Pneumatic Replacement Filter Elements

New items

P31KA00ESE, Parker

Filter Elements Replacement Filters for Parkers P31 range of coalescing, adsorber and particlulate filters. P31 Series - Next Generation

Product Detail

New items

SMC Micro Mist and Super Mist Elements A selection of replacements elements from the SMC, suitable for use with AM, AMD, AME and the AMF separator series. Filters, Lubricators and Separators High flow capacity filters, lubricators and separators with polycarbonate bowls. All have an ambient and media temperature range of 5 - 60°C and a proof pressure of 15 bar.

Product Detail

New items

AFM40P-060AS, SMC

Element for AF20-40 Series Mist Separators A selection of elements designed to be used with the AF20-40 series mist separators. AF Series Replacement Parts and Accessories A selection of elements designed to be used with the AF20-40 series micro mist separators.

Product Detail

New items

LFP-D-MAXI-5M, Festo

The Festo D series MAXI filter cartridge used in conjunction with service units. Grade of filtration - 5 μm

Product Detail

New items

MS4/D-MINI-LFM-B, Festo

The Festo D series fine filter has a 1 μm grade of filtration used for MS and D series . Size - MINI

Product Detail

New items

MS6-LFM-B, Festo

The Festo MS series fine filter cartridge has a 1 μm grade of filtration. Filter unit is free of copper and PTEE material. Size - 6

Product Detail

New items

MS6-LFP1-C, Festo

Festo Replacement Filter Element For MS Series, Size 6, PE Material - MS6-LFP1-C Features & Benefits Applications Can I use this replacement filter element in wet environments? What substances can I use this cartridge with?

Product Detail

New items

010AA, Domnick Hunter

Oil-X Evolution Series Filters - General Purpose Grade AO & High Efficiency Grade AA Meets and exceeds requirements for compressed air quality Improved air flow management for low energy consumption. Oil vapour removal Drainage ribs and no wet band formation Improved element replacement Fully corrosion protected Incident monitor (available separately) to indicate premature high differential pressure. It can be retrofitted to existing housings without depressurising the system. Fixing clamps (available separately) allow the joining of two filters and act as wall mounting brackets Technical Specification - Filter units Max. Operating Pressure 16 bar (232 psi) Max. Operating Temperature 80°C (176°F) Min. Operating Temperature 1.5°C (35°F) Technical Specification - Element Grade AO High efficiency general purpose protection, particle removal down to 1 micron, including water and oil aerosols. Maximum remaining oil aerosol content: 0.6mg/m3 at 21°C (0.5 ppm(w) at 70°F) Technical Specification - AA Grade Elements For high efficiency oil removal/filtration prcede with AO grade filter Particle removal down to 0.01 microns, including water and oil aerosols Maximum remaining oil aerosol content: 0.01mg/m 3 or 0.01 ppm(w) at 21°C Standards ISO 8573.1 Supplied with AO or AA grade Filter as appropriate Key Characteristics QUALITY DIRT WATER OIL CLASS Particle size Pressure Dewpoint °C (Including vapour) in μm (ppm. vol) at 7 bar g (100 psi g) mg/m 3 1 0.1 -70 (0.3) 0.01 2 1 -40 (16) 0.1 3 5 -20 (128) 1.0 4 15 +3 (940) 5 5 40 +7 (1240) 25 6 - +10 (1500) -

Product Detail

New items

P32KA00ESE, Parker

Filter Elements Replacement Filters for Parkers P32 range of coalescing, adsorber and particlulate filters. P32 Series - Next Generation

Product Detail

New items

AF40P-060S, SMC

Replacement Elements – AF Filters / AW Filter Regulators A selection of replacement filter elements for use with the AF air filters and AW filter regulators. The non-woven fabric is capable of removing particles down to 5 micron. Replacement filter element for series AF/AW Non-woven fabric 5μm filtration rating AF Series Replacement Parts and Accessories A selection of elements designed to be used with the AF20-40 series micro mist separators.

Product Detail

New items

AM-EL250, SMC

SMC Micro Mist and Super Mist Elements A selection of replacements elements from the SMC, suitable for use with AM, AMD, AME and the AMF separator series. Filters, Lubricators and Separators High flow capacity filters, lubricators and separators with polycarbonate bowls. All have an ambient and media temperature range of 5 - 60°C and a proof pressure of 15 bar.

Product Detail

New items

K009AA, Domnick Hunter

General Purpose/High Efficiency Filter G 1/4 - G1 Grade AO/AA Oil-X Plus Series Main airline filtration for pipe sizes 1/4 in to 1in Suitable for all types of compressor Compatible with all compressor oils Complete with high efficiency general purpose element (grade AO) or high efficiency oil removal element (grade AA) Operating temperature range +1.5°C to +66°C Corrosion protected inside and out with Alocram treatment and epoxy paint finish Key Characteristics QUALITY DIRT WATER OIL CLASS Particle size Pressure Dewpoint °C (Including vapour) in μm (ppm. vol) at 7 bar g (100 psi g) mg/m 3 1 0.1 -70 (0.3) 0.01 2 1 -40 (16) 0.1 3 5 -20 (128) 1.0 4 15 +3 (940) 5 5 40 +7 (1240) 25 6 - +10 (1500) -

Product Detail

New Items

P31KA00ESE, Parker

AMH-EL150, SMC

AFM40P-060AS, SMC

LFP-D-MAXI-5M, Festo

MS4/D-MINI-LFM-B, Festo

MS6-LFM-B, Festo

MS6-LFP1-C, Festo

010AA, Domnick Hunter

P32KA00ESE, Parker

AF40P-060S, SMC

AM-EL250, SMC

K009AA, Domnick Hunter

FAQs