Signal Conditioners

New items

MTL5549Y, MTL

5500 Series IS Interface Units The MTL5500 series is the latest generation of MTL isolators. Incorporating advanced circuit design and innovative isolating transformer construction. The compact 16mm wide design reduces weight and gives a high packing density and reduction in power consumption. They build on the success of the MTL5000 series to bring the benefits of galvanic isolation with exceptional design and reliability.,II (I) GD (Ex ia) IIC,IECEx, ATEX (Baseefa) FM, CSA 3-Port Isolation High Packing density Low power dissipation Multi-channel I/O modules Compatible with preceding MTL5000 series Assessed for Functional safety IEC61508 applications Required EX numbers and information displayed on cover where applicable

Product Detail

New items

1175990000, Weidmuller

SIGNAL CONVERTER/DISCONNECTOR

Product Detail

New items

MTL5546Y, Eaton

Intrinsic Safety Interface Units - Eaton MTL 5500 Series Features and Benefits

Product Detail

New items

BOS S-T01, BALLUFF

Signal adapter for M12 sensors Signal adapter, the smart enhancement for your sensors Various additional functions can be realised effortlessly with the signal adapters. Output signals or counting and timer functions can be changed without additional installations. The signal adapter is plugged in easily between the standardised M12 ports of the sensor and connection lead. It can be configured easily via control wire using teach-in. The signal adapters can also be used as switching amplifiers and can be combined. The following types are available: Counter: configurable counting pulse e.g. every 5th sensor pulse triggers a pulse in the signal adapter Timer: configurable on- or off-delay Frequency monitor: any instance of frequency being exceeded is signalled Inverter: a PNP is inverted into an NPN signal or an NPN is inverted into a PNP signal BOS S-C01 Signal adapter counter PNP BOS S-T01 Signal adapter timer PNP BOS S-F01 Signal adapter inverter PNP to NPN BOS S-F02 Signal adapter inverter NPN to PNP BOS S-M01 Signal adapter frequency monitor PNP

Product Detail

New items

IFMA0065, Red Lion

IFMA - frequency to analogue converter Converts a frequency into a standard signal Galvanic 3-way isolation All sensors are adjustable via DIP switch Easy to mount onto DIN rail Inputs: PNP, NPN, permanent magnet, relay, CMOS or TTL Frequency range: Continuous period measurement: adjustable from 0 → 1 Hz to 0 → 25 kHz Response time: 5 ms + 1 period → 10 s + 1 period Output: Voltage: 0 → 10 VDC or 0 → 5 VDC / 10 mA Current: 0 → 20 mA or 4 → 20 mA INFO LEDs Red LED lights up when output is active Green LED lights up when signals are being received Power supply: 9 → 32 VDC or 85 → 250 VAC Sensor power supply: AC version only: + 12 VDC ±25% max. Accuracy: 0.1% from working area Operating temperature: 0 °C → +50 °C Storage temperature: -40 °C → +80 °C Housing: stable plastic housing Insulation: 2.2 kV between power supply, input and output Dimensions (WxHxD): 28 x 107 x 79 mm

Product Detail

New items

750-923, Wago

JUMPFLEX USB Communication Cable Wago JUMPFLEX USB communication cable connects a PC to the service interface of the 857/2857 series signal conditioners and relay modules or to I/O-SYSTEM buscouplers/controllers. Features and Benefits 2.5 m Length USB 2.0 Wago JUMPFLEX Isolation Amplifiers and Signal Conditioners

Product Detail

New items

1510540000, Weidmuller

ACT20P-CMT-30-AO-RC-S

Product Detail

New items

5131AA, PR Electronics

5131A - 2-wire Programmable Transmitter The 5131A is a 2-wire programmable transmitter. The transmitter is for conversion of linear resistance variation to a standard analog current / voltage signal, for example from solenoids and butterfly valves or linear movements with attached potentiometer. This transmitter can be configured with the software program PReset using a standard PC and the Loop Link communications unit (stock-no. 796-7020 ). 2-wire programmable transmitter 1-channel, stock-no. 827-5491 2-channel, stock-no. 796-6893 Input for RTD, TC, mV, linear resistance, mA, and V sample Linearized, electronic temperature measurement with RTD or TC sensor 4- or 3-wire connection automatic cable compensation or 2-wire connection with programmable cable compensation Current input programmable in range 0-100 mA and voltage inputs in range 0-250 Vdc 4-20 mA loop output, can be configured to any current within 0-20 mA range Voltage output range is selectable between 0-10 Vdc Independent channel jumper selectable inputs for current/voltage or temperature Programming can be performed with or without a power supply 3.75 kVac galvanic isolation between the channels Configurable sensor error detection including NAMUR NE43 DIN rail mounting Temperature Transmitters 4 to 20mA loop powered output and reverse polarity protection, configurable without the need for a PC or software

Product Detail

New items

6185D, PR Electronics

6185 Type - Loop-powered Isolator 6185 type is a 1-, 2- or 4-channel galvanic isolation module. Inputs and outputs are floating and galvanically separated. Elimination of ground loops and measurement of floating signals. Especially useful in applications necessitating an unproblematic transmission of current signals according to NAMUR (sensor error detection). Loop-powered isolator 1-channel version, stock-no. 796-6991 2-channel version, stock-no. 796-6916 4-channel version, stock-no. 796-6948 No separate supply necessary Low response time High noise suppression Powered by the measured signal and loads the loop with max. 1.8 Vdc Input is protected against overvoltage and polarity error Drop voltage for each channel can be calculated according to the following expression: V drop = 1.8 + (I out * R load ) Output is voltage-limited to 15 Vdc DIN rail mounting PR Electronics DIN Rail Mounting

Product Detail

New items

3114, PR Electronics

3100 Type - Isolated Converter 3104, 3109 and 3114 type are for isolation and conversion of standard DC signals. Suitable for galvanic separation of analog DC signals and elimination of ground loops and measurement of floating signals. Conversion of standard DC signals Slimline housing of 6 mm Power supply and signal isolator for 2-wire transmitter Loop supply >17 V DIP-switch configured Inputs and outputs are floating and galvanically separated Isolation 2.5 mm Installation in ATEX Ex zone 2 / IECEx zone 2 / FM division 2 PR Electronics DIN Rail Mounting

Product Detail

New items

9202B1B, PR Electronics

9202B Type - EX Pulse Isolator The 9202B is an Ex pulse isolator for transmission of signals to the safe area from NAMUR sensors and mechanical switches installed in the hazardous area. Ex pulse isolator as a interface for NAMUR sensors and switches Extended self-diagnostics and detection of cable fault Different versions available: - 1-channel, opto-output, stock-no. 796-7051 - 2-channel, opto-output, stock-no. 796-7054 - 1-channel, relay N/O-output, stock-no. 796-7058 - 2-channel, relay N/O-output, stock-no. 796-7067 - 1-channel, relay N/C-output, stock-no. 827-5366 - 2-channel, relay N/C-output, stock-no. 827-5375 Configuration and monitoring by way of detachable display front (PR 4501) Selection of direct or inverted function for each channel via PR 4501 Please order the Display Front PR4501 separately (stock-no. 796-6890 ) Advanced monitoring of internal communication and stored data SIL 2 functionality is optional and must be activated in a menu point Can be mounted in the safe area or in zone 2 / Cl. 1 div. 2 and receive signals from zone 0, 1, 2 and zone 20, 21, 22 including mining / Class I/II/III, Div. 1, Gr. A-G Designed, developed and certified for use in SIL 2 applications according to the requirements of IEC 61508 Monitoring of error events and cable breakage via the individual status relay and/or a collective electronic signal via the power rail Front LED indicates operation status and malfunction 2.6 kVac galvanic isolation between input, output and supply Can be supplied separately or installed on power rail, PR type 9400 DIN rail mounting PR Electronics - Ex Interfaces

Product Detail

New items

9113BA, PR Electronics

9113B Type - Ex Temperature / mA Converter The 9113B is a temperature- and mA converter with 1- or 2-channels. The converter has been designed, developed and certified for use in SIL 2 applications according to the requirements of IEC 61508. Ex temperature / mA converter for input for RTD, TC and mA 1-channel version, stock-no. 796-7045 2-channel version, stock-no. 796-7048 Conversion and scaling of temperature (Pt, Ni and TC) and active current signals TC inputs can use either the internal CJC or a terminal with a built-in Pt100 sensor (PR 5910Ex, channel 1 / PR 5913Ex, channel 2) for higher accuracy Active / passive mA output SIL 2-certified via Full Assessment, the functionality is optional and must be activated in a menu point Configuration and monitoring by way of detachable display front (PR 4501); process calibration and signal simulation Copying of the configuration from one device to others of the same type via the display front Please order the Display Front PR4501 separately (stock-no. 796-6890 ) The device can be mounted in the safe area and in zone 2 / cl. 1 div. 2 and receive signals from zone 0, 1, 2 and zone 20, 21, 22 including M1 / Class I/II/III, Div. 1, Gr. A-G Front LEDs indicate operation status and malfunction 2.6 kVAC galvanic isolation between input, output and supply Can be supplied separately or installed on power rail, PR type 9400 PR Electronics - Ex Interfaces

Product Detail

New Items

MTL5549Y, MTL

1175990000, Weidmuller

MTL5546Y, Eaton

BOS S-T01, BALLUFF

IFMA0065, Red Lion

750-923, Wago

1510540000, Weidmuller

5131AA, PR Electronics

6185D, PR Electronics

3114, PR Electronics

9202B1B, PR Electronics

9113BA, PR Electronics

FAQs