Pneumatic Gripper | Pneumatic Drill

New items

MHS3-16D, SMC

MHS Series Three and Four Finger Precision The MHS series parallel style air grippers have been designed for applications requiring a high degree of accuracy in a wide range of environments. They use a wedge cam mechanism for the finger action giving high accuracy. The grippers are a compact, lightweight design with a reduced height and easy mounting alignment. Light and compact Auto switch capable Can be mounted from two directions High repeatability:± 0.01 mm Technical specification Cylinder bore 20 mm Lubrication Non-lubricated Fluid Air Action Double-acting Operating pressure 2 to 6 bar Pressure 0·5MPa (5·1kgf/cm 2 ) (2·5) Ambient & fluid temp -10°C to +60°C Closing diameter (mm) 12 Repeatability ±0·01 Opening diameter (mm) 16 Max. operating frequency 60cpm Weight g 100

Product Detail

New items

MHF2-8D, SMC

MHF2 Low Profile Air Gripper The MHF two finger pneumatic gripper compact design reduces bending moment, improves positional accuracy and saves space. Its double piston gripper construction provides a powerful griping force while remain compact and mounting flexibility is achieved by removing the need for brackets. Auto-switches can be mounted on either side using channels in the body. Double-acting Non lubricated

Product Detail

New items

DHPS-16-A, Festo

The Festo parallel gripper DHPS-16-A has double-acting function and plain-bearing guide. It has single-acting or with gripping force backup. Size 16 Stroke per gripper jaw 5 mm Max. replacement accuracy <= 0,2 mm Max. angular gripper jaw backlash axial< 0,5 deg Max. gripper jaw backlash Sz< 0,02 mm

Product Detail

New items

DHPS-10-A, Festo

The Festo The Festo parallel gripper DHPS-10-A has double-acting function and plain-bearing guide. It has single-acting or with gripping force backup. Size 10 Stroke per gripper jaw 3 mm Max. replacement accuracy <= 0,2 mm Max. angular gripper jaw backlash axial < 0,5 deg Max. gripper jaw backlash Sz < 0,02 mm

Product Detail

New items

MHC2-16S, SMC

Grippers Double acting Operating pressure 1 – 6 bar Temperature range 0°C to 60°C Opening angle 30°(open), 10°(closed) Holding moment at 5 bar is 0.1Nm (10mm bore), 0.4Nm (16mm), 0.7Nm (20mm), 1.4Nm (25mm) Repeatability of closing position ±0.01mm Maximum operating frequency 180cpm Lubrication not required

Product Detail

New items

MHZ2-20C, SMC

Standard parallel type air gripper Bore sizes from 10mm to 40mm Double acting and Single acting available Auto switch capable Improved rigidity of guide rail

Product Detail

New items

MHZJ2-16D, SMC

Parallel air gripper with dust cover Bore sizes from 6mm to 25mm available Double acting or Single acting available Three dust cover types available Auto switch capable

Product Detail

New items

DHPS-35-A, Festo

The Festo parallel gripper DHPS-35-A has double-acting function and plain-bearing guide. It has single-acting or with gripping force backup. Size=35 Stroke per gripper jaw=12,5 mm Max. replacement accuracy=<= 0,2 mm Max. angular gripper jaw backlash axial=< 0,5 deg Max. gripper jaw backlash Sz=< 0,02 mm

Product Detail

New items

DHRS-16-A, Festo

The Festo radial gripper DHRS-16-A indicated opening and closing times [Ms] were measured at room temperature at an operating pressure of 6 bar with the gripper horizontally mounted and without additional gripper fingers (mean values shown). The grippers must be throttled for greater applied loads. Opening and closing times must then be adjusted accordingly. Size=16 Max. replacement accuracy=<= 0,2 mm Max. opening angle=180 deg Rotationally symmetrical=<= 0,2 mm Repetition accuracy, gripper=<= 0,1 mm

Product Detail

New items

MHF2-16D, SMC

MHF2 Low Profile Air Gripper The MHF two finger pneumatic gripper compact design reduces bending moment, improves positional accuracy and saves space. Its double piston gripper construction provides a powerful griping force while remain compact and mounting flexibility is achieved by removing the need for brackets. Auto-switches can be mounted on either side using channels in the body. Double-acting Non lubricated

Product Detail

New items

MHF2-20D, SMC

MHF2 Low Profile Air Gripper The MHF two finger pneumatic gripper compact design reduces bending moment, improves positional accuracy and saves space. Its double piston gripper construction provides a powerful griping force while remain compact and mounting flexibility is achieved by removing the need for brackets. Auto-switches can be mounted on either side using channels in the body. Double-acting Non lubricated

Product Detail

New items

MHZL2-25D, SMC

MHZL2 Series Air Gripper The MHZL2 is a long stroke/ parallel style air gripper. The air gripper can be mounted in various positions and different finger positions can be selected. No lubrication required Solid state auto switch

Product Detail

Pneumatic Grippers

New Items

MHS3-16D, SMC

MHF2-8D, SMC

DHPS-16-A, Festo

DHPS-10-A, Festo

MHC2-16S, SMC

MHZ2-20C, SMC

MHZJ2-16D, SMC

DHPS-35-A, Festo

DHRS-16-A, Festo

MHF2-16D, SMC

MHF2-20D, SMC

MHZL2-25D, SMC

FAQs