FPGA Development Tools

New items

410-183, Digilent

Basys 3 Artix-7 FPGA Trainer Board The Basys 3 is an entry-level FPGA development board designed for the Vivado Design Suite, featuring Xilinx Artix-7 architecture. Vivado Design Suite WebPACK edition can be downloaded for free from Xilinx. Expanded features are available through purchase of the Design Edition. Xilinx Artix-7 FPGA (XC7A35T-1CPG236C) 33280 logic cells in 5200 slices (each slice contains 4 x 6-input LUTs and 8 x flip-flops) 1800Kbit Fast Block RAM 5 x Clock Management Tiles, each with a phase-locked loop (PLL) 90 x DSP slices Internal clock speeds exceeding 450MHz On-chip Analogue-to-Digital Converter (XADC) On-board 32Mbit Quad-SPI Serial Flash memory Programmable over JTAG, Quad-SPI or USB USB-UART Bridge via microUSB socket USB-A HID Host socket for mice, keyboards and memory sticks 12-bit VGA display output on DE15 connector FPGA Programming-Done LED 16 x User LEDs 4-digit 7-segment LED display 5 x User Pushbuttons 16 x User Slide-Switches 3 x Standard Pmod 2 x 6-pin connectors Dual purpose XADC signal / Standard Pmod 2 x 6-pin connector Powered from either USB socket or external +5V header An FPGA is a semiconductor device consisting of a matrix of Configurable Logic Blocks (CLBs) connected through programmable interconnects. The user determines these interconnections by programming SRAM. A CLB can be simple (AND, OR gates, etc) or complex (a block of RAM). The FPGA allows changes to be made to a design even after the device is soldered into a PCB.

Product Detail

New items

471-036-2, Digilent

The Digilent The Eclipse Z7 Zynq-7000 SoC development board with SYZYGY-compatible expansion is Digilent's newest FPGA/SoC designed to enable systems that are ultra high-speed and highly modular, featuring Xilinx's Zynq-7000 PSoC. Zynq, plus the Zmod expansions and Digilent's new software architecture results in a powerful research and prototyping platform optimized for productivity and accelerated design flow, making it the perfect product for instrumentation applications such as software defined radio, ultrasound, medical technology, and much more. MicroSD card slot Power jack

Product Detail

New items

6003-410-018, Digilent

The PYNQ-Z1 board is designed to be used with PYNQ, a new open-source framework that enables embedded programmers to exploit the capabilities of Xilinx Zynq All Programmable SoCs (APSoCs) without having to design programmable logic circuits. Instead the APSoC is programmed using Python, with the code developed and tested directly on the PYNQ-Z1. The programmable logic circuits are imported as hardware libraries and programmed through their APIs in essentially the same way that the software libraries are imported and programmed.

Product Detail

New items

410-292 Nexys A7-100T, Digilent

Nexys 4 DDR Artix-7 FPGA Trainer Board The Nexys 4 is an FPGA development board designed for the educational market, featuring Xilinx Artix-7 architecture. The Nexys 4 DDR is compatible with the high-performance Vivado Design Suite as well as the ISE® toolset, which includes ChipScope™ and EDK. WebPACK editions of these toolsets can be downloaded for free from Xilinx. Expanded features are available through purchase of the Design Edition. Xilinx Artix-7 FPGA (XC7A100T-1CSG324C) Features 101440 logic cells in 15850 slices (each slice contains 4 x 6-input LUTs and 8 x flip-flops) 4860Kbit Fast Block RAM 6 x Clock Management Tiles, each with a phase-locked loop (PLL) 240 x DSP slices Internal clock speeds exceeding 450MHz On-chip Analogue-to-Digital Converter (XADC) Nexys 4 DDR Board Features MT47H64M16HR-25 128MiB DDR2 SDRAM S25FL128S 16MiB Quad-SPI Serial Flash memory ADXL362 SPI bus 3-axis accelerometer ADT7420 I²C bus temperature sensor ADMP421 MEMS microphone with PDM output Programmable over JTAG, Quad-SPI or USB FPGA Programming-Done LED 2 x 4-digit 7-segment LED displays 16 x User LEDs 2 x User RGB LEDs 5 x User Pushbuttons 16 x User Slide-Switches USB-UART Bridge via microUSB socket USB-A HID Host socket for mice, keyboards and memory sticks 12-bit VGA display output on DE15 connector RJ45 socket for 10/100 Ethernet connection 3.5mm jack socket for mono audio output microSD card slot 4 x Standard Pmod™ 2 x 6-pin connectors Analogue XADC Pmod™ 2 x 6-pin connector Powered from either USB, barrel jack socket or external battery pack Supplied with Hardshell plastic case with protective foam, USB cable An FPGA i...

Product Detail

New items

410-328-35, Digilent

Cmod A7 Artix-7 FPGA DIP Module The Digilent Cmod A7 is a small 48-pin DIP form factor development board built around a Xilinx Artix-7 FPGA. Ideal for use with solderless breadboards. Xilinx Artix-7 FPGA (XC7A35T-1CPG236C) 33280 logic cells in 5200 slices (each slice contains 4 x 6-input LUTs and 8 x flip-flops) 1800Kbit Fast Block RAM 5 x Clock Management Tiles, each with a phase-locked loop (PLL) 90 x DSP slices Internal clock speeds exceeding 450MHz On-board IS61WV5128BLL-10BLI 512KB SRAM On-board N25Q032A 4MB Quad-SPI Flash memory MicroUSB connector USB-JTAG Programming Circuit On-board FT2232HQ USB-UART Bridge 2 x User LEDs User RGB LED 2 x User Pushbuttons 48-pin DIP connector with 44 x GPIO and 2 x Analogue inputs Standard Pmod 2 x 6-pin connector Power supply: USB or external +3.3V to +5.5Vdc connected to DIP pins An FPGA is a semiconductor device consisting of a matrix of Configurable Logic Blocks (CLBs) connected through programmable interconnects. The user determines these interconnections by programming SRAM. A CLB can be simple (AND, OR gates, etc) or complex (a block of RAM). The FPGA allows changes to be made to a design even after the device is soldered into a PCB.

Product Detail

New items

410-376, Digilent

Product Detail

New items

410-319, Digilent

Arty Artix-7 FPGA Development Board Arty is a development platform designed around the Artix-7™ Field Programmable Gate Array (FPGA) from Xilinx. Arty was designed specifically for use as a MicroBlaze Soft Processing System. Xilinx Artix-7 FPGA (XC7A35T-1CSG324-1L) 33280 logic cells in 5200 slices (each slice contains 4 x 6-input LUTs and 8 x flip-flops) 1800Kbit Fast Block RAM 5 x Clock Management Tiles, each with a phase-locked loop (PLL) 90 x DSP slices Internal clock speeds exceeding 450MHz On-chip Analogue-to-Digital Converter (XADC) Programmable over JTAG and Quad-SPI Flash Board Memory and Power 256MB DDR3L SDRAM with 16-bit bus @ 667MHz 16MB Quad-SPI Flash memory USB-JTAG Programming circuit Powered from USB connector or +7V to +15Vdc barrel jack socket System Connectivity 10/100 Ethernet via RJ45 connector USB-UART Bridge via microUSB socket Switches and LEDs 4 x User Slide-Switches 4 x User Pushbuttons Reset Pushbutton Status LEDs: Power-on, FPGA programming status and USB/Ethernet port status 4 x User LEDs 4 x User RGB LEDs Expansion Connectors 2 x Standard Pmod™ 2 x 6-pin connectors 2 x High-Speed Pmod™ 2 x 6-pin connectors chipKIT/Arduino R3 Shield headers Note An adapter Shield allowing up to five more Pmod™ peripheral modules to be interfaced is available: RS 136-8283 Software Voucher Code is provided on the product packaging An FPGA is a semiconductor device consisting of a matrix of Configurable Logic Blocks (CLBs) connected through programmable interconnects. The user determines these interconnections by programming SRAM. A CLB can be simple (AND, OR gates, etc) or complex (a block of RAM). The FPGA allows changes to be made to a design even after the device is soldered into a PCB.

Product Detail

New items

471-014, Digilent

The Zybo Z7 is a feature-rich, ready-to-use embedded software and digital circuit development board built around the Xilinx Zynq-7000 family. This is the second generation update to the popular Zybo that was released in 2012. The Zynq family is based on the Xilinx All Programmable System-on-Chip (AP SoC) architecture, which tightly integrates a dual-core ARM Cortex-A9 processor with Xilinx 7-series Field Programmable Gate Array (FPGA) logic. The Zybo Z7 surrounds the Zynq with a rich set of multimedia and connectivity peripherals to create a formidable single-board computer, even before considering the flexibility and power added by the FPGA.

Product Detail

New items

DK-DEV-5M570ZN, Altera

MAX V CPLD Development Kit The Altera MAX V CPLD Development Kit is a complete design environment that includes both the hardware and software you need to prototype the most common CPLD applications, including I/O expansion, interface bridging, power management control, initialization control, and analogue interface control. Measure CPLD power (V CCINT and V CCIO ) Bridge between two different I/O voltages (adjustable V CCIO on CPLD Bank 2) Interface to external functions or devices via four connectors Read and write to memories 8Kbit user Flash memory (UFM) available within the 5M570Z CPLD I²C or SPI EEPROMs (user installed) Come up to speed quickly with your CPLD design by reusing the example designs provided Re-use the kits PCB board and schematic as a model for your design Embedded USB-Blaster circuitry for CPLD configuration User LEDs, push-buttons, and capacitor sense button Standard PC speaker header Two DC motor headers GPIO connectors to mate with daughtercards Supplied with USB cable, license-free Quartus® II Web Edition software

Product Detail

New items

410-393, Digilent

The Eclypse Z7 is Digilent's newest FPGA/SoC designed to enable systems that are ultra high-speed and highly modular, featuring a Xilinx Zynq®-7000 SoC family device. Zynq, plus the Zmod expansions and Digilent's new software architecture results in a powerful research and prototyping platform optimized for productivity and accelerated design flow, making it the perfect product for instrumentation applications such as software defined radio, ultrasound, medical technology, and much more. As a host board for Zmods, the open-source SYZYGY-compliant expansion modules, Eclypse Z7 is designed to be highly flexible without the overhead of starting designs from scratch. Users can get started with the Eclypse Z7 immediately as Petalinux is supported right out of the box. Pre-built Linux images are accompanied by a software API for bulk data transfer. Digilent offers fully open and customizable hardware designs, Linux images, and Linux software applications. Zynq 7020 SoC667 MHz dual core ARM Cortex-A9 processor13,300 logic slices1GB DDR3L with 32-bit bus @ 1866 MHz2x SYZYGY standard interface connectors for Zmod expansionStandard supports data rates of up to 500 MHz2x Pmod connectors for Pmod expansionMicro USB port for USBUART and JTAG programmingJTAG programming headerProgramming mode select jumper: JTAG, QSPI, SDEthernet connector with 10/100/1000 Ethernet PHYMAC address loaded into QSPI flash during manufacturingMicro USB connector for user USB Host/Device/OTGMicroSD card slotPower jack12V, up to 5A2x user RGB LEDs125 MHz oscillator connected to Zynq PL for PL-only designs2x user buttons

Product Detail

New items

410-370-1, Digilent

Product Detail

New items

410-352, Digilent

The Arty S7 board features new Xilinx Spartan-7 FPGA and is the latest member of the Arty family for Makers and Hobbyists. The Spartan-7 FPGA offers the most size, performance, and cost-conscious design engineered with the latest technologies from Xilinx and is fully compatible with Vivado Design Suite. Putting this FPGA in the Arty form factor provides users with a wide variety of I/O and expansion options. Internal clock speeds exceeding 450MHz On-chip analog-to-digital converter (XADC) Programmable over JTAG and Quad-SPI Flash System Features: USB-JTAG Programming circuitry Powered from USB or any 7V-15V source Expansion Connectors: 4 Pmod connectors Arduino/chipKIT Shield connector Arty S7 Board Spartan-7 FPGA Digilent cardboard packaging with protective foam

Product Detail

New Items

410-183, Digilent

471-036-2, Digilent

6003-410-018, Digilent

410-292 Nexys A7-100T, Digilent

410-328-35, Digilent

410-376, Digilent

410-319, Digilent

471-014, Digilent

DK-DEV-5M570ZN, Altera

410-393, Digilent

410-370-1, Digilent

410-352, Digilent

FAQs