Current Clamps

New items

P01120117, Chauvin Arnoux

The PAC Series is a range of Hall-effect current clamps for measuring direct and alternating currents. 2 forms are proposed to clamp cables up to 30 mm or 2x24 mm in diameter, as well as small busbars. The range comprises PAC1x models and PAC2x models for higher currents. When used with an oscilloscope, this isolated current sensor has 2 sensitivities and allows you to view currents with a bandwidth of up to 30 kHz and peak current up to 600 A DC or peak. It is equipped with a simplified ZeroDC adjustment system and a deactivatable automatic standby function. Rated current: 40 AAC/60 ADC - 400 AAC/600 ADC Output signal: DC and AC voltage Output / input ratio: 10 mV / A, 1 mV / A Output via coaxial cable and isolated BNC male plug

Product Detail

New items

1146B, Keysight Technologies

Keysight Clamp-on Current Probe 1146B The Keysight 1146B ac/dc clamp-on current probe provides accurate display and measurement of currents from 100mA to 100Arms, dc to 100kHz, without breaking into the circuit. A battery level indicator and overload indicator help ensure proper readings. The probe connects directly to a scope through a 2m coaxial cable with an insulated BNC. The 1146B is recomended for use with Keysight scopes: MSO/DSO 2000X; MSO/DSO 3000X; MSO/DSO 4000X; MSO/DSO 6000X; DSO 5000A (100MHz); DSO 5000A (300 - 500MHz); MSO/DSO 6000A (100MHz); MSO/DSO 6000A (300MHz - 1GHz); MSO/DSO 7000A/B (100MHz - 1GHz).

Product Detail

New items

FLUKE I30, Fluke

i30 30A High Resolution, High Bandwidth Current Probe The i30 may be used in conjunction with multimeters, recorders and other suitable recording instruments for accurate non-intrusive ac & dc current measurement.,Applications include: inverters, switch mode power supplies, industrial controllers, automotive leakage currents and other applications requiring accurate isolated current measurement. Hall effect sensing of a.c. and d.c. current Power LED warns of low battery by flashing Zero adjust knob to accommodate offsets 1.5m flying lead terminated with 4mm shrouded plugs Designed to meet EN61010-1, EN61010-2-032 installation CAT III 300V Withstands overloads to 500A Current range 0 to ±30A peak Overall d.c. accuracy ±1% of reading ±2mA Resolution ±1mA Output sensitivity 100mV/A Frequency response (-0.5dB) d.c. to 20kHz Output (load) impedance >100kΩ and ≤100pF Max. conductor size 19mm dia. Battery life 30 hours typical Supplied with Alkaline PP3 battery and operators manual. Warning Use of the probe on uninsulated conductors is limited to 300V ac rms or dc and frequencies below 1 kHz.

Product Detail

New items

i1010, Fluke

Fluke Current Probes Rugged current clamp adaptor suitable for use with multimeters to give non intrusive measurement of d.c. and a.c. current. Integral 1.2m 4mm shrouded plug lead. Jaws accept conductor size of 1 x 30mm or 2 x 25mm dia. d.c. current zero control for nulling out jaw/sensor offset Superior noise immunity allows measurement in electrically noisy environments, such as adjustable speed drive line-side and load currents Shielded, heat-resistant silicon rubber cable connects clamp to digital multimeter Battery check mode Compatible with meter input impedance ≥1MΩ Conforms to IEC 1010-1 Cat III 600V Supplied With: 9V PP3 alkaline battery and operators manual.

Product Detail

New items

ZC15B, Rohde & Schwarz

The Rohde & Schwarz RT-ZC 50MHz current probe precisely measures direct and alternating current without interrupting the power circuit for the measurement. Robust design and easy operation Easy deskewing for simultaneous current and voltage measurements

Product Detail

New items

ZC20B, Rohde & Schwarz

The Rohde & Schwarz RT-ZC 100MHz current probe precisely measures direct and alternating current without interrupting the power circuit for the measurement. Robust design and easy operation Easy deskewing for simultaneous current and voltage measurements

Product Detail

New items

P01120661, Chauvin Arnoux

The Chauvin Arnoux Ampflex Miniflex MA110 single-phase sensors which is 250 mm long, that convert alternating currents ranging from 3 to 3000 A into proportional AC voltages. It has clamping diameter of 70 mm. Excellent linearity and low phase shift Long battery life Deactivatable automatic standby function Power supply by batteries and standard external adapter

Product Detail

New items

P01120631, Chauvin Arnoux

The Chauvin Arnoux AmpFlex series A110 single-phase sensors which is 80 cm long, that convert alternating currents ranging from 3 to 3000 A into proportional AC voltages. It has clamping diameter of 250 mm. Excellent linearity and low phase shift Long battery life Deactivatable automatic standby function Power supply by batteries and standard external adapter

Product Detail

New items

P01120115, Chauvin Arnoux

The Chauvin Arnoux PAC15 is the hall-effect current clamps having clamping diameter of 30 mm. The PAC15 is the essential accessory for multimeters. Simple and effective with its single 1 mV/A sensitivity and direct reading. The PAC15 clamp measures currents up to 400 Aac and 600 Adc, directly on an installation in operation. Deactivatable automatic power-off Extra electrical safety for measurements in the field Double power supply battery & standard external 5 Vdc power pack

Product Detail

New items

P01120415, Chauvin Arnoux

MN Series 200A a.c. Mini Clamps Single and dual range mini clamps with nominal current measuring range of 0.5A to 200A ac 40Hz to 10kHz bandwidth MN09, MN11 & MN21 ac current output 1mA ac / 1A ac for use with multimeters & recorders with a 200mA ac range MN13, MN39 ac voltage output 10mV ac / 1A ac for use with multimeters & recorders with 200mV ac range. MN39 has a dual 20A/200A range with 0.1A ac minimum measurement Conforms to: IEC1010-2-032 (safety standard) 600V Cat III MN89 dc voltage output 100m Vdc / 1Aac for use with multimeters & recorders with mV dc and Vdc inputs, advantageous for multimeters as their mV dc ranges are often more sensitive than their ac current ranges Ergonomic jaw design for measurement where access is difficult and allows 'hooking' onto the cable Fitted with a 1.5m flying lead with 4mm shrouded plugs to suit most multimeters Output voltage limiter prevents high output voltage if clamp output becomes open circuited (MN11 & MN21 only) Ref MN09 MN11 MN13 MN21 MN39 MN89 Nominal range (In) 200Aac Measurement Range (Aac) 0.5 to 240 0.1 to 240 0.1 to 24 0.5 to 240 0.5 to 240 Output type Aac Aac Protect Vac Aac Protect Vac Vdc Output ratio Per 1Aac 1mAac 1mA ac 10mVac 1mAac 100mVac 10mVac 100mVdc Accuracy (@In) 1% 5% 1% 2% Impedance of Measure device 1Ω >1MΩ 1Ω >1MΩ

Product Detail

New items

TCP404XL, Tektronix

TCP 312 / 404XL current probe Bandwidth: 100 MHz (TCP 312), 2 MHz (TCP404XL) Rise time: ≤3.5 ns (TCP 312), ≤175 ns (TCP404XL) Signal delay: 17 ns (TCP 312), 103 ns (TCP404XL) Max ACp-p: 60 A (TCP 312), 1414 A (TCP404XL) Max direct current: 5 A → 1 A/V, 30 A → 10 A/V (TCP 312), 500 A → 1 A/mV (TCP404XL) Current / div range: 1 A/V → 10 A/V (TCP 312), 1 A/mV (TCP404XL) Impedance @ 1 MΩ: 0.08 Ω (TCP 312), 0.1 mΩ (TCP404XL) Max voltage on exposed wire: insulated cable (TCP 312), 600 VRMS CAT I & II - 300 VRMS CAT III (TCP404XL) Cable length: 1.5 m (TCP 312), 8 m (TCP404XL)

Product Detail

New items

Iprober520, Aim-TTi

Aim I-prober 520 PCB Track Positional Current Probe The I-Prober 520 is a unique current measurement device. Measurement of current normally requires it to be passed through a closed magnetic loop, typically using a split clamp device. Whereas this is suitable for individual wires, it is of no use for measuring current in PCB tracks. The I-Prober 520 uses positional H-field measurement. By placing the insulated tip of the probe onto a PCB track, the current flowing in the track can be observed and measured. The I-Prober 520 is supplied with a clip-on toroid assembly which converts it into a closed magnetic circuit probe for measuring current within a wire. Current measurement from isolated probing of conductor Patented Micro Fluxgate Magnetometer technology Wide dynamic range of 10mA to 20A peak to peak Wide bandwidth of DC to 5MHz Low noise equivalent to Designed to meet safety requirements to 300V Cat II Suitable for connection to any 1M input oscilloscope High accuracy general purpose H-field probe Convertible into closed magnetic circuit current probe Technical specification Dynamic Characteristics Bandwidth DC to 5MHz (small signal) Pulse Rise Time Propagation Delay Pulse Aberrations Slew Rate 15A/us (equivalent) Noise (equivalent in toroid) 6mA rms full bandwidth or 1.5mA rms at minimum bandwidth setting Filter Settings Full bandwidth, 500kHz or 2Hz PCB Track Mode Scaling (with control adjusted to suit track width) 1 Amp per Volt for track widths 0.2mm to 3.5mm (0.007 to 0.14) or 2 Amp per Volt for track widths 3mm to 6.5mm (0.125 to 0.25) Wire Mode Using clip-on torroid attachment supplied Current Range ±10mA to ±10A (DC + peak) Accuracy and Linearity ±5% Scaling Factor 1 Amp per output Volt Maximum Wire Diameter 3.5mm (unbroken) or 6mm (end fed) Field Probe Mode Scaling Factor 250μT (or 200A/m) per output Volt Accuracy and L...

Product Detail

New Items

P01120117, Chauvin Arnoux

1146B, Keysight Technologies

FLUKE I30, Fluke

i1010, Fluke

ZC15B, Rohde & Schwarz

ZC20B, Rohde & Schwarz

P01120661, Chauvin Arnoux

P01120631, Chauvin Arnoux

P01120115, Chauvin Arnoux

P01120415, Chauvin Arnoux

TCP404XL, Tektronix

Iprober520, Aim-TTi

FAQs