Switching Power Supplies

New items

RAC48-24S/OF, Recom

Recom 48W, Open Frame,Switch Mode AC-DC Converter, RAC48 Series The Recom RAC48/OF series of open frame AC-DC converters have a universal AC input of 90-265Vac and trimmable DC outputs to compensate for voltage drops on the output connections. The DC outputs of these open frame class II power supplies are also fully protected. The RAC48/OF series of regulated converters are CB, UL, CE certified and ErP conform. Applications of these switch mode power supplies include industry controls, test and measurements systems and energy efficient products. 48W open frame AC-DC class II power supply Universal input voltage range Compact 4 x 2 inches size 3kVac isolation Over current, over power and short circuit protections Standby power ErP conform (˂0.5W) Approvals CB, UL, CE Standards UL-60950-1 2nd, EN-60950-1 2nd

Product Detail

New items

LEP100F-36, Cosel

Cosel LEP Series, Open Frame, 100-240W The LEP series of switch mode power supplies (SMPS) from Cosel are high power with a high peak power capability. This series features a universal input of 85 vac to 264 vac, making them a versatile solution. Features and Benefits: EMI-FCC Class B Power factor correction Harmonic attenuator Optional remote ON/OFF Overcurrent, overvoltage, peak current and thermal protection are built in Product Applications: Designed for equipment where high peak power is required, these power supplies are suitable for application in motors, faxes, printers and medical equipment. Standards UL60950-1, C-UL(CSA60950-1), EN60950-1, EN60065, EN50178 Complies with DEN-AN and IEC60950-1 (At only AC input) Conducted noise complies with FCC-B, CISPR22-B, EN55022-B, VCCI-B Harmonic attenuator complies with IEC6100-3-2 Switch Mode Cosel Open Frame

Product Detail

New items

TXL 025-48S, TRACOPOWER

15W to 600W, Universal Input, Single/Multi Output, TXL Series The TRACOPOWER TXL series is a family of encased power supplies, designed for a wide range of cost critical industrial applications. Wit a low profile metal case and screw terminal block connection they are easy to install in any equipment. These power supplies have Universal Input 85-240VAC and comply also with European EMC standards and the Low Voltage Directive (LVD). The high quality of this product is supported by a 3 year warranty. Wide range universal input Compact design, metal case Easy installation - screw terminals Short circuit and overvoltage protection Power factor correction to EN 61000-3-2 (PFC) EMI/EMC complies to EN 50081-1 and EN 50082-1

Product Detail

New items

CNS653-ME, Artesyn Embedded Technologies

AC/DC CONVERTER 12V 650W

Product Detail

New items

LPS365-M, Artesyn Embedded Technologies

AC/DC CONVERTER 24V 240W

Product Detail

New items

MSP-600-36, Mean Well

Mean Well MSP-600 Series 600W AC-DC Enclosed Switch Mode Medical Power Supply MSP-600 Series 600W AC-DC enclosed switch mode medical power supply with universal full range Vac input a high efficiency of up to 89%, forced air cooling via built-in long life DC fan, built-in active PFC function, low no load current consumption and a low profile design. These MSP-600 series 600W AC-DC enclosed switch mode power supplies have a low leakage current of 300μA at 264Vac and are medically approved to IEC60601-1 as well as complying with international medical safety regulations (MOOP level). Typical applications for these 600W medical power supplies include medical equipment, chemical and biological detection equipment, analysis facilities and other applications that require a low no load power consumption. Universal AC input / Full range Built-in active PFC function: PF>0.94 Medically approved to IEC60601-1 High efficiency of up to 89% Withstand 300VAC surge input for 5 seconds Low no load power consumption of Built-in remote sense function Built-in cooling fan ON/OFF control DC OK signal Short circuit, overload, over voltage and over temperature protection Approvals cULus, CB, CE Standards ANSI/AAMI ES60601-1, IEC60601-1 Switch Mode - Mean Well Medical Enclosed AC/DC Power Supplies

Product Detail

New items

6EP1967-2AA00, Siemens

SITOP Accessories Mounting Bracket Combining a SITOP power supply and a 90° mounting bracket results in a minimum surface area requirement on the rear panel of the control cabinet. The width of the power supply becomes the depth, and the depth becomes the width. The mounting bracket is suitable for control cabinets with a depth of 320 mm or more. Mounting Adapter for Standard Mounting Rail The single phase 6ES7305-1BA80-0AA0 and 6ES7307-1EA80-0AA0 PSUs are special mechanical versions for SIMATIC S7-300 and can be mounted on S7 rails. A mounting adapter (6ES7390-6BA00-0AA0) for mounting on the standard mounting rail EN 60715 35 x 15 is separately available as an accessory. The 6ES7307-1BA01-0AA0, 6ES7307-1EA01-0AA0 and 6ES7307-1KA02-0AA0 PSUs are variants for SIMATIC S7-300 and can be mounted on S7 rails. A mounting adapter (6EP1971-1BA00) for installation on DIN Rail EN 60715 35 ´ 15/7.5 is separately available as an accessory. Connection Plug for Devices with Degrees of Protection IP65 and IP67 For the maintenance free SITOP UPS500P DC UPS modules (6EP1933-2NC01, 6EP1933-2NC11) in IP65 degree of protection. A connector set (6EP1975-2ES00) for input and output and with a pre-assembled USB cable (2 m long) is available as an accessory. Device Labels Blank device labelling plates (20 x 7 mm, pastel turquoise) with 3RT1 900-1SB20 can be used for identification of the power supplies. The package unit comprises 340 labels on frames, 20 labels per frame. For usability, refer to "Accessories" in the technical data of the respective power supplies.

Product Detail

New items

TML 20124, TRACOPOWER

Traco 14.9W to 40W, PCB/Chassis Mount, Encapsulated, Switch Mode AC-DC Power Supply - TML Series Ultra compact fully encapsulated power supplies with increased power density PCB mount with solder pins or chassis mount with screw terminals EMI meets EN 55022, class B and FCC, level B Safety Class I (Class II, TML40 models only) Short circuit and overload protection Note Chassis mounting types available, see Manufacturer Part numbers with a 'C' suffix. Power derating above 50°C is 3% per °C. MTBF to MIL-HDBK-217F (25°C). Approvals UL Recognised Component for Canada & US Standards UL 60950-1, IEC 60950-1, EN 60950-1

Product Detail

New items

TXL 035-0524D, TRACOPOWER

15W to 600W, Universal Input, Single/Multi Output, TXL Series The TRACOPOWER TXL series is a family of encased power supplies, designed for a wide range of cost critical industrial applications. Wit a low profile metal case and screw terminal block connection they are easy to install in any equipment. These power supplies have Universal Input 85-240VAC and comply also with European EMC standards and the Low Voltage Directive (LVD). The high quality of this product is supported by a 3 year warranty. Wide range universal input Compact design, metal case Easy installation - screw terminals Short circuit and overvoltage protection Power factor correction to EN 61000-3-2 (PFC) EMI/EMC complies to EN 50081-1 and EN 50082-1 Note De-rating 2% per °C above 45°C (2.5% per °C for TXL220 types). TXL 120 series is not recommended for new designs, please refer to TXL 100 series for suitable alternatives Approvals UL, cUL, CB report Caution Total power must not exceed specified max. output power for Multi Output models Standards UL 60950-1, IEC 60950-1, EN 60950-1 2nd edition

Product Detail

New items

TML 40124, TRACOPOWER

Traco 14.9W to 40W, PCB/Chassis Mount, Encapsulated, Switch Mode AC-DC Power Supply - TML Series Ultra compact fully encapsulated power supplies with increased power density PCB mount with solder pins or chassis mount with screw terminals EMI meets EN 55022, class B and FCC, level B Safety Class I (Class II, TML40 models only) Short circuit and overload protection Note Chassis mounting types available, see Manufacturer Part numbers with a 'C' suffix. Power derating above 50°C is 3% per °C. MTBF to MIL-HDBK-217F (25°C). Approvals UL Recognised Component for Canada & US Standards UL 60950-1, IEC 60950-1, EN 60950-1

Product Detail

New items

MINT1180A2475K01, SL POWER CONDOR

Switch Mode, Single Output, Medical Power Supply, MINT1180A Series The SL Power Electronics MINT1180 family is a series of single output, medical open-frame AC/DC power supplies. These switch mode power supplies come in a size of 3 x 5 x 1.3 inches, the MINT1180 provides 180W convection cooled, with up to 88% efficiency. The MINT1180 power supplies operate at universal input range of 90 to 264Vac. The power supplies are fully protected against short circuit, overload and overvoltage. The MINT1180 series of switching power supplies are ideal for home care applications where the use of fans is not desired. Small package 180W Convection Cooled Power Ideal for 1U Applications Universal Input 90-264Vac Efficiency 90% typical RoHS Compliant Approvals CSA/EN/IEC/UL Standards CSA/EN/IEC/UL60601-1, 3rd Edition, 2 x MOPP Isolation CSA/EN/IEC/UL60950-1 2nd Edition Switch Mode - SL Power

Product Detail

New items

116-010066F, Eplax

30, 60 & 120W Selectable Input, Single/Multi Output, PK Series Switch mode Euro-modular power supplies for use in 19in subracks to DIN 41494 Switchable input Voltage In-built EMI filter to VDE level B Adjustable output voltage ±10% Short circuit protection Overvoltage protection Approvals UL

Product Detail

New Items

RAC48-24S/OF, Recom

LEP100F-36, Cosel

TXL 025-48S, TRACOPOWER

CNS653-ME, Artesyn Embedded Technologies

LPS365-M, Artesyn Embedded Technologies

MSP-600-36, Mean Well

6EP1967-2AA00, Siemens

TML 20124, TRACOPOWER

TXL 035-0524D, TRACOPOWER

TML 40124, TRACOPOWER

MINT1180A2475K01, SL POWER CONDOR

116-010066F, Eplax

FAQs