Pneumatic Rodless Cylinders

New items

MY1B25TFG-800Z, SMC

MY1B-Z Basic Rodless Cylinder Double acting mechanically jointed rodless cylinder with air cushioning and a magnetic piston as standard. The MY1b-Z provides a simple, compact, reliable method for positioning or moving components and finished parts. These rodless actuators are suitable for a diverse range of applications including assembly automation, packaging lines and electronics production. SMCs revised MY1B range offers a number of benefits over the original design Compact design Up to 17% lighter than previous model Auto-switches can be mounted in any position Piping can be connected from 4 directions Cushion needle easy to adjust using hexagon wrench Side supported to prevent cylinder tube deflecting at longer strokes. New dust seals use magnetic attraction to improve retention and service life. Floating bracket connection for easier installation

Product Detail

New items

OSP-P40-00000-00800, Parker Origa

Hoerbiger OSP-P 16-40mm Diameter Cylinder Double acting with adjustable cushioning Lightweight, rigid construction High load carrying capacity End caps can be rotated to any one of 4 positions at 90° intervals providing optimum port positioning Standard magnetic piston Medium Compressed air, filtered, non lubricated Operating pressure range 8 bar max. Ambient temperature range -10°C to +80°C Barrel profile Anodised aluminium End caps Aluminium, lacquered Carriage Anodised aluminium Sealing Stainless steel Seals NBR Note Outward and Return Thrust values stated at 6 bar.

Product Detail

New items

OSP-P32-00000-00500, Parker Origa

Hoerbiger OSP-P 16-40mm Diameter Cylinder Double acting with adjustable cushioning Lightweight, rigid construction High load carrying capacity End caps can be rotated to any one of 4 positions at 90° intervals providing optimum port positioning Standard magnetic piston Medium Compressed air, filtered, non lubricated Operating pressure range 8 bar max. Ambient temperature range -10°C to +80°C Barrel profile Anodised aluminium End caps Aluminium, lacquered Carriage Anodised aluminium Sealing Stainless steel Seals NBR Note Outward and Return Thrust values stated at 6 bar.

Product Detail

New items

CY3B20TF-250, SMC

The SMC CY3B rodless cylinder magnetically coupled uses industrial strength magnet located in the piston and external carriage to form a single unit that will travel when actuated with air pressure. The CY3B series has resin based lube retainers installed on the dust seal to more evenly distribute lubricant for a reduction in minimum operating pressure. It has 70% longer wear rings will distribute a side load over a larger contact area for improved bearing performance. Rubber bumper on both ends Piston peed 50 to 500 mm/sec

Product Detail

New items

MY1B16G-250, SMC

MY1B Basic Rodless Cylinder Basic mechanically coupled rodless cylinder with hard anodized aluminium body. Double acting with magnetic piston as standard. Simple space saving design. Magnetic Sensing Space saving design Common port location Adjustable shock absorber Modular accessories available Thrust calculated at 5 bar

Product Detail

New items

MY1B25TFG-600Z, SMC

MY1B-Z Basic Rodless Cylinder Double acting mechanically jointed rodless cylinder with air cushioning and a magnetic piston as standard. The MY1b-Z provides a simple, compact, reliable method for positioning or moving components and finished parts. These rodless actuators are suitable for a diverse range of applications including assembly automation, packaging lines and electronics production. SMCs revised MY1B range offers a number of benefits over the original design Compact design Up to 17% lighter than previous model Auto-switches can be mounted in any position Piping can be connected from 4 directions Cushion needle easy to adjust using hexagon wrench Side supported to prevent cylinder tube deflecting at longer strokes. New dust seals use magnetic attraction to improve retention and service life. Floating bracket connection for easier installation

Product Detail

New items

MY1B32TFG-600Z, SMC

MY1B-Z Basic Rodless Cylinder Double acting mechanically jointed rodless cylinder with air cushioning and a magnetic piston as standard. The MY1b-Z provides a simple, compact, reliable method for positioning or moving components and finished parts. These rodless actuators are suitable for a diverse range of applications including assembly automation, packaging lines and electronics production. SMCs revised MY1B range offers a number of benefits over the original design Compact design Up to 17% lighter than previous model Auto-switches can be mounted in any position Piping can be connected from 4 directions Cushion needle easy to adjust using hexagon wrench Side supported to prevent cylinder tube deflecting at longer strokes. New dust seals use magnetic attraction to improve retention and service life. Floating bracket connection for easier installation

Product Detail

New items

CY3B25TF-500, SMC

The SMC CY3B rodless cylinder magnetically coupled uses industrial strength magnet located in the piston and external carriage to form a single unit that will travel when actuated with air pressure. The CY3B series has resin based lube retainers installed on the dust seal to more evenly distribute lubricant for a reduction in minimum operating pressure. It has 70% longer wear rings will distribute a side load over a larger contact area for improved bearing performance. Minimum operating pressure 0.12 to 0.16 MPa Speed 50 to 500 mm/sec

Product Detail

New items

M/146032/M/2000, IMI Norgren

The IMI Norgren rodless cylinder has new lightweight design extrusion with universal mounting grooves. It has proven and patented sealing system. Dust protection as standard Interchangeability with series M/46000

Product Detail

New items

A44040AABAA/1000, Norgren

Cylinders New compact, space-saving design Proven sealing system Double-acting operation with buffer cushioning Integral switch mounting Standard foot mountings included with cylinders Key Characteristics Cylinder Ø (mm) Theoretical force at 6 bar (N) Air consumption per stroke at 6 bar (l/cm) Cushion length (mm) 25 250 0.035 18 32 410 0.056 23 40 640 0.088 35 Medium Compressed air, filtered, lubricated or non-lubricated Connection ports G1/8 (25 & 32mm cylinders) G1/4 (40mm cylinder) Operating Pressure 1-8 bar Ambient Temperature -30°C to +80°C max. (Consult our Technical Service for use below +2°C ) Materials Barrel Anodised aluminium alloy End covers Zinc plated steel/aluminium Yoke & pistons Anodised aluminium alloy Cover Plastic Sealing strip Polyurethane Cover strip Polyamide Seals Nitrile and polyurethane

Product Detail

New items

MY1B16G-200, SMC

MY1B Basic Rodless Cylinder Basic mechanically coupled rodless cylinder with hard anodized aluminium body. Double acting with magnetic piston as standard. Simple space saving design. Magnetic Sensing Space saving design Common port location Adjustable shock absorber Modular accessories available Thrust calculated at 5 bar

Product Detail

New items

CY1SG15-250Z, SMC

SMC CDY1S 10-15mm Diameter Cylinder Cylinder coupled to piston by magnetic force - no seals needed therefore leakage is eliminated High load capacity Autoswitch available SMC CDY1S 10-15mm Diameter Cylinder Media Air Test pressure 10.5 bar Min. operating pressure 1.8 bar Max. operating pressure 7 bar Ambient & fluid temp. 5-60°C Piston speed * 50-400mm/s Cushion Rubber cushion at both ends Body material Aluminium End cap material Aluminium Lubrication Not required Connection Port Size M5 Mounting Horizontal Mounting nut Standardised for basic type only (2pcs) Retaining Force 10mm bore: 5.5 kgf 15mm bore: 14 kgf Pressure Corresponding to Retaining Force 10mm bore: 7.0 kgf/cm 2 15mm bore: 7.9 kgf/cm 2 *Piston speed not to exceed 300mm/sec, if the switch is mounted at intermediate position of the stroke. Note If magnet retaining force is exceeded by the load, the carriage may uncouple from the internal magnets. In this situation, the carriage should be pushed to the stroke end by hand (or the piston moved via air pressure) to re-couple the carriage and piston.

Product Detail

New Items

MY1B25TFG-800Z, SMC

OSP-P40-00000-00800, Parker Origa

OSP-P32-00000-00500, Parker Origa

CY3B20TF-250, SMC

MY1B16G-250, SMC

MY1B25TFG-600Z, SMC

MY1B32TFG-600Z, SMC

CY3B25TF-500, SMC

M/146032/M/2000, IMI Norgren

A44040AABAA/1000, Norgren

MY1B16G-200, SMC

CY1SG15-250Z, SMC

FAQs