Surge Suppressor | Transient Voltage Surge Suppressor

New items

2905987, Eaton Fulleon

Phoenix Contact SEC Lightning Arresters, DIN Rail Features and benefits: Spark gap has no line follow currenta Free of leakage current, suitable for use in the pre-meter area High continuous voltage of 350 V AC for 230/400 V AC networks with high voltage fluctuations Pluggable Low voltage protection level of 1.5 kV Optical, mechanical status indicator With floating remote indication contact Plugs can be checked with CHECKMASTER 2 DIN Rail mounted for safety, convenience and easy accessibility. When to use lightning arrester? Energy supplies Building installation equipment Telecommunications Wind power Machine-building Datacenters Complete Line:

Product Detail

New items

7TCA085400R0289 OVR CAT-5E, ABB

ABB Surge Suppressor Unit The ABB OVR series surge suppressor unit is a protective device to ensure that electrical equipment is not damaged by a sudden voltage spike. It has an electrical rating of 5V and 10kA. It is a combined category D, C, B tested protector suitable to protect twisted pair Ethernet networks, including Power over Ethernet (PoE) with RJ45 connections. For use at boundaries up to LPZ 0 to protect against flashover (typically the service entrance location) through to LPZ 3 to protect sensitive electronic equipment. Features and Benefits Low capacitance circuitry prevents the start-up signal degradation associated with other types of network protector Low in-line resistance minimizes unnecessary reductions in signal strength to maximize signalling distance Operating temperature ranges between -40°C and 80°C Panel mount device Sturdy ABS housing with convenient holes for flat mounting or vertically via TS35 'Top Hat' DIN rail Substantial earth connection to enable effective earthing Suitable for systems signalling on up to eight wires of either shielded or unshielded twisted pair cable Very low let-through voltage between all lines Will protect all PoE powering modes A and B Applications Industries Certifications IEC 61643-21

Product Detail

New items

2907928, Phoenix Contact

Product Detail

New items

2908204, Phoenix Contact

Phoenix Contact TTC Series A professional range of Phoenix Surge Protection Devices. These surge protection devices come with integrated status indicator and knife disconnection for either a 2 or 3 wire floating signal circuit. All products are highly reliable and of excellent quality. Features and Benefits - 6 mm overall width - Push-in connection technology - Integrated status indicator without auxiliary energy and option of remote signaling - Integrated knife disconnection for easier maintenance work Surge Protection Devices, SPDs (DIN-rail) Voltage surges, often referred to as spikes or transients are typically caused by switching of fluorescent lights, fuses blowing or nearby lightning activity. The worst voltage surges are usually caused by lightning and can reach up to 6000V, with current surges of over 3000A. The maximum size of the voltage and current surges depends on the location within the building's wiring system. BS7671: 2011 Amendment 1 Sections 443 and 534 cover risk assessment and provides guidance on protection of electronic equipment for installation engineers to follow. The fullest information on lightning and surge protection comes from the BSEN 62305 series of standards.

Product Detail

New items

DPA CLE IP66, Dehn

Patch cable with surge protection Easy to retrofit

Product Detail

New items

7TCA085460R0112 ESP 415M1, WJ Furse

Enhanced surge protector Accessories 456-8112 798-3539

Product Detail

New items

DG M TNC 440 FM, Dehn

DEHNguard Modular Surge Arresters Type 2 DEHNguard Modular Type 2 surge arrestors, supplied as a prewired base with plug in modules Energy coordinated with other Dehn Redline products in accordance with BS7671 amendment 1 High discharge capacity using heavy duty metal oxide varistors and spark gaps Status indication using Thermo Dynamic Control for monitoring of the SPD Tool less replacement of the plugs for repair and test functions Surge Protection Devices, SPDs (DIN-rail) Voltage surges, often referred to as spikes or transients are typically caused by switching of fluorescent lights, fuses blowing or nearby lightning activity. The worst voltage surges are usually caused by lightning and can reach up to 6000V, with current surges of over 3000A. The maximum size of the voltage and current surges depends on the location within the building's wiring system. BS7671: 2011 Amendment 1 Sections 443 and 534 cover risk assessment and provides guidance on protection of electronic equipment for installation engineers to follow. The fullest information on lightning and surge protection comes from the BSEN 62305 series of standards.

Product Detail

New items

83230110, Mersen

STP T23 20 is the series of combined Type 2+3/Class II+III devices for discharging voltage surges while providing a very fine voltage protection level. Suitable as the final stage of protection in panels with Type 2 protection devices installed upstream such as STP T2 40 SPDs. These SPDs should be installed as close as possible to the equipment being protected.

Product Detail

New items

2CTB815704R0200 OVR T2 1N 40-275s P TS QS, ABB

Type 2 surge protective devices are designed to protect electric installations and sensitive equipment against indirect surges with ensuring a low protection level (Up). They are characterized by their capacity to safely discharge current with 8/20 μs wave form Patented QuickSafe ® technology Safety Reserve system Din rail mounting Pluggable Improved safety Back up protection up to 160 A Fuse or 125 A Mcb

Product Detail

New items

DG M TT 2P 275 FM, Dehn

DEHNguard Modular Surge Arresters Type 2 DEHNguard Modular Type 2 surge arrestors, supplied as a prewired base with plug in modules Energy coordinated with other Dehn Redline products in accordance with BS7671 amendment 1 High discharge capacity using heavy duty metal oxide varistors and spark gaps Status indication using Thermo Dynamic Control for monitoring of the SPD Tool less replacement of the plugs for repair and test functions Surge Protection Devices, SPDs (DIN-rail) Voltage surges, often referred to as spikes or transients are typically caused by switching of fluorescent lights, fuses blowing or nearby lightning activity. The worst voltage surges are usually caused by lightning and can reach up to 6000V, with current surges of over 3000A. The maximum size of the voltage and current surges depends on the location within the building's wiring system. BS7671: 2011 Amendment 1 Sections 443 and 534 cover risk assessment and provides guidance on protection of electronic equipment for installation engineers to follow. The fullest information on lightning and surge protection comes from the BSEN 62305 series of standards.

Product Detail

New items

BVT AD 24, Dehn

DEHN Data Signal Surge Arresters DEHN data signal surge arresters for industrial process control circuits, the protection of the low voltage power supply and the I/O of PLC applications using sensors and transducers. Combined lightning current and surge arresters for signal and data lines with one base design common to all Yellow line plugs Activsense technology automatically detects the signal voltage from 0 to 180v and adapts the voltage protection level for optimal performance Integrated LifeCheck monitoring function ensuring highest availability and rapid detection of damaged arrestors Power protection unit for PLC DC power supply systems in a slim DIN housing Surge Protection Devices, SPDs (DIN-rail) Voltage surges, often referred to as spikes or transients are typically caused by switching of fluorescent lights, fuses blowing or nearby lightning activity. The worst voltage surges are usually caused by lightning and can reach up to 6000V, with current surges of over 3000A. The maximum size of the voltage and current surges depends on the location within the building's wiring system. BS7671: 2011 Amendment 1 Sections 443 and 534 cover risk assessment and provides guidance on protection of electronic equipment for installation engineers to follow. The fullest information on lightning and surge protection comes from the BSEN 62305 series of standards.

Product Detail

New items

2906858, Phoenix Contact

Phoenix Contact Surge Protection A professional range of Phoenix Surge Protection Devices. These surge protection devices come with a mixture of Fine, Medium and Coarse surge protection. They also come with a mixture of integrated status indicators with floating signal circuit and grounded reference potential. All products are highly reliable and of excellent quality. Features and Benefits - 6 mm overall width - Push in connection technology - Integrated status indicator without auxiliary energy and option of remote signalling Surge Protection Devices, SPDs (DIN-rail) Voltage surges, often referred to as spikes or transients are typically caused by switching of fluorescent lights, fuses blowing or nearby lightning activity. The worst voltage surges are usually caused by lightning and can reach up to 6000V, with current surges of over 3000A. The maximum size of the voltage and current surges depends on the location within the building's wiring system. BS7671: 2011 Amendment 1 Sections 443 and 534 cover risk assessment and provides guidance on protection of electronic equipment for installation engineers to follow. The fullest information on lightning and surge protection comes from the BSEN 62305 series of standards.

Product Detail

Surge Suppressor Units

New Items

2905987, Eaton Fulleon

7TCA085400R0289 OVR CAT-5E, ABB

2907928, Phoenix Contact

2908204, Phoenix Contact

DPA CLE IP66, Dehn

7TCA085460R0112 ESP 415M1, WJ Furse

DG M TNC 440 FM, Dehn

83230110, Mersen

2CTB815704R0200 OVR T2 1N 40-275s P TS QS, ABB

DG M TT 2P 275 FM, Dehn

BVT AD 24, Dehn

2906858, Phoenix Contact

FAQs