Pneumatic T Fittings

Male Branch Tee KQ2T The KQ2T male branch tee fittings from SMC are quick and easy to install into your pneumatic fittings. These KQ2T male branch tees are also more compact in design which means that these tees can be used within a confined space. Male branch tees are designed to branch a female thread at 90° angles. The new KQ2 range of products are lighter than previous models and have the advantage of improved insertion and removal forces. Can be used under a wide range of pressures from a low vacuum to 1MPa Low force required for fitting and removal Compact dimensions for use within smaller spaces Thread-to-Tube Adaptors Sealant coated threads minimise assembly time. The fittings can be used on vacuum or positive pressure lines. Suitable for use with nylon, soft nylon or polyurethane tube for compressed air or water (general industry) conveyance Maximum operating pressure 10 bar Maximum vacuum operating pressure -100kPa Proof pressure 3MPa Ambient and fluid temperature -5 to +60°C (water 0 - 40°C) All thread sizes are specified as R(PT) (taper) type

Stud Branch Tee Adaptor - Male Taper & Parallel Thread A high-quality polymer push in fitting suitable for compressed air applications. The LF3000 fittings can be used in systems with a working pressure from a vacuum of 0.9 bar to a positive pressure of 20 bar. These fittings are suitable for use with all plastic pneumatic plastic tubing and are 100% leak tested during manufacture. For the connection of 2 tubes at a 90° angle to a threaded port. Features and Benefits Full bore design Exceptionally low leak rate Available with BSPP and BSPT threads Suitable for Vacuum or pressure applications ISO 14743 compliant Date coded for traceability and reliability Automatically seals in both dynamic and static situations Note In the Thread Size column, R indicates taper thread and G indicates parallel thread. Threaded Tube Adaptors, Elbows and Tees 4 to 12mm compact fittings Suitable for 99% vacuum Push-in assembly: no tools required Disconnect by depressing release collet Plastic body Nitrile O-rings A range of pneumatic elbow and tee adaptors for converting push-in to threaded type connections. All types have a maximum operating pressure of 20 bar and an operating temperature range of -20 to +80°C.