Plastic Pipes

Rigid Nylon 12 Pipe Blue coloured Nylon 12 (unplasticised) rigid pipe, available in 15 and 22mm OD sizes, and supplied in 3m lengths. Air Ring Main System The John Guest system of push-in fittings and pipe, designed for use with air, provide the ideal connection from compressor receiver to air line service components through to complete ring main and take off points. No need to prepare threaded pipe or apply solvent Easy and quick to install, simple push-in connections Safe, secure and leak-proof, ready for immediate use Unique collet locking system holds tube firmly without deformation or flow restriction Easy to disconnect and reconfigure the system Instruction leaflet included Temperature Range 0 to + 70°C Working Pressure @ +23°C = 10 bar (145 psi) Working pressure @ +70°C = 7 bar (101 psi) Pipe tolerances: +0.05 to -0.10mm OD Material, pipe: rigid (unplasticised) Nylon 12 Material, fittings: bodies engineering plastic (black acetal copolymer) or brass 'O' Rings: Nitrile rubber Collets: acetal polymer with stainless steel teeth

Rigid Nylon 12 Pipe Blue coloured Nylon 12 (unplasticised) rigid pipe, available in 15 and 22mm OD sizes, and supplied in 3m lengths. Air Ring Main System The John Guest system of push-in fittings and pipe, designed for use with air, provide the ideal connection from compressor receiver to air line service components through to complete ring main and take off points. No need to prepare threaded pipe or apply solvent Easy and quick to install, simple push-in connections Safe, secure and leak-proof, ready for immediate use Unique collet locking system holds tube firmly without deformation or flow restriction Easy to disconnect and reconfigure the system Instruction leaflet included Temperature Range 0 to + 70°C Working Pressure @ +23°C = 10 bar (145 psi) Working pressure @ +70°C = 7 bar (101 psi) Pipe tolerances: +0.05 to -0.10mm OD Material, pipe: rigid (unplasticised) Nylon 12 Material, fittings: bodies engineering plastic (black acetal copolymer) or brass 'O' Rings: Nitrile rubber Collets: acetal polymer with stainless steel teeth

Polyplumb Barrier Pipe PolyPlumb pipe is a traditional grey pipe system which combines with PolyPlumb fittings to provide the most comprehensive grey plumbing solution on the market. Made from polybutylene, the pipes create a flexible and efficient hot and cold water plumbing and heating systems. Features and Benefits • Ready for use straight out of the coil • Flexible • Works with the PolyPlumb fittings range Product Application Information Suitable for domestic hot and cold water plumbing and heating systems. Approvals Kitemarked, British Gas & WRAS Approved Air Ring Main System The John Guest system of push-in fittings and pipe, designed for use with air, provide the ideal connection from compressor receiver to air line service components through to complete ring main and take off points. No need to prepare threaded pipe or apply solvent Easy and quick to install, simple push-in connections Safe, secure and leak-proof, ready for immediate use Unique collet locking system holds tube firmly without deformation or flow restriction Easy to disconnect and reconfigure the system Instruction leaflet included Temperature Range 0 to + 70°C Working Pressure @ +23°C = 10 bar (145 psi) Working pressure @ +70°C = 7 bar (101 psi) Pipe tolerances: +0.05 to -0.10mm OD Material, pipe: rigid (unplasticised) Nylon 12 Material, fittings: bodies engineering plastic (black acetal copolymer) or brass 'O' Rings: Nitrile rubber Collets: acetal polymer with stainless steel teeth

Barrier Pipe - Speedfit Cross-linked to polythene pipe tested to DIN 16892 Supplied in either 2 metre lengths in bundles of five or in 25 metre coils Note Pipe inserts are recommended for installations using plastic pipe (see this section) Approvals Approved to WRC, BBA, PKM, PEM Caution DO NOT USE FOR: Gas, fuel oil or compressed air applications Standards BS EN ISO 9001: BS 7291 Parts 1 & 3 Class S Approvals WRC; BBA; PKM; PEM Standards BS EN ISO 9001; BS 7291 Parts 1 & 3 Class S SpeedFit Tube, Conduits & Tube Inserts Pipe Suitability - Speedfit fittings can be used with: Copper pipe to BS2871 Part 1 / BSEN 1057: 1996, Speedfit cross linked polyethylene (PEX) Barrier Pipe to BS7291. Speedfit fittings cannot be used on stainless steel pipe.,Applications - Mains fed and indirect cold water systems, vented and unvented hot water systems and vented and sealed central heating systems.,Material - Polysulfone, Acetal

Polyplumb Barrier Pipe PolyPlumb pipe is a traditional grey pipe system which combines with PolyPlumb fittings to provide the most comprehensive grey plumbing solution on the market. Made from polybutylene, the pipes create a flexible and efficient hot and cold water plumbing and heating systems. Features and Benefits • Ready for use straight out of the coil • Flexible • Works with the PolyPlumb fittings range Product Application Information Suitable for domestic hot and cold water plumbing and heating systems.

PVC-U Pipe, Imperial & Metric - 2m length High quality PVC-U fittings, valves, pipework and accessories for a wide range of exterior and interior applications. The chemical resistance properties of PVC-U are excellent; it is resistant to most solutions of acids, alkalis and salts and to solvents that can be mixed with water. PVC-U is not resistant to aromatic and chlorinated hydrocarbons. PVC has excellent chemical resistance which combined with smoothness of bore eliminates build up of scale and gives good flow characteristics. Odourless and tasteless, suitable for conveying drinking water and many food products Jointing is by solvent weld cement Tin stabilised compound conforming to the EEC safety levels for vinyl chloride monomer (VCM) and the WRAS requirements for use with potable water Water Regulations Advisory Scheme, approved product for potable water Permissible working temperature range for PVC-U systems is 0°C to 60°C PVC-U fittings in imperial sizes for solvent cement jointing are manufactured in accordance with BS4346: Part 1, and are suitable for jointing PVC-U pipe to BS3505 & BS3506 All PVC-U metric pipe and fittings are manufactured in accordance with ISO/EN 15493 Pressure versus temperature ratings Temperature (°C) -40 -20 0 20 30 40 50 60 PVC-U Metric bar n/a n/a 16 16 13 10 7 3.4 psi n/a n/a 235 235 190 147 103 50 PVC-U Imperial bar n/a n/a 15 15 13.5 10.5 6.7 2.2 psi n/a n/a 217 217 195 152 97 32 Note Next day delivery cannot be guaranteed on these plastic pipes- road carrier service only