Applications Osram Quicktronic Optimal Alternatives 873-5035 873-5038 873-5032 873-5041

Product Detail

New items

4008321971258, Osram

QUICKTRONIC FIT Electronic Control Gear The Osram Quicktronic FIT 5 is an electronic control gear for fluorescent lamps. This ECG guarantees a long lamp life and is not affected by frequent on/off switching. The Quicktronic FIT 5 is the perfect electronic ballast for use with motion sensor lighting. This Osram ECG has very high energy efficiency, thanks to its cut-off technology. Ideal applications for the Quicktronic FIT 5 ECG are in emergency lighting systems, offices, corridors, storage rooms, public buildings, strip lighting and modernization of existing systems. Long lamp life No adverse effect from frequent on/off switching Automatic restart after lamp replacement Perfect lamp start for applications with motion sensors Very high energy efficiency due to cut-off technology Supply voltage: 220-240V Line voltage: 198-264V Line frequency: 50 Hz | 60 Hz Lamp start with optimum filament preheating Energy Efficiency Index EEI: A2 Automatic shutdown of defective lamps and at end of life

Product Detail

New items

22185212, Tridonic

Tridonic PC T5 PRO Electronic Fixed Output Fluorescent Ballasts Highest CELMA Energy Efficiency Index A2 BAT Nominal life time up to 100,000 h (at ta 50 °C with a failure rate max. 0.1 % per 1,000 h) Large temperature range Intelligent Voltage Guard (overvoltage indication and undervoltage shutdown) Precise lamp operation using adjustment of lamp parameters Advanced SMART-Heating for min. 50,000 starts without replacement of lamps Constant luminous flux irrespective of fluctuations in mains voltage Designed for THD For luminaires of protection class I and protection class II Automatic start after replacement of defective lamps Safety shutdown of defective lamps and at end of lamp life (EOL 2) Insulation Displacement Connection (IDC) terminal for rapid automatic or manual wiring For emergency lighting systems as per EN 50172

Product Detail

New items

QT-FIT5 1X14-35 / 220-240v, Osram

QUICKTRONIC FIT Electronic Control Gear The Osram Quicktronic FIT 5 is an electronic control gear for fluorescent lamps. This ECG guarantees a long lamp life and is not affected by frequent on/off switching. The Quicktronic FIT 5 is the perfect electronic ballast for use with motion sensor lighting. This Osram ECG has very high energy efficiency, thanks to its cut-off technology. Ideal applications for the Quicktronic FIT 5 ECG are in emergency lighting systems, offices, corridors, storage rooms, public buildings, strip lighting and modernization of existing systems. Long lamp life No adverse effect from frequent on/off switching Automatic restart after lamp replacement Perfect lamp start for applications with motion sensors Very high energy efficiency due to cut-off technology Supply voltage: 220-240V Line voltage: 198-264V Line frequency: 50 Hz | 60 Hz Lamp start with optimum filament preheating Energy Efficiency Index EEI: A2 Automatic shutdown of defective lamps and at end of life

Product Detail

New items

QTP-M 1X26-42/220-240 S, Osram

QUICKTRONIC-M Electronic Control Gear for Circular Fluorescent Lamps The Osram Quicktronic-M is an electronic control gear for circular fluorescent lamps. This ECG guarantees a long lamp life and is not affected by frequent on/off switching. The Quicktronic -M is the perfect electronic ballast for use with motion sensor lighting. Ideal applications for the Quicktronic-M ECG are in emergency lighting systems, public buildings, sports halls, factories and a wide range of other applications. Long lamp life No adverse effect from frequent on/off switching Perfect lamp start for applications with motion sensors Supply voltage: 220-240V Line voltage: 198-264V Lamp start with optimum filament preheating Energy Efficiency Index EEI: A2 Automatic shutdown of defective lamps and at end of life

Product Detail

New items

HFR158TLDII, Philips Lighting

High Frequency Dimming Lamps can be dimmed down to 3% Can be dimmed from a low voltage potentiometer Flicker free warm start Automatic start after lamp replacement Ideal for daylight and/or presence linking Low noise operation

Product Detail

New items

22185219, Tridonic

Tridonic PC T8 PRO Electronic Fixed Output Ballasts for Fluorescent Lamps Highest possible energy class CELMA EEI = A2 BAT Nominal life time up to 100000 hours (at 50 °C) Large temperature range Intelligent Voltage Guard (overvoltage indication and undervoltage shutdown) Precise lamp operation using adjustment of lamp parameters Advanced SMART Heating for min. 50000 starts without replacement of lamps Constant luminous flux irrespective of fluctuations in mains voltage Designed for THD For luminaires of protection class I and protection class II Automatic start after replacement of defective lamps Safety shutdown of defective lamps and at end of lamp life Insulation Displacement Connection (IDC) terminal for rapid automatic or manual wiring For emergency lighting systems as per EN 50172 Approvals Ballast Directive Energy Efficient Requirements: CELMA EEI = A2 BAT Standards EN 50172

Product Detail

New Items

QTP-OPTIMAL 1x18-40, Osram

QTP-OPTIMAL 2x18-40, Osram

BE 218-4-UN, ELT

HF-P 3/414 TL5 III, Philips Lighting

913713031666, Philips Lighting

4008321873729, Osram

4008321971258, Osram

22185212, Tridonic

QT-FIT5 1X14-35 / 220-240v, Osram

QTP-M 1X26-42/220-240 S, Osram

HFR158TLDII, Philips Lighting

22185219, Tridonic

FAQs