Dc Converters | Dc - Dc Converters

New Items

New items

LSN2-T/6-D12-C, Murata Power Solutions

Murata 6A, 10A & 16A Single Output Regulated Non-Isolated DC-DC Converter - LSN2 Series Very high efficiency Wide input voltage range Non-isolated User-selectable output voltages via external resistors Phased start-up for sequencing and tracking Starts up into pre-biased load Remote On/Off control Remote sense Low output noise and ripple Under voltage lockout, over temperature and continuous short circuit protection UL94V-0 flammability rating DOSA industry standard SIP package & pin out Connection Data Pin 6A types Pin 10A and 16A types 1 V out 1 V out 2 V out trim 2 V out 3 Common 3 +Sense In A VTRACK/Sequence 4 V out B No pin 5 Common 4 V in A No pin 5 Remote On/Off 6 Common 7 Vin 8 Vin B VTRACK/Sequence 9 V out trim 10 Remote On/Off Note No derating up to 63ºC, with derating up to +85ºC. Standards UL/cUL 60950-1, CSA-C22.2 No.234, IEC/EN 60950-1

Product Detail

New items

R-78T5.0-1.0/AC, Recom

R-78Txx 1.0 Series Single Output DC/DC Converter The Recom R-78T series of DC-DC converters are compact, low profile SMD switching regulators. They have 3 standard pinning options: AC, AL and FC. The R-78T series has a high efficiency of up to 95%, which means that these DC-DC converters do not require heatsinks or fans. The switching regulator can operate reliably between -40°C and 85°C without derating. These DC-DC converters are the ideal space-saving solution for portable battery-operated applications. Efficiency up to 95% No need for heatsinks Industry standard Pin-out 1.5A start-up overload capacity Wide input range 7V-42V Operating temperature range -40°C to 85°C Short circuit protection 350kHz fixed switching frequency, shielded magnetics Low profile Low cost

Product Detail

New items

R-78T5.0-1.0/AL, Recom

Product Detail

New items

YEV09T06-0G, BEL POWER SOLUTIONS INC

Power-One 3A, 6A & 10A Single Output Regulated Non-Isolated DC-DC Converter - YEV Series Non-isolated High efficiency synchronous buck topology Low noise fixed frequency operation Wide input voltage range Adjustable output voltage via external resistors Start up into pre-biased output No minimum load required Power enable Input under-voltage lockout, over-current and over-voltage protection Vertical through-hole mounting package - industry standard footprint and pinout Connection Data Pin Function 1 Enable 2 Vin 3 Power Ground 4 Vout 5 Trim Note Please refer to data sheet for derating graphs. MTBF to Telcordia SR-332. Approvals UL/cUL recognised, CSA, TUV Standards UL 60950, EN 60950-1, CSA C22.2 No. 60950-00 Certified Power-One - Non-Isolated, Analogue Point-of-Load Converters

Product Detail

Non-Isolated DC-DC Converters

New Items

LSN2-T/6-D12-C, Murata Power Solutions

R-78T5.0-1.0/AC, Recom

R-78T5.0-1.0/AL, Recom

YEV09T06-0G, BEL POWER SOLUTIONS INC

FAQs