Thermostatic Mixing Valves

Altecnic Mechant Thermostatic Mixing Valves Thermostatic mixing valves are used to maintain the domestic hot water supplied to the user at a constant and safe temperature, when variations in the hot and cold water supply conditions and draw off flow rates occur. The failsafe design shuts off the mixed water flow automatically in the event of disruption in the hot or cold water supply to the valve Max. working pressure: 10 bar - Static Min. working temperature 0.2 Bar : Dynamic Max. inlet temperature: 85°C Inlet temperature range - hot supply: 52 - 65°C - cold supply: 0.5 - 20°C D08 working pressure - low pressure: 0.2 - 1.0 - high pressure: 1.0 - 5.0 Max. inlet pressure ratio (H/C or C/H): 5:1 Accuracy: ±2°C Setting Range: 30 to 50°C Body DZR - chrome plated: BS EN 12165 CW602N Springs: Stainless steel Seals: EPDM Note The merchant range of fail safe thermostatic mixing valves have been designed and manufactured to meet the requirements of BS 7942:2000 and the National Health Service model engineering specification D08 for use in healthcare premises, hospitals, care homes, and schools. Standards BS EN 1111: 1999 and BS EN 1287: 1999 and the TMV2 Type Scheme Basin, Bath & Shower Valves A range of thermostatically controlled mixer valves all capable of operating with a hot/cold or cold/hot pressure ratio imbalance of up to 10:1,All units incorporate check valves to prevent cross-flow between supplies, and strainers to reduce damage due to contamination.,Connections are via the compression fixings using either 15 or 22mm pipe.

Ausimix TMV2 & TMV3 Thermostatic Mixing Valves Dual approval TMV2 and TMV3 for complete flexibility Rapid failsafe on eiter hot or cold supply failure Provides stable mixed water temperature Complies with Part G and NHS MES D08 specification Flat faced union connections for ease of maintenance Unique temperature adjustment tool incorporated into the cap Body and fittings: DZR Brass, Nickel plated Seals: Viton Spring: Stainless steel Strainers: Stainless steel Washers: Tesnit Note Reliance Water Control’s Ausimix is a thermostatic mixing valve approved for both the TMV2 and TMV3 schemes making this valve suitable for healthcare, domestic and commercial/general public use Approvals WRAS, TMV2 and TMV3 Standards BSEN 1111, BS 7942, NHS MES D08 Basin, Bath & Shower Valves A range of thermostatically controlled mixer valves all capable of operating with a hot/cold or cold/hot pressure ratio imbalance of up to 10:1,All units incorporate check valves to prevent cross-flow between supplies, and strainers to reduce damage due to contamination.,Connections are via the compression fixings using either 15 or 22mm pipe.

Careflo Thermostatic Fail Safe Mixing Valve Thermostatic mixing valves are used to maintain the domestic hot water supplied to the user at a constant and safe temperature, when variations in the hot and cold water supply conditions and draw off flow rates occur. The mixcal careflo range has been designed for use in care homes and other premises required to provide a duty of care, especially to the young and elderly. The valve is designed primarily for single user outlets including wash basins, showers, baths and bidets but is also suitable for multiple outlet use. Temperature adjust range: 30 - 50°C Temperature control: ±2°C Maximum hot inlet temperature: 85°C Minimum temperature differential requirement for fail safe: 10°C Maximum inlet temperature 85°C Maximum working pressure 10 bar Temperature adjustment 30-65°C Body DRZ - chrome plated Cartridge and Shutter Brass Springs: Stainless steel Seals: EPDM Note The mixcal careflo fail safe valve has been designed to meeting the requirements of the latest National Health Service model engineering specification D08 and BS 7942:2000 for use in care homes Basin, Bath & Shower Valves A range of thermostatically controlled mixer valves all capable of operating with a hot/cold or cold/hot pressure ratio imbalance of up to 10:1,All units incorporate check valves to prevent cross-flow between supplies, and strainers to reduce damage due to contamination.,Connections are via the compression fixings using either 15 or 22mm pipe.