Energy Measurement ICs

MCP3909 Energy Measurement ICs Energy/Power Measurement - Microchip

ADE7880, Polyphase Multifunction Energy Metering IC, Analog Devices The ADE7880 from Analog Devices is a high accuracy, 3-phase electrical energy measurement IC with serial interfaces and three flexible pulse outputs. The device incorporates second-order sigma-delta (Σ-Δ) analogue-to-digital converters (ADCs), a digital integrator and reference circuitry. In addition this device has the signal processing required to perform energy measurement and rms calculations. A fixed function digital signal processor (DSP) executes this processing, with the DSP program being stored in the internal ROM memory. Features Highly accurate – supports IEC 62053-21, IEC 62053-22, IEC 62053-23, EN 50470-1, EN 50470-3, ANSI C12.20, and IEEE1459 standards Supports IEC 61000-4-7 Class I and Class II accuracy specification Compatible with 3-phase, 3 or 4-wire (delta or wye) and other 3-phase services Supplies rms, active, reactive and apparent powers, power factor, THD, and harmonic distortion of all harmonics within 2.8 kHz pass band on all phases Supplies rms and harmonic distortions of all harmonics within 2.8 kHz pass band on neutral current Battery supply input for missing neutral operation Reference: 1.2 V (drift 10 ppm/°C typical) with external overdrive capability Less than 1% error in harmonic current and voltage rms, harmonic active and reactive powers over a dynamic range of 2000 to 1 at TA = 25°C Less than 0.1% error in active and fundamental reactive energy over a dynamic range of 1000 to 1 at TA = 25°C Less than 0.2% error in active and fundamental reactive energy over a dynamic range of 5000 to 1 at TA = 25°C Less than 0.1% error in voltage and current rms over a dynamic range of 1000 to 1 at TA = 25°C Typical applications Energy metering systems Power quality monitoring Solar Inverters Process monitoring Protective devices Energy/Power Measurement - Anal...

ADE7854/7858/7868/7878 Series, Polyphase Multifunction Energy Metering IC, Analog Devices The ADE7854, ADE7858, ADE7868, and ADE7878 from Analog Devices are high accuracy, 3-phase electrical energy measurement ICs with serial interfaces and three flexible pulse outputs. Incorporated into these devices are second-order sigma-delta (Σ-Δ) analogue-to-digital converters (ADCs), a digital integrator and reference circuitry. In addition these ICs have the signal processing required to perform energy measurement and rms calculations. A fixed function digital signal processor (DSP) executes this processing, with the DSP program being stored in the internal ROM memory. Features Highly accurate – supports EN 50470-1, EN 50470-3, IEC 62053-21, IEC 62053-22, and IEC 62053-23 standards Compatible with 3-phase, 3 or 4-wire (delta or wye), and other 3-phase services Supports current transformer and di/dt current sensors Supplies sampled waveform data on all three phases and on neutral current Selectable no load threshold levels for total and fundamental active and reactive powers, as well as for apparent powers Battery supply input for missing neutral operation Phase angle measurements in both current and voltage channels with a typical 0.3° error Flexible I 2 C, SPI, and HSDC serial interfaces Less than 0.1% error in active and reactive energy over a dynamic range of 1000 to 1 at TA = 25°C Less than 0.2% error in active and reactive energy over a dynamic range of 3000 to 1 at TA = 25°C Less than 0.1% error in voltage and current rms over a dynamic range of 1000 to 1 at TA = 25°C Energy/Power Measurement - Analog Devices

Energy Metering ICs Energy/Power Measurement - Microchip

Energy/Power Measurement, Analog Devices Energy/Power Measurement - Analog Devices

Single Phase, Bi-directional Power/Energy, Cirrus Logic Sensor Interfaces, Cirrus Logic

Energy/Power Measurement, Analog Devices Energy/Power Measurement - Analog Devices